山楂叶中熊果酸提取工艺研究

以熊果酸的提取率为指标,采用单因素与正交实验相结合的方法对提取工艺进行了优化,得到最佳提取参数为:乙醇体积分数95%、提取温度85℃、提取时间110min、液固比5:1、提取次数3次。在该条件下,熊果酸提取率为93.47%。该工艺简单合理,为工业生产提供了理论参考。     

神东上湾煤矿综采工作面开机率分析

本文介绍了神东公司上湾煤矿综采工作面生产情况,统计了工作面的进刀、割煤、跑空刀时间,计算了工作面开机率并对如何提高开机率进行简单分析.对于其它综采面如何提高开机率、产量及效率有一定的参考和借鉴.     

煤层注水降低综采工作面粉尘浓度的研究

通过对煤层注水减尘原理和煤层注水方式的研究,分析钱家营矿以煤层注水为工作面综合防尘措施,提出以煤层注水为工作面综合防尘的主要手段,采取先进的打钻、封孔、注水等方法,可提高煤层注水效果,从而有效的降低工作面煤尘浓度,改善工作面作业环境.     

单重工作休假M/M/c排队驱动的流体模型分析

该文在M/M/c排队驱动系统中加入工作休假策略,研究了单重工作休假多服务台排队驱动的流体模型.利用拟生灭过程和矩阵几何解法得到驱动系统稳态队长分布.构建净输入率结构,导出流体模型的稳态联合分布函数满足的的矩阵微分方程组,进而利用Laplace-Stieltjes变换(LST)方法得到稳态下缓冲器库存量的空库概率及均值表...     

三相交流电机的受控源等效电路及其分析

根据动态磁耦合电路的观点分析三相隐极型电机定子绕组、转子绕组以及它们之间的关系,得到了电机定、转子分离的受控源电路模型,并通过该电路模型分析电机的各种工作状态.     

Geometry Optimization of Thermoelectric Modules: Deviation of Optimum Power Output and Conversion Efficiency

Besides the material research in the field of thermoelectrics, the way from a material to a functional thermoelectric (TE) module comes alongside additional challenges. Thus, comprehension and optimization of the properties and the design of a TE module are important tasks. In this work, different geometry optimization strategies to reach maximum power output or maximum conversion efficiency are applied and the resulting performances of various modules and respective materials are analyzed. A Bi₂Te₃-based module, a half-Heusler-based module, and an oxide-based module are characterized via FEM simulations. By this, a deviation of optimum power output and optimum conversion efficiency in dependence of the diversity of thermoelectric materials is found. Additionally, for all modules, the respective fluxes of entropy and charge as well as the corresponding fluxes of thermal and electrical energy within the thermolegs are shown. The full understanding and enhancement of the performance of a TE module may be further improved.     

工质对微通道沸腾液膜瞬态变化的影响

本文采用去离子水和无水乙醇两种工质,利用微通道流动沸腾同步测量实验系统,研究了液膜厚度的瞬态变化规律,实验发现流动沸腾形成的初始液膜厚度在毛细数Ca很宽的范围内都遵循Taylor流动原理;液膜形成后,在蒸发和蒸汽流动携带的耦合作用下,厚度迅速减薄直至蒸干;由于水的汽液黏度比小,速度梯度小,剪切作用带来的液膜厚度减少量小,且水的汽化潜热大,吸收相同热量时蒸发量小,导致水的液膜厚度变化斜率较小,通过理论分析提出了沸腾液膜厚度变化的计算模型,计算结果与实验结果的误差小于20%。     

CROSS-LINKING OF AROMATIC POLY（THIOETHER）S

A novel cross-linking process using two high molecular weight aromatic poly(thioether)s,which were synthesized by the reactions of 4,4′-thiobisbenzenethiol with 4,4′-difluorobenzophenone and 4,4′-difluorodiphenylsulfone,respectively, and commercially available lower molecular weight poly(p-phenylene sulfide)was investigated.These reactions were carried out in bulk by the addition of silver tetrafluroborate andα,α′-dibromo-p-xylene at 190℃over a period of 45 min. Furthermore,the same procedure could be modified to cross-link compression-molded films of these three polymers.The thermal and solubility behaviors of these polymers before and after cross-linking reactions,are presented.     

含磷有机硅杂化环氧树脂固化体系性能研究

通过磷酸与γ-环氧丙氧基三甲氧基硅烷反应得到含磷有机硅氧烷,并加入到环氧树脂/4,4'-二氨基二苯基甲烷体系中混合,通过溶胶-凝胶的方法制备了含磷有机硅杂化环氧树脂固化物.对固化体系进行了玻璃化转变温度、热失重、阻燃、拉伸强度、冲击强度测试分析.结果表明,该固化体系的阻燃性得到提高,极限氧指数在25.8～29.3,玻璃化转变温度得到提高,在161～179℃;虽然初始分解温度比纯环氧树脂固化物低,但800℃残炭率可以达到26.5%,提高了36%;拉伸强度得到提高,在71～94 MPa,冲击强度可以达到14.36 kJ/m2,提高了14%.该固化体系具有较好的阻燃性能和热性能,同时具有较好的力学性能.     

An automated monitoring system for VOC ozone precursors in ambient air: development,implementation and data analysis

An automated system for the monitoring of volatile organic compound (VOC) ozone precursors in ambient air is described. The measuring technique consists of subambient preconcentration on a cooled trap followed by thermal desorption and GC/FID analysis. First, the technical development, which permits detection limits below 0.05 ppbv to be reached, proceeded in two steps: (1) the determination of optimum sampling parameters (trap composition and conditioning, outlet split, desorption temperature); (2) the development of a reliable calibration method based on a highly accurate standard. Then, a 4-year field application of the hourly measuring chain was carried out at two urban sites. On the one hand, quality control procedures provided the best VOC identification (peak assignment) and quantification (reproducibility, blank system control). On the other hand, the success and performances of the routine experience (88% of the measurements covered more than 40 target compounds) indicated the high quality and suitability of the instrumentation which is actually applied in several French air quality monitoring networks. Finally, an example of data analysis is presented. Data handling identified important organic compound sources other than vehicle exhaust.