响应面法酶解剩余活性污泥中微生物蛋白质研究

从剩余活性污泥中提取及分解蛋白质是有效减少污泥二次污染的重要途径．以剩余活性污泥为原料,采用酶解法分解蛋白质,分析了体系ｐＨ值、酶解时间、酶解温度、酶用量、液固比对蛋白质分解率的影响,并应用响应面分析法优化蛋白质分解条件．结果表明:以蛋白质分解率为响应值,经实验后最终确定最优条件为:pH为7.0,液固比4.0:1.0,酶解时间为4.0h,酶解温度为58.0℃,酶用量（E:S）为3.0%,分解率达53.29%,接近响应面模型所预测的分解率．     

Certified reference materials for organic contaminants in sewage sludge: a feasibility study

As an answer to the re-evaluation of the European sludge directive, two novel reference materials for organic components in municipal sludge have been produced and test certified for AOX (absorbable organic halogens), PAH (polycyclic aromatic hydrocarbons), NPE (nonylphenol and nonylphenolethoxylates), DEHP (di(2-ethylhexyl)phthalate), bisphenol A, and BFR (brominated flame retardants). The materials were prepared from raw sludge without spiking or mixing of different sludges. The study demonstrated that the technique for the preparation of a suitable reference material, sufficiently homogenous and stable, and with concentration levels that answer the needs of the laboratories and the relevant authorities, can now be presented in detail. The results, furthermore, show there is a need for method validation and standardisation of the measurements of NPEs and certain BFR congeners, and that the development of the laboratory structure in Europe, with fewer and more specialised laboratories, might become a major obstacle when trying to find a sufficient number of laboratories being appropriately proficient for this kind of study in the future.     

不锈钢酸洗污泥-黏土基陶粒的制备及性能研究

利用热力学软件FactSage中Equilib模块计算不锈钢酸洗污泥掺量的增加对制备陶粒结晶相的影响,得到合适的污泥烧制陶粒的掺量配比,即m(污泥)∶m(黏土)=20∶80;通过陶粒烧制试验,对该配比烧制的陶粒颗粒进行密度与抗压性能测试,得1100℃时烧制陶粒颗粒膨胀性较好,颗粒内部孔洞较为均匀,抗压强度平均为810N;陶粒对重金属Cr、Ni浸出结果显示,浸出液中Cr、Ni元素远小于国标中的限定量,表明陶粒对这两种元素的固化效果较好。     

Synthesis of Hydrophobic Cationic Chitosan Flocculant and Its Sludge Dewatering Property

The hydrophobic cationic chitosan (HTCC) flocculant was synthesized by reacting chitosan with epoxy propyl trimethyl ammonium chloride (EPTAC) and (2,3-epoxy propyl) dodecyl dimethyl ammonium chloride (EDC), to improve its waste sludge dewaterability. By FTIR and ¹H NMR analysis, EPTAC and EDC were confirmed to be grafted onto the molecular chains of chitosan (CTS) successfully. With the increase of EDC content, G′ of HTCC aqueous solution with 1:1.5:1.5 mole ratio of CTS:EPTAC:EDC consistently showed higher values than G″ over the entire frequency range explored, indicating the formation of a physically cross-linked network. The crystallization ability of HTCC decreased compared with pristine CTS. The long alkyl chains on the EDC molecules enhanced the hydrophobicity of HTCC, and better dewaterability of the waste sludge was achieved through the promoted bridging action of HTCC.     

Innovative combination of QuEChERS extraction with on-line solid-phase extract purification and pre-concentration,followed by liquid chromatography-tandem mass spectrometry for the determination of non-steroidal anti-inflammatory drugs and their metabolites in sewage sludge

For the first time QuEChERS extraction of sewage sludge was combined with the automatic solid-phase pre-concentration and purification of the extract (following indicated as SPE) and LC-MS/MS analysis, for the determination of the non-steroidal anti-inflammatory drugs acetylsalicylic acid (ASA), diclofenac (DIC), fenbufen (FEN), flurbiprofen (FLU), ketoprofen (KET), ibuprofen (IBU) and naproxen (NAP), and their metabolites salicylic acid (SAL), 4′-hydroxydiclofenac (4′-HYDIC), 1-hydroxyibuprofen (1-HYIBU), 2-hydroxyibuprofen (2-HYIBU), 3-hydroxyibuprofen (3-HYIBU) and o-desmethylnaproxen (O-DMNAP). Various commercial pellicular stationary phases (i.e. silica gel functionalized with octadecyl, biphenyl, phenylhexyl and pentafluorophenyl groups) were preliminarily investigated for the resolution of target analytes and different sorbent phases (i.e. octyl or octadecyl functionalized silica gel and a polymeric phase functionalized with N-benzylpyrrolidone groups) were tested for the SPE phase. The optimized method involves the QuEChERS extraction of 1 g of freeze-dried sludge with 15 mL of water/acetonitrile 1/2 (v/v), the SPE of the extract with the N-benzylpyrrolidone polymeric phase and the water/acetonitrile gradient elution on the pentafluorophenyl stationary phase at room temperature. Matrix effect was always suppressive and in most cases low, being it ≤20% for ASA, DIC, FLU, KET, IBU, 1-HYIBU, 2-HYIBU, 3-HYIBU, NAP and O-DMNAP, and included in the range of 35–47% for the other analytes. Recoveries were evaluated at three spiking levels, evidencing almost quantitative values for HYIBUs and O-DMNAP; for ASA, SAL and KET the recoveries were included in between 50 and 76%, whereas for the other compounds they ranged from 36% to 55%. The proposed method showed better analytical performances than those so far published, being suitable for target compound determination in real samples from tens of pg g⁻¹ to ng g⁻¹ of freeze-dried sludge, with a total analysis time of 30 min per sample.     

Comparative genomics for understanding the structure,function and sub-cellular localization of hypothetical proteins in Thermanerovibrio acidaminovorans DSM 6589 (tai)

The Thermanerovibrio acidaminovorans DSM 6589 (tai) is a unique bacterium isolated from anaerobic sludge bed reactor from sugar refinery in Netherland. The comparative genomic studies for understanding the hypothetical proteins in T. acidaminovorans DSM 6589 (tai) were carried out using different bioinformatic tools and web servers. In all 320 hypothetical proteins were screened from the total available genome. The Insilico function prediction for 320 hypothetical proteins was achieved by using different online servers like CDD-Blast, Interproscan and pfam whereas, the structure prediction for 202 hypothetical proteins were deciphered by using protein structure prediction server (PS2 server). The sub-cellular localization for the identified proteins was predicted by the use of cello v2.5 for 320. The study carried out has helped us to understand the structures and functions of unknown proteins available in T. acidaminovorans DSM 6589 (tai) through comparative genomic approach.     

Pharmaceuticals and Their Main Metabolites in Treated Sewage Sludge and Sludge-Amended Soil: Availability and Sorption Behaviour

This work evaluated the availability and sorption behaviour of four pharmaceuticals and eight of their metabolites in sewage sludge and sludge-amended soil. Digested sludge and compost were evaluated. The highest levels found in digested sludge corresponded to caffeine (up to 115 ng g⁻¹ dm), ibuprofen (45 ng g⁻¹ dm) and carbamazepine (9.3 ng g⁻¹ dm). The concentrations measured in compost were even lower than in digested sludge. No compound was detected in sludge-amended soils. This fact could be due to the dilution effect after sludge application to soil. Different adsorption capacities in sludge–soil mixtures were measured for the studied compounds at the same spike concentration. In general, except for paraxanthine and 3-hydroxycarbamazepine, the metabolite concentrations measured in the mixtures were almost two-fold lower than those of their parent compounds, which can be explained by their mobility and lixiviation tendency. The log K_d ranged from −1.55 to 1.71 in sludge samples and from −0.29 to 1.18 in soil–sludge mixtures. The log K_d values calculated for compost were higher than those calculated for digested sludge. The obtained results implied that the higher organic carbon content of compost could influence soil contamination when it is applied to soil.     

造纸污泥在回转窑中热解的试验研究

本文在自行设计的小型外热式回转窑试验装置上进行了污泥热解试验,考察了污泥在不同热解连温下三种形态热解产物的产率,分析了污泥在热解过程中热解气体的成分和热值的变化特性以及热解半焦的品质。采用表观动力学模型对热解气体的试验数据进行计算,结果表明用该模型描述热解气体的析出是合理的。     

铁法矿务局煤泥水过滤性能的研究

通过实验得出,铁法矿务局煤泥水不经加药处理,污泥比阻ｒ＝３１６×１０１１ｃｍ／ｇ,该值太大,属于极难过滤污泥·经过加药处理后,ｒ＝００５７×１０１１ｃｍ／ｇ,该值变小,可以采用机械脱水设备进行脱水·     

微波消解-ICP-MS测定电镀污泥中的重金属

采用微波消解系统对某电镀污泥进行消解,利用ICP-MS对污泥中的重金属进行测定。称取制备后样品,置于消解罐中充分反应后,赶酸、定容后利用电感耦合等离子体质谱法进行测定。电镀污泥中的铬为18845.2mg/kg、镉为10.3mg/kg、镍为5200.0mg/kg、铅为189.7mg/kg、铜为3271.7mg/kg、锌为49632.6mg/kg。测定结果表明所检测项目工作曲线线性关系好,相关系数r均大于0.999。铬加标回收率在91.6～97.7%之间、镉加标回收率在92.0～97.0%之间、镍加标回收率在95.1～98.0%之间、铅加标回收率在94.3～95.2%之间、铜加标回收率在97.1～102%之间、锌加标回收率在96.3～98.7%之间,均满足相关测定要求。计算的潜在生态危害系数、潜在生态危害指数结果表明,电镀污泥中的铬、镉、铅、铜、锌为轻微生态危害,镍为强生态危害;潜在生态危害指数RI计算值为216.69,属于中等生态危害。