Colloidal forces between bitumen surfaces in aqueous solutions measured with atomic force microscope

Colloidal forces between bitumen surfaces in aqueous solutions were measured with an atomic force microscope (AFM). The results showed a significant impact of solution pH, salinity, calcium and montmorillonite clay addition on both long-range (non-contact) and adhesion (pull-off) forces. Weaker long-range repulsive forces were observed under conditions of lower solution pH, higher salinity and higher calcium concentration. Lower solution pH, salinity and calcium concentration resulted in a stronger adhesion forces. The addition of montmorillonite clays increased long-range repulsive forces and decreased adhesion forces, particularly when co-added with calcium ions. The measured force profiles were fitted with extended DLVO theory to show the repulsive electrostatic double layer and attractive hydrophobic forces being the dominant components in the long-range forces between the bitumen surfaces. At a very short separation distance (less than 4–6 nm), a strong repulsion of steric origin was observed. The findings provide a fundamental understanding of bitumen emulsion stability and a mechanism of bitumen “aeration” in bitumen recovery processes from oil sands.     

On the equation of state of classical one-component systems with long-range forces

Several definitions of the pressure are introduced for one-component systems and shown to be nonequivalent in the presence of a rigid neutralizing background. Relations between these pressures are derived for finite and infinite systems; these relations depend on the asymptotic behavior of the force at infinity, with the Coulomb force at the borderline between different properties. It is argued that only one of those definitions is physically acceptable and its properties are discussed in relation to the asymptotic behavior of the force. It is seen in particular that a knowledge of the state of the infinite system is not sufficient to determine its thermodynamic properties. The results are illustrated by some typical examples.For example, for two-dimensional systems with three-dimensional Coulomb interaction see refs. 2–4.     

Interactions between Adsorbed Layers of a Low Charge Density Cationic Polyelectrolyte on Mica in the Absence and Presence of Anionic Surfactant

Interactions between two negatively charged mica surfaces across aqueous solutions containing various amounts of a 10% charged cationic polyelectrolyte have been studied. It is found that the mica surface charge is neutralized when the polyelectrolyte is adsorbed from a 10–50 ppm aqueous solution. Consequently no electrostatic double-layer force is observed. Instead an attractive force acts between the surfaces in the distance regime 250–100 Å. We suggest that this attraction is caused by bridging. Additional adsorption takes place when the polyelectrolyte concentration is increased to 100 and 300 ppm, and a long-range repulsion develops. This repulsive force is both of electrostatic and steric origin. The polyelectrolyte layer adsorbed from a 50 ppm solution does not desorb when the polyelectrolyte solution is replaced with an aqueous polyelectrolyte-free solution. Injection of sodium dodecyl sulfate (SDS) into the measuring chamber to a concentration of about 0.01 CMC (8.3 × 10⁻⁵M) does not affect the adsorbed layers or the interaction forces. However, when the SDS concentration is increased to 0.02 CMC (0.166 mM) the adsorbed layer expands dramatically due to adsorption of SDS to the polyelectrolyte chains. The sudden swelling suggests a cooperative adsorption of SDS to the preadsorbed polyelectrolyte layer and that the critical aggregation concentration between the polyelectrolyte and SDS at the surface is about 0.02 CMC. The flocculation behavior of the polyelectrolyte in solution upon addition of SDS was also examined. It was found that 0.16–0.32 mol SDS/mol charged segments on the polyelectrolyte is enough to make the solution slightly turbid.     

Lattice dynamical study of body-centred tetragonal indium

The phonon dispersion curves, phonon frequency distribution function as well as the lattice specific heat of body-centred tetragonal indium have been deduced using a lattice dynamical model which includes central, angular and volume forces. Six elastic constants, four zone boundary frequencies and an equilibrium condition were used in the evaluation of the force constants. It is shown that this model is elastically consistent and satisfies the symmetry requirements of the lattice, the phonon frequencies of indium deduced from it are in very good agreement with the experimental values of Reichardt and Smith and the theoretical values of Garrett and Swihart, and theθ _D values compare well with the experimental values over a wide temperature range. The apparent discrepancies in the phonon dispersion curves and theθ _D-T curves obtained from deficient models, importance of umklapp processes and the significance of angular forces in the lattice dynamical models are discussed.     

Stabilization of a high energy molecular conformation by specific intermolecular forces, a novel planar benzylideneaniline system

The system containing six benzylideneanilines (BA) has been studied: Group 1:

Surface forces in wetting films

A short review of various components of surface forces acting in a non-symmetrical system such as wetting films is presented here. Experimental results are compared with modified DLVO theory, which includes, besides dispersion and electrostatic, structural (solvation) forces caused by a change in liquid structure in conditions of confined geometry. The peculiarities of disjoining pressure isotherms and conditions of the film stability of non-polar and polar simple liquids, as well as of aqueous solutions of electrolytes and surfactants, are systematically considered from a historical perspective.     

Effect of Insoluble Surfactants on Drainage and Rupture of a Film between Drops Interacting under a Constant Force

The deformation, drainage, and rupture of an axisymmetrical film between colliding drops in the presence of insoluble surfactants under the influence of van der Waals forces is studied numerically at small capillary and Reynolds numbers and small surfactant concentrations. Constant-force collisions of Newtonian drops in another Newtonian fluid are considered. The mathematical model is based on the lubrication equations in the gap between drops and the creeping flow approximation of Navier–Stokes equations in the drops, coupled with velocity and stress boundary conditions at the interfaces. A nonuniform surfactant concentration on the interfaces, governed by a convection–diffusion equation, leads to a gradient of the interfacial tension which in turn leads to additional tangential stress on the interfaces (Marangoni effects). The mathematical problem is solved by a finite-difference method on a nonuniform mesh at the interfaces and a boundary-integral method in the drops. The whole range of the dispersed to continuous-phase viscosity ratios is investigated for a range of values of the dimensionless surfactant concentration, Peclét number, and dimensionless Hamaker constant (covering both “nose” and “rim” rupture). In the limit of the large Peclét number and the small dimensionless Hamaker constant (characteristic of drops in the millimeter size range) a fair approximation to the results is provided by a simple expression for the critical surfactant concentration, drainage being virtually uninfluenced by the surfactant for concentrations below the critical surfactant concentration and corresponding to that for immobile interfaces for concentrations above it.     

贫困大学生就业对策研究

随着高等教育快速发展,高校毕业生就业形势越来越严峻。本文从家庭经济贫困对大学生的专业学习、能力培养、就业信息获取、就业观念等造成负面效应入手,探讨就业对策,从而帮助贫困生实现充分就业。     

磁浮轴承转子系统的稳定性研究

针对非线性磁浮轴承转子系统的具体特点，用数值积分和庞加莱映射方法对刚性磁浮轴承转子系统进行稳定性研究，得到了系统在某些参数域中的时域波形、频谱图、相图、轴心轨迹以及庞加莱映射图，并给出了系统产生混沌运动诱发失稳的参数域。为更好控制磁浮轴承转子系统运行状态提供理论参考。     

力素比对预应力混凝土复合受力构件强度及破坏形态的影响

构件的受力特征及承载力大小与许多因素有关,当构件其他内在因素不变时,力素比对构件的强度及破坏形态有很大影响。以预应力混凝土构件在弯、剪、扭复合受力下的板-桁模型理论为基础,按照力的平衡、力矩平衡、变形协调及材料本构关系等建立了相应的计算方程及全过程分析程序。利用此方法分析了在小扭弯比情况下,不同力素比对复合受力构件强度及破坏形态的影响,经试验值和理论值对比符合情况较好。