电纺ZnO纳米纤维电子传输层提高倒置PTB7∶PC70BM电池效率

研究利用静电纺丝制备的不同直径ZnO纳米纤维作为倒置结构有机太阳能电池的电子传输层对器件转化效率的影响。首先通过静电纺丝技术成功制备了半径在43～110 nm之间的ZnO纳米纤维,然后将ZnO纳米纤维作为电子传输层加入到倒置结构有机太阳能电池（ITO/ZnO∶ZnO nanofiber/PTB7∶PC₇₀BM/MoO₃/Al）。与平面结构的ZnO电子传输层相比,ZnO纳米纤维具有比表面积大等优点,增加了电子传输和抽取能力,提高了器件的光电转化效率。实验发现ZnO纳米纤维的直径越小,电池效率越大。当ZnO纳米纤维直径为(46±5)nm,接收时间为30 s时,作为电子传输层的电池效率提高了8%。     

土壤碱解氮含量可见/近红外光谱预测模型优化

可见/近红外光谱技术是土壤成分检测的有效工具。波长筛选对可见/近红外模型土壤属性的预测精度有重要影响。以宁夏吴忠地区75个水稻土样为研究对象,利用可见/近红外光谱技术采集土壤样品光谱,采用SPXY （Sample set partitioning based on joint X-Y distance）方法选取了校正集和预测集样本,比较了分别采用Savitzky Golay平滑（SG smoothing）、多元散射校正（Multiple scatter correction,MSC）、标准正态变量变换（Standard normal variate,SNV）3种预处理方法对光谱数据处理后建立土壤碱解氮偏最小二乘法模型和原始光谱数据建模的效果。在此基础上,分别采用遗传算法（Genetic gorithms,GA）、连续投影算法（Successive projections algorithm,SPA）、竞争性自适应重加权算法（Competitive adaptive reweighted Sampling,CARS）、随机蛙跳（Random frog,RF）进行波长筛选,最后应用偏最小二乘法建立基于不同波长筛选方法的土壤碱解氮含量预测模型。研究表明,由于仪器性能稳定,样品的颗粒度比较小和均匀,本次实验原始光谱数据建模效果最好;各种波长筛选方法均可有效减少参与建模的波长数,且连续投影算法优于全谱建模,所选波长数仅为全谱波长数的1%,其预测决定系数（R²）、预测均方根误差和相对分析误差值分别为0.726,3.616,1.906。这表明连续投影算法可以有效筛选水稻土碱解氮敏感波段,为土壤碱解氮传感器开发提供技术支持。     

Bioinspired Nanozymes with pH‐Independent and Metal Ions‐Controllable Activity: Field‐Programmable Logic Conversion of Sole Logic Gate System

In nature, different environmental factors make organisms to be programmed into different forms. However, it is difficult and significant to realize the field‐programmable logic conversion of sole logic system for molecular logic gates. Here, the concept of pH‐programmable “logic conversion” on the single logic gate based on the peculiar enzyme‐mimicking activity is presented. Inspired by natural enzymes with high pH‐stability and metal ions‐stimulated activity, pH‐independent and metal ions‐controllable catalase mimics (Co₃O₄ nanozymes) are designed by protein‐directed method. Although pH cannot directly change the activity of nanozymes, pH can change the existence state of metal ions and then the electron transfer rate on nanozymes. So, versatile roles of metal ions for catalase‐like and electrocatalytic activities are discovered on the premise of pH‐independency. For the proof‐of‐concept, OR/INHIBIT‐ and INHIBIT/AND‐switchable logic gates are facilely constructed using pH as the environmental stimulus and metal ions as inputs. Hence, the transformation of logic gate functions is realized without the change of logic gate elements and input molecules. This contribution may not only broaden the species and application area of nanozymes, but also open novel avenues for the molecular logic conversion and the metal ions sensor.     

基于方波脉冲外场的超冷原子-分子绝热转化

基于受激拉曼绝热通道技术,研究了方波脉冲外场下的超冷原子-双原子分子转化.运用绝热保真度的方法,详细分析了该原子-分子转化系统相干布居俘获态的动力学演化过程.研究发现,相干布居俘获态的最终绝热保真度随脉冲激光强度的变化呈现出大幅度的周期振荡.这表明本文所设计的方波脉冲方案与高斯脉冲方案相比具有明显的优势,可以在较小的脉冲激光强度下达到较高的绝热保真度并实现较高效率的超冷原子-分子转化.     

基于带电粒子活化法开展的SGⅡ-U皮秒激光质子加速实验研究

基于带电粒子活化测谱方法在SGⅡ-U装置上开展了皮秒激光靶背鞘场机制质子加速实验研究,对靶参数进行了优化.利用带电粒子活化测谱方法测量了相同激光条件、不同Cu薄膜靶厚度情况下靶背鞘场加速质子的最高截止能量、角分布、总产额以及激光能量到质子的转化效率等关键参数.实验发现,SGⅡ-U皮秒激光靶背鞘场加速机制的最佳Cu薄膜靶厚度为10 μm,对应质子最高能量接近40 MeV,质子（>4 MeV）总产额约4×10¹²个,激光能量到质子的转化效率约2%.薄膜靶更厚或者更薄都会降低加速质子的最高截止能量;当靶厚减薄至1 μm时,皮秒激光的预脉冲开始对靶背鞘场产生显著影响,质子最高截止能量急剧下降,高能质子束斑呈现空心结构;而当靶厚增加至35 μm时,虽然质子束的能量有所降低,但是质子束斑的均匀性更好.     

利用声光效应测量波长的设计与研究

提出了利用声光效应原理来测量激光波长的方案.基于声光Bragg衍射效应原理,利用比较法,以He-Ne激光波长作为基准波长,推导出待测激光波长与与衍射光斑间距的关系式.据此设计了未知激光的波长的方案,并对两种波长的激光波长进行了测量,结果表明测量值和理论值之间的误差小.     

Role of entropy generation minimization in thermal optimization

Thermal optimization is very important for improving the performances of thermal systems. In engineering, the entropy generation minimization(EGM) has been widely used to optimize and evaluate the performances of thermal systems.However, the consistency between the EGM and the optimization objective should be specified when the EGM is used.In this paper, we discuss the view angle of irreversibility of entropy generation, and show that entropy generation directly reflects the exergy destruction or the ability loss of doing work. As the design objective in a thermal system is not often consistent with the view angle of irreversibility of entropy generation, the EGM may not lead to the optimal value of the design objective. In heat transfer and heat-work conversion, the inconsistence between the design objectives and the EGM is shown with some examples, and the applicability of the EGM is found to be conditional. The "entropy generation paradox" in heat exchanger analyses is also discussed, and it is shown that there is no direct monotonic relation between the minimum entropy generation rate and the best heat transfer performance of heat exchangers.     

Studies on convergence and scaling law of Thomson backscattering spectra in strong fields

With the saddle point analysis method for the Bessel function structure and property, the convergence problem and the scaling laws of Thomson backscattering spectra are solved and studied in both cases that are for the plane wave laser field without and with applied external constant magnetic field. Some unclear points appeared in previous work are clarified. The extension of the method to a general situation for the laser field with an arbitrary polarization is discussed. We also make a simple analysis and discussion about the optimal spectra dependence of field parameters and its implication to practical applications.     

Flexible Manipulation of the Polarization Conversions in a Structured Vector Field in Free Space

The conversion between different polarizations generally requires an optical element or an optical system. We demonstrate, theoretically and experimentally, that the conversion between different states of polarization (SoP) can be flexibly manipulated in a structured optical field by itself. During the structured optical field propagation in free space, any two orthogonal polarizations can be generated and auto‐focus at any desired propagation positions by purposely designing the initial SoP distribution and a caustic phase in the field cross‐section. The experiment arrangement combines a caustic‐based approach and a 4f optical system. This approach provides a way to flexibly manipulate the polarization conversions in free space propagation by the optical field itself (without any physical element along the propagation path), may lead to more complex and flexible vectorial manipulations of an optical field scenarios and potential applications in corresponding areas.     

超颖表面原理与研究进展

超颖表面是一种特殊的二维亚波长阵列结构,具有很强的光场调控能力,兼有超薄、低损耗、易加工等优势,表现出广阔应用前景,近些年吸引了广泛的研究兴趣。本文将综述超颖表面的原理与研究进展,简要分析已报道的超颖表面类型,并重点介绍其在广义折反射、偏振转换、光束轨道角动量操控以及计算全息中的应用。超颖表面设计灵活、功能强大,有望在诸多应用中取代传统光电器件。未来基于超颖表面的新型、宽带、高效率、多功能以及主动可调功能器件等将是其重要的发展方向。