Effects of processing parameters on the mechanical properties of polypropylene random copolymer

The mechanical properties of polypropylene random copolymer (PP-R) with different processing parameters were studied. Special attention is devoted to the investigation of the influence of masterbatch addition on the variation in the mechanical properties of injection moulded PP-R. Tensile, instrumented Charpy impact, Shore D hardness, differential scanning calorimeter (DSC) and Vicat softening temperature (VST) tests were conducted on the test samples containing different colour masterbatches varying from 0.5 to 10 wt%. The observed changes in the mechanical behaviour are explained by the type and level of masterbatch content. The natural UV weathering performance of the PP-R material was studied from the masterbatch type point of view. The effect of processing parameters on material performance was studied on samples which were directly obtained from extruded pipes and on injection moulded samples.

Finally, the effects of storage time on the polymer properties were investigated.     

Measurement of rheological properties of corn stover suspensions

Corn stover is currently being evaluated as a feedstock for ethanol production. The corn stover suspensions fed to reactors typically range between 10 and 40% solids. To simulate and design bioreactors for processing highly loaded corn stover suspensions, the rheologic properties of the suspension must be measured. In systems with suspended solids, rheologic measurements are difficult to perform owing to settling in the measurement devices. In this study, viscosities of corn stover suspensions were measured using a helical ribbon impeller viscometer. A calibration procedure is required for the impeller method in order to obtain the shear rate constant, k, which is dependent on the geometry of the measurement system. The corn stover suspensions are described using a power law flow model.     

Hydrolysis of (CH3)3Sn+ in Various Salt Media

The hydrolysis of trimethyltin(IV) has been studied by potentiometry (H⁺ -glass electrode) and calorimetry in various salt media (NaNO₃, NaCl, KCl, Na₂SO₄, and NaNO₃—NaCl mixtures). The effect of ionic strength on the hydrolysis constants is accounted for by a simple Debye–Hückel type equation and by Pitzer equations. The results allow us to obtain H for hydrolysis and the temperature dependence of the Pitzer parameters. The resulting coefficients can be used to examine the speciation of (CH₃)₃Sn⁺ in multicomponent electrolyte solutions, such as natural waters, over a wide range of temperature and ionic strength.     

Analysis of long-term distributions of calibration parameters and calibration intervals for an atomic absorption spectrophotometer

 A combination of "black box" and "calendar-time" methods for the determination of calibration intervals of an analytical measuring instrument is discussed. Since the methods require information on the distributions of the calibration parameters, such information is described for an atomic absorption spectrophotometer, as an example. The hypotheses on the normal distribution of the calibration parameters are tested using the ω²-criterion and accepted at 0.90–0.95 levels of confidence. Corresponding control charts are designed for indication of warning and action limits of the calibration parameters, and diagnoses of outliers in further calibrations. Control charts indicate also when the calibration should be done according to the full program of the equipment manufacturer. Received: 15 April 2000 / Accepted: 24 July 2000     

RATE OF INTRA-MOLECULAR CONTACT FORMATION IN SHORT TWO-DIMENSIONAL COMPACT POLYMERS CHAINS

It is important to know the rate of intra-molecular contact formation in proteins in order to understand how proteins fold clearly. Here we investigate the rate of intra-molecular contact formation in short two-dimensional compact polymer chains by calculating the probability distribution p(r) of end-to-end distance r using the enumeration calculation method and HP model on two-dimensional square lattice. The probability distribution of end-to-end distance p(r) of short two-dimensional compact polymers chains may consist of two parts, i.e. p(r) = p1(r) p2(r), where p1(r) and p2(r) are different for small r. The rate of contact formation decreases monotonically with the number of bonds N, and the rate approximately conforms to the scaling relation of k(N) ∝ N-α. Here the value of α increases with the contact radius a and it also depends on the percentage of H (hydrophobic) residues in the sequences of compact chains and the energy parameters of εHH, εHP and εPP . Some comparisons of theoretical predictions with experimental results are also made. This investigation may help us to understand the protein folding.     

Analysis on absorption spectra of Nd in poly(methyl methacrylate)

The absorption spectrum of neodymium (III) (Nd³⁺ doped in poly(methyl methacrylate) was measured. The Nephlauxetic effect was found in the spectrum compared to other spectra of Nd³⁺ doped in various matrices. The experimental data used, Slater-Condon parameters (F₂,F₄,F₆) and Lander parameter (ζ_4f) were calculated by the Taylor series expansion based on the assumption that the energy separation between J-levels of the 4fⁿ-configuration is a function of F₂,F₄,F₆ and ζ_4f. The Judd-Ofled intensity parameters (Ω₂,Ω₄,Ω₆) were also calculated. Analysis of the Nephlauxetic effect and the parameters variation on the host matrices was carried out.     

反应条件对煤加氢热解产物分布的影响

本文以内蒙古红庙煤为研究对象，在温度４５０－６５０℃和氢氯压力２－５ＭＰＡ的范围内，在加压固定床反应器上考察了各种因素包括传质作用对煤加氢热解产物分布的影响。研究表明，转化率和焦油收率随最终反应温度，氢气压力和流速的升高而升高，随加速速率的增大而降低。     

Polarographic Behaviour and Determination of Kinetic Parameters of Lead-Pamoate Complex in Dimethyl Sulfoxide

The polarography of lead ion in dimethyl sulfoxide (DMSO) was investigated in the DMSO concentration range 0–80 vol.%. The complex species identified were Pb₂(DMSO)⁴⁺₃, Pb(DMSO)²⁺₃ and Pb(DMSO)²⁺₆ in [DMSO]<10 vol.%, 10< [DMSO]<43 vol.% and [DMSO]>43 vol.%, respectively. In the presence of pamoic acid, the reduction of lead ion in DMSO was two-electron reversible diffusion-controlled at pH≤6.0, but it became irreversible at pH>6.0. The complex species identified was Pb(D_m)₂(P_m)₃(OH)^6? at pH>6.0. The rate constants of electro-reduction and electro-oxidation, activation energies were determined. The hydrolysis constants of lead ion in dimethyl sulfoxide concentration 40–70 vol.% at pH 4.5–6.0 were found to be of the order of 10^?6. The stability constants of the Pb(DMSO)²⁺₃ and Pb(DMSO)²⁺₀ were also determined to be of the orders of 10¹ and 10⁵, respectively.     

可调移动重叠分离图法用于高效液相色谱多台阶梯度分离条件优化的研究

计算机辅助高效液相色谱（HPLC）分离条件优化可以低成本、快速地得到优化的分离条,因而已较为广泛地用于复杂样品的分离分析。基于移动重叠分离图方法,又发展了一种新型的多台阶梯度分离条件的优化方法可调移动重叠分离图法。该方法通过预测不同流动相条件下各组分的保留时间、峰宽和分离度,绘制出对于样品中各组分的重叠分离区域图。在对当前台阶流动相组成进行优化的同时,考虑其对后面一到两个台阶上流出组分保留的影响,实时地重新绘制对于后面台阶上流出组分的重叠分离区域图。通过观察当前台阶流动相条件对当前台阶和后面台阶上流出组分分离的影响,综合考虑样品中所有组分的分离情况,找到更接近全局最优的分离条件。通过扫描的方法对优化得到的分离条件进行微调,能够进一步提高分离效果。采用文献数据对可调移动重叠分离图法的应用加以说明,在二元流动相体系下,证明了该方法在HPLC方法建立方面的优越性。     

Calorimetric study of thermodynamics of production of polybutene-1, polypentene-1, 4-methylpentene-1 and properties of reagents between 0 and 670 K

The heat capacitiesC ₀ ^p of polybutene-1, polypentene-1, poly-4-methylpentene-1 and 4-methylphentene-1 were studied calorimetrically from 6 to (500–700) K. Temperatures, enthalpies of melting of various crystalline forms and the parameters of the glass transition were determined. The thermodynamic functionsH ⁰(T)?H⁰(0), S⁰(T) andG ⁰(T)?H⁰ (0) were calculated between 0 K and (500–700) K. From the calorimetric values obtained and literature data, the thermodynamic characteristics of the following processes were estimated for the corresponding alkenes-1, andcis-andtrans-alkenes-2: the polymerization of alkenes-1, the monomer-isomerization polymerization ofcis- andtrans-alkenes-2 to polyaklenes-1 and the isomerization ofcis- andtrans-aklenes-2 to alkenes-1 in the same temperature interval at standard pressure.