Experience Gained Using Second-Moment Closure Modeling for Transitional Flows Due to Boundary Layer Separation

This paper presents detailed information on the experience gained during the attempts to model a set of transitional flows due to boundary layer separation. These flows are developed on a flat plate with a semi-circular leading edge and they have been coded by the ERCOFTAC Special Interest Group on Transition, as T3L flows. Different freestream velocities and turbulence intensities configure these transitional flows and, by consequence, govern the transition mechanism, resulting in larger or smaller transitional regions. The modeling of the T3L flows has been performed by adopting a low-Reynolds number second-moment closure turbulence model. The results showed satisfactory agreement with the experimental measurements, although some difficulties regarding successful convergence have been faced. The final conclusion is that turbulence modeling can present quite accurate results for transitional flows without any additional use of ad-hoc modifications or additional equations based on various transition models and intermittency transport modeling.     

GDX—硅胶混合薄层色谱板的效率和定量性能

对用ＧＤＸ－１０２－硅胶Ｇ、有机粘合剂研制出的混合薄层板进行性能测试，评价了其在硝基苯胺异构体、酸性食品染料分离测试方面的应用，得到好的结果。     

激光开槽、埋槽电极硅太阳电池

报道一种新颖的激光开槽、埋槽电极硅太阳电池的结构、工艺流程及其研制结果。在ＡＭ１．５，２５℃，１００ｍＷ／ｃｍ２的条件下，以面积为４５ｃｍ３的３６片硅片研制的硅太阳电池的输出参数的平均值为ＪＳＣ＝３６．１ｍＡ／ｃｍ２，Ｖ∞＝６３３ｍＶ，Ｆ．Ｆ．＝０．７９８，η＝１８．２３％，最后分析了种高性能硅太阳电池的设计特点。     

四阶段三层次洗毛机理的研究

根据国产原毛表面各种污染物的特点、分布状态及其去除过程，提出了原毛表面污染物去除过程的四个阶段：润湿阶段、溶胀阶段、快速去污阶段和慢速去污阶段；原毛表面污染物可分为附着层、混凝层和结合层。各层污染物在纤维表面附着状态不同、结合形式不同，因而各污染物洗涤难易程度和去除机理各不相同．结合层污染物较难去除，洗涤时针对结合层污染物特点需采用特殊工艺。     

玻璃钢地下输水管的生产工艺

阐述了生产玻璃钢地下输水管道的工艺流程及管壁各层的设计内容及其作用,分析了各工艺中的工艺要点,并给出了生产工艺数据。     

Temperature factor effect on the structure of the separated flow within a supersonic gas stream

The effect of the temperature factor, that is, the ratio of the body temperature to the freestream stagnation temperature, on the structure of the separated flow formed in the presence of a concave corner in a supersonic stream is studied. The strong influence of the temperature factor on the separation zone length and the flow-generated aerodynamic characteristics is established. It is shown that for fairly large deflection angles this flow cannot be described by free interaction, or triple deck, theory.     

世界经济层内进化浅论

本文将物理系统层内进化扩展到世界经济系统中去，通过对世界经济循环结构与物理系统进化的层次结构关系的探讨，论述了世界经济周期的特征及经济周期的熨平作用。     

Asymptotic analysis and estimates of blow‐up time for the radial symmetric semilinear heat equation in the open‐spectrum case

We estimate the blow‐up time for the reaction diffusion equation u_t=Δu+ λf(u), for the radial symmetric case, where f is a positive, increasing and convex function growing fast enough at infinity. Here λ>λ^*, where λ^* is the ‘extremal’ (critical) value for λ, such that there exists an ‘extremal’ weak but not a classical steady‐state solution at λ=λ^* with ∥w(?, λ)∥_∞→∞ as 0<λ→λ^*?. Estimates of the blow‐up time are obtained by using comparison methods. Also an asymptotic analysis is applied when f(s)=e^s, for λ?λ^*?1, regarding the form of the solution during blow‐up and an asymptotic estimate of blow‐up time is obtained. Finally, some numerical results are also presented. Copyright © 2007 John Wiley & Sons, Ltd.     

Number albedo measurements from stratified layers of iron,concrete and aluminium

A layer of stratified combination composed of selected radiation shielding materials acquires better shielding property. Albedo is used in such measurements as an integral measure ofγ-ray scattering. The stratified slabs of alternating heterogeneous layers have been found to have a virtual homogeneous property with a definite effective atomic number. The angular distribution of back-scattered photons as well as the total number albedo values for iron, aluminium and concrete in stratified combination for 662 keV and 1250 keV photons are reported.     

一个临界情形的奇摄动拟线性二阶方程组的狄利克雷问题

研究了临界情形的拟线性二阶方程组的狄利克雷问题，证明了狄利克雷问题解的存在唯一性，并给出解的渐近展开式及余项，估计式．