焙烧温度对铁基催化剂催化浆态床F-T合成反应性能的影响

 采用连续共沉淀与喷雾干燥成型技术相结合的方法制备了微球形Fe-Cu-K-SiO2催化剂,并考察了焙烧温度对催化剂的结构和织构性质的影响. 结果表明,催化剂具有较好的织构和结构热稳定性,粘结剂SiO2起到了分散和稳定α-Fe2O3晶相的作用. 随着焙烧温度的升高,催化剂的比表面积逐渐减小,α-Fe2O3晶粒逐渐增大,催化剂体相中的Cu和K原子向表面富集,且Cu向表面的迁移更明显; 同时,催化剂中的α-Fe2O3和CuO相发生了一定程度的离析,Cu的助剂作用减弱,使催化剂在合成气气氛下难于还原碳化. 催化剂在n(H2)/n(CO)=0.67,GHSV=2.0 L/(g·h),p=1.5 MPa和θ=250 ℃下的浆态床F-T合成反应评价结果表明,升高焙烧温度,催化剂的初活性和最高活性下降,但运行稳定性提高,而且有效地抑制了CH4的生成,明显促进了烃产物向高碳数方向移动. 反应600 h后卸载下的催化剂的形貌观测表明,催化剂的磨损主要是由化学磨损引起的,提高焙烧温度可明显改善其抗磨损性能,焙烧温度高于400 ℃时,催化剂具有较好的抗磨损性能.     

Analysis of the temperature dependence of the high-frequency EMR spectra of Mn ions in the lithium-ion battery material LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript>

This paper deals with the analysis of the temperature dependence of high-frequency EMR (HF-EMR) spectra due to Mn³⁺ and Mn⁴⁺ ions in the lithium manganese spinel LiMn₂O₄. A range of powder samples obtained by the sol-gel method with calcinations in several temperature ranges were prepared for this study. Based on the initial characterization carried out by a number of techniques, the physicochemical and structural properties of the samples were earlier determined. Independently, temperature magnetization and HF-EMR measurements were carried out. The EMR spectra vary strongly between samples, indicating possible structural or chemical changes. Quantitative analysis of the temperature dependence of the HF-EMR spectra due to Mn³⁺ and Mn⁴⁺ ions in LiMn₂O₄ is presented in this paper. The spectral analysis concerns the line shape, linewidth, intensity and g-factors. Fittings using the Lorentzian spectral shape and, to a certain extent, the Gaussian spectral shape have been carried out in order to parameterize the temperature dependence of the HF-EMR spectra. This parameterization of the HF-EMR experimental data enables a deeper characterization of the samples. Subsequently, a better insight into the role of the Mn³⁺ and Mn⁴⁺ ions in accounting for the characteristics most suitable for application of LiMn₂O₄ as a cathode material may be gained.     

Effect of core-shell micelle formation on the redox properties of phenothiazine-labeled poly(ethyl glycidy ether)-block-poly(ethylene oxide)

Redox properties of phenothiazine-labeled poly(ethyl glycidy ether)-block-poly(ethylene oxide) (PT-EGE_n-b-EO_m) are reversibly changed by core-shell micelle formation. In the temperature range higher than the critical micellization temperature (cmt), the anodic potential of PT group positively shifts and concomitantly its anodic current decrease, or levels off compared to those of the reference polymer PT-EO_m without the thermo-responsive EGE_n segment. The former alteration is caused by incorporation of hydrophobic PT groups into a core of the micelle and the latter by the decrease in the diffusion coefficient of PT groups due to formation of the core-shell micelles. The cmt value and the temperature-dependent alteration in the redox properties strongly depend on the polymer structure, especially the length of thermo-responsive EGE_n segment. The electrochemically determined hydrodynamic radii of the polymer aggregates seem to be overestimated, compared to the values reported for the aggregates of other thermo-responsive polymers with similar molecular weights, implying the presence of electrochemically inactive PT groups in the copolymers having longer thermo-responsive segments.     

Effect of Variant Counterions on Stability and Particle Size of Silica Sol

The effects of variant counterions with ionic strength of 0.05, 0.10, 0.20 and 0.25 mol·kg^-1 on the stability and particle size of silica sols have been studied using the traditional methods of Ubbelohde viscosity measurement, TEM and titration respectively, finding that the stability and particle size of the silica sols are all concerned with the acidic, positively electric properties and the sizes of the counterions, as well as the attraction between the counterions and surface silicon hydroxyl groups of the silica sols. The small positively charged counterions lead to the decrease in particle sizes, making the silica sol the most stable. But the larger weakly acidic counterions can restrict the particle sizes of the silica sols and easily make the sols coagulate. It was also found that there existed a linear relationship between log r and log η, which has not ever been reported. The effect of temperature on the stability and particle sizes was also discussed.     

A New 4.0-Generation Dendrimer Phosphorescence Labeling Reagent and Its Application to Determination of Trace Alkaline Phosphatase by Affinity Adsorption Solid Substrate-room Temperature Phosphorimetry

A Triton X-100-4.0G-D （4.0G-D refers to a 4.0-generation dendrimer） was brought forward as a new phosphorescence labeling reagent. Two types of specific affinity adsorption （AA） reactions （direct method and sandwich method） were carried out between the labeling product of Triton X-100-4：0G-D-Wheat germ agglutinin （WGA） and alkaline phosphatase （ALP）, the product of AA reaction preserved the good characteristics of room temperature phosphorescence （RTP） of 4.0G-D and △Ip of the product was proportional to the content of ALP. According to the fact stated above, a new method for the determination of trace ALP by affinity adsorption solid substrate-room temperature phosphorimetry （AA-SS-RTP） was established on the basis of WGA labeled with the Triton X-100-4.0G-D. The detection limits were 0.20 ag·spot^-1 （corresponding concentration： 5.0×10^-16 g·mL^-1, namely 5.0×10^-18 mol·L^-1） for a direct method and 0.14 ag·spot^-1 （corresponding concentration： 3.5×10^-16 g·mL^-1, namely 3.5×10^-18 mol·L^-1） for a sandwich method, respectively. For their high sensitivity, good repeatability and high accuracy, the direct method and sandwich method have been successfully appfied to determine the content of ALP in human serum, and the results were coincided with the clinical detection results of the enzyme-linked immunosorbent assay method by the Zhangzhou Hospital of Traditional Chinese Medicine. Meanwhile, the mechanism for the determination of trace ALP by AA-SS-RTP was discussed.     

EFFECTS OF COUPLING AGENTS ON THE CRYSTALLIZATION BEHAVIOR OF PP/T-ZnOw COMPOSITES

The objectives of this paper are to understand the crystallization behavior of polypropylene(PP)composites with surface modified tetra-needle-shaped zinc oxide whisker(T-ZnOw).T-ZnOw was surface modified with different coupling agents,such as silane coupling agents(KH-550,KH-560)and titanate coupling agent(NDZ-105),in order to improve the compatibility between PP and T-ZnOw.DSC and POM were used to characterize the melt and crystallization behavior and the crystalline structures of the composites,respectively.The results show that the surface modified T-ZnOw acts as a nucleating agent of PP crystallization,depending on the coupling agent used for modification.KH-550 and KH-560 have more apparent role in improving the interfacial interaction than NDZ-105 and induce PP crystallization at higher temperature and with smaller spherulites size.The results also suggest that the crystallization behavior depends on not only the content of coupling agent,but also the content of the surface modified T-ZnOw used in the composites.     

温度对聚酰胺-胺树形分子模板法制备CdS量子点的影响

为了研究温度对聚酰胺-胺(PAMAM)树形分子的模板法制备硫化镉(CdS)量子点的影响, 以4.5代(G4.5, 64个甲酯端基)PAMAM树形分子为模板, 在－10～30 ℃的温度范围内制备了分散良好的CdS量子点. 用透射电子显微镜(TEM)表征了CdS量子点的形貌、尺寸; 用紫外-可见光谱(UV-Vis)和光致发光光谱(PL)表征了CdS量子点的光学性能. 发现在相同条件下, 制备温度从－10 ℃升高到30 ℃, CdS量子点粒径从1.8 nm增大到3.4 nm, 其中在10 ℃时制备的量子点的尺寸分布最窄; CdS量子点的吸收和发射光谱均随温度增大而红移, 其中10 ℃时制备的量子点的室温光致发光效率最高. 这表明制备温度决定了树形分子的配位基团与Cd^2＋的分离速度, 并影响了CdS量子点的成核和生长过程, 从而最终决定了CdS量子点的尺寸及尺寸分布、光致发光颜色和发光效率.     

纳米氧化铜的制备及常温脱硫效能研究

采用硝酸铜为原料、氢氧化钠溶液为沉淀剂、使用体积比为1∶1的乙醇-水溶液为分散剂的直接沉淀法制备，通过改变工艺条件得到了三种纳米氧化铜产品，平均粒径分别为25.63，10.74和7.57 nm。采用TG-DTA、FIR、XRD和TEM等对纳米氧化铜进行表征。对产品的常温脱硫活性进行了穿透试验，并与已开发的其他常温精脱硫产品进行了比较，结果表明纳米氧化铜应用于H₂S脱硫，可在常温条件下具有优异的脱硫活性，对H₂S的脱除精度可以达到0.05 mg·m^-3以下。经过优选，产品在3 000 h^-1空速下穿透硫容达到25.3%，高于同类型的其他脱硫剂产品。     

辐照温度对聚芳醚酮辐射交联行为的影响

<正> 可溶性含酚酞侧基聚芳醚酮(PEK-C)是一种新型的具有耐高温、耐水解、耐化学腐蚀、自润滑性能的工程塑料,它具有如下结构:     

Temperature measurements by H2-CARS in the reactive zone of a plasma test reactor for hydrocarbon synthesis

The application of coherent anti-Stokes Raman spectroscopy (CARS) to an electric are test reactor is described in which acetylene synthesis in analogy to the large-scale industrial process is .studied. We report on spatially resolved measurements of H₂-CARS spectra, the comparison with calculated spectra, and the determination of temperatures in the reaction zone.Dedicated to Prof. Rudolf Wienecke on the occasion of his 65 birthday.