Vibro-acoustic behaviour of laminated double glazing enclosing a viscothermal fluid cavity

This paper presents a new numerical model to investigate the vibro-acoustic behaviour of two laminated glass plates enclosing a thin viscothermal fluid cavity. The aim of this work is to develop an original five layer (two skins plies, two adhesive films and a core ply) laminated plate finite element by mixing Kirchhoff and Mindlin plate’s theory. The formulation is based on the theory that accounts for the transverse shear in the adhesive films and in the core. The acousto-elastic model is established in dimensionless appropriate form including the effects of viscosity and thermal conductivity of fluid and by taking into account the fluid-structure interaction. The discretization of the energy functional by finite element method gives after minimisation a symmetrical coupled matrix system in which the acoustic matrices are frequency dependent. Therefore, an iterative procedure is derived to determine the eigenmodes of the coupled system. The modal approach is adopted to determine the vibro-acoustic system’s response. Then, the validation of the new laminate finite element model is achieved by comparing the sandwich plate results against data obtained from literature. Subsequently, predicted responses, such as the vibration transmissibility and the transmission loss of the coupled system, for a given laminated double glazing under an imposed homogeneous pressure are presented and discussed. Numerical results show the importance of both lamination and viscothermal fluid effects on double glazing vibro-acoustic behaviour.     

翡翠贻贝珍珠层的XRD和FTIR光谱特征

对翡翠贻贝贝壳的珍珠层、棱柱层进行了XRD和FTIR光谱检测,对文石的ν₁,ν₂及ν₄三个内振动模式的频率进行了分析。文石的ν₁和ν₄带在所有的样品中不存在频率位移现象,与洞穴文石的相关谱带的频率一致;ν₂带频率却存在较大差异,珍珠层、棱柱层的ν₂带存在频率位移,初步推测生物合成文石与热效应有关,内部储存有过剩的能量,可作为研究生物矿化机理的实验依据。     

基于层层自组装碳纳米管的应变检测仪

通过对微小应变检测意义的分析,提出了本检测仪在实际应用方面的价值和前景。基于对碳纳米管导电机理的分析、制备薄膜电阻,利用其电阻随形变变化较为灵敏的特性,将电阻的变化转换为电压值的变化,经过数据采集、放大和数字处理设计了应变传感器。     

石英衬底上Au缓冲层对ZnO薄膜微结构的影响

采用单源化学气相沉积(SSCVD)法,在石英衬底上以Au为缓冲层,Zn4(OH)2(O2CCH3)6.2H2O为固相源制备ZnO薄膜。SEM和XRD测试ZnO薄膜的微结构,结果表明:相对于SiO2衬底上生长的ZnO薄膜,Au/SiO2衬底上生长的ZnO薄膜具有较好的结晶质量和表面平整度;对制备ZnO薄膜的衬底温度进行了工艺优化,结果表明:500℃时制备的ZnO薄膜颗粒大小均匀,结晶质量较好;通过荧光光谱仪对Au/SiO2衬底上的ZnO薄膜进行光致发光(PL)谱测试,ZnO薄膜在400nm出现紫光发射峰,而没有出现与缺陷相关的深能级发射峰,表明ZnO薄膜具有较好的结晶质量。     

不同盖层对InAs/GaAs量子点结构和光学性质的影响

利用金属有机化合物气相沉积设备生长了不同盖层结构的InAs/GaAs量子点,采用原子力显微镜和光致发光光谱仪对量子点的结构和光学性质进行了研究.量子点层之间的盖层由一个低温层和一个高温层组成.对不同材料结构的低温盖层的对比研究表明,In组分渐变的InGaAs低温盖层有利于改善量子点均匀性、减少结合岛数目、提高光致发光强度;当组分渐变InGaAs低温盖层厚度由6.8 nm增加到12 nm,发光波长从1256.0 nm红移到1314.4 nm.另外,还对不同材料结构的高温盖层进行了对比分析,发现高温盖层采用In组分渐变的InGaAs材料有利于光致发光谱强度的提高. 关键词： 半导体量子点 盖层 组分渐变     

Insertion loss of sound waves through composite acoustic window materials

This study evaluated the insertion loss of sound waves through composite acoustic window materials for sonar dome applications, and examined the influence of dome shape on the sonar performance. The insertion loss of sound waves through acoustic window materials was experimentally measured as a function of frequency at normal incidence. The insertion loss was also theoretically estimated with three- and four-medium layer models. The theoretical estimation of insertion loss showed good agreement with the experimental measurements. The insertion loss was also measured as a function of angle of incidence. The characteristics of longitudinal and converted shear waves were observed at various angles of incidence. This study will be useful to select acoustic window materials with the appropriate acoustic characteristics for practical sonar dome applications.     

Evolution of the ring-like vortices and spike structure in transitional boundary layers

At the late stage of transitional boundary layers, the nonlinear evolution of the ring-like vortices and spike structures and their effects on the surrounding flow were studied by means of direct numerical simulation with high order accuracy. A spatial transition of the flat-plate boundary layers in the compressible flow was conducted. Detailed numerical results with high resolution clearly represented the typical vortex structures, such as ring-like vortices and so on, and induced ejection and sweep events...     

膜系光谱系数对膜层参数的一阶和二阶偏导数的计算模型

为了寻找一种膜系深入分析与设计的有力辅助计算工具,从光学薄膜光谱系数的矩阵计算理论出发,基于对矩阵求迹运算的巧妙运用,从数学上建立了准确计算膜系光谱系数关于膜层几何厚度、实际折射率和消光系数等膜层参数的一阶和二阶偏导数的解析模型。这一偏导数计算模型物理上与矩阵理论具有一致的通用性和普适性,适用于任何各向同性的均匀膜系统。在数学上也严格成立,数值编程计算不存在差分近似,精度达到了计算机浮点运算的极限精度。而且算法运算费时少,计算速度快,取得了高度准确性和便于实时化的双重优越性能,非常有利于应用于膜系设计领域来提高膜层数较大时的设计速度和效率。同时,这一模型能非常便捷和准确地给出膜系许多实用的导数信息,对膜系分析、测量和膜厚监控等领域中的相关应用具有重要的参考意义。     

Patterning on single crystalline silicon by laser scanning and alkaline etching

The applicability of laser processing for small-lot micro-electromechanical system devices is discussed in this paper. This simple process could replace conventional complex processes designed with mass production in mind. Ablation, protrusions or surface modification is revealed to occur by argon ion laser scanning into silicon. Which of them occurs depends on the laser power. It is found that the protrusions are covered by a thin layer of oxide; however, oxidation of the modified surface is not established even though some results suggest it. Surface modification is more applicable to surface patterning than coarse protrusion is because the laser-modified surface can be used as a mask in KOH etching to make sharp patterns. The applicability of this method is indicated by demonstrating pattern width control, patterning over a large area and the fabrication of a 16-bit linear scale.     

Computational study of plasma-surface interaction in plasma-assisted technologies

The influence of the unevenness of substrates immersed into plasma important for plasma-based treatment of materials were studied by computer experiment. The role of both substrate properties and plasma parameters was investigated. For this analysis the combination of multidimensional fluid modelling and particle simulation was used. The fluid part of our model consisted of continuity equations for all charged species, energy balance equation for electrons and Poisson equation. The basic scattering processes were also included. The particle simulation technique was used both for the calculation of electron energy distribution function and for the derivation of quantities characterising plasma-surface interaction. This approach enabled us to study in detail the structure of the sheath and presheath near metal substrates with realistic geometries and finite dimensions. The main attention was devoted to the influence of substrate geometry in both macroscopic and microscopic spatial scales on the local electric fields in plasma.