Indirect Methods For Determination of The Protective Effects of Coating Films on The Surface of Crystals

The extents of the protective effects of coating films on the surface of crystals were determined. Three different samples were made with different quantities of coating fluid (Sepifilm LP 010 in 10% aqueous solution). Since the atomizing rate was constant, the coating time increased in parallel with the volume of coating fluid applied. The direct measurement of film thickness and smoothness is very difficult, and therefore indirect methods were used. Dimenhydrinate was chosen as model drug; this is a heat-sensitive antihistamine with a low melting point. This temperature can be reached during the tableting process. The behaviour of samples on exposure to heat was examined by differential scanning calorimetry. The water uptakes of the samples were determined with an Enslin apparatus. Plasticity was studied with an instrumented tablet machine. These indirect methods (thermal conductivity, water uptake and plasticity measurements) revealed connections between the results of the various experiments. An overlong coating time decreased the protective effect of the coating film. This revised version was published online in August 2006 with corrections to the Cover Date.     

信用担保风险的模糊综合评审研究

信用担保机构是连接银行和企业的桥梁，对于改善企业融资环境和拓展银行业务具有重要意义，信用担保风险的评审是担保机构能否生存及有效运行的关键。信用风险的评审机制主观性强，对担保项目进行客观，公正的评审比较困难。本采用模糊数学中的综合判别方法，全面考虑风险评审所涵盖的各种风险指标及其重要度，建立了定性分析与定量分析方法相结合的信用担保风险综合评审模型，为担保机构提供了一种相对科学、客观的评审方法。     

对高师体育教育专业学生培养的思考

指出了在高师体育专业学生培养过程中存在的问题,提出了以知识为基础,知识、能力、素质三者和谐统一的理想人才模式,为达到这个目标,提出的对策有:深化课程体系改革;完善对学生的管理;加强教师队伍建设;进行思想品德、人文素质教育;注重实践,促进学生能力发展.     

Correlation between the Mechanical Properties and the Amount of Desorbed Water for Composites Based on Low-Density Polyethylene and Linen Yarn Production Waste

The effect of the amount of desorbed water on the mechanical properties of composites based on low-density polyethylene and linen yarn production waste (LW) is analyzed by statistical methods. It is shown that the amount of absorbed water decreases during the desorption process at room temperature both for specimens modified and unmodified with diphenylmethane diisocyanate (DIC.) The most sensitive to the action of water is the elastic modulus, which decreases considerably under the effect of water and is fully restored in the desorption process. The tensile strain also increases with the amount of absorbed water. It is found that the elastic modulus of the unmodified composite correlates linearly with the amount of desorbed water. Between the amount of desorbed water and the tensile strain, as well the specific work of deformation, a negative linear correlation is revealed. After water desorption, all strength and deformation characteristics of both the modified and unmodified composites are fully recovered.__________Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 4, pp. 515–524, July–August, 2005.     

中水回用前景及其实际意义

概述了中水及中水回用的概念,分析了目前中水回用中存在的问题,探讨了水源热泵技术的应用。     

强化服务,注重创新,全面推进高校信息工作

面对党中央提出的以科学发展观为统领,努力办好让人民群众满意的教育,促进社会主义和谐社会建设的新形势、新任务,高校信息工作者如何进一步做好信息报送工作、提高信息报送的质量,笔者试从思想意识、队伍建设、服务内容、服务手段等方面提出进一步做好此项工作的建议。     

建开放实验室 促创新型人才培养

开放实验室是教育改革的新举措，也是培养创新人才，提高综合素质的必由之路。该文根据西北农林科技大学农学院教学实验中心两年多的开放实践，阐明了开放实验的作用、开放运行模式和保障制度，介绍了开放实验室之后取得的成效，并特别强调了无偿开放办法的益处。另外，从管理方式，经费来源，激励制度，安全隐患等方面，提出了改进措施，供大家借鉴。     

电子束流品质对自由电子激光小信号增益影响的计算

对电子束有一定初始能量分散或角度分散时的自由电子激光小信号增益用较简便的方法进行了分析计算,并给出了一个渐近公式,结果与用计算机模拟解自由电子激光微分方程组得到的结果一致。     

双面加热环形通道内干涸点的确定

根据环形管通道内流体流动和换热的特点,以Kirillov和Smogalev提出的干涸点理论模型假设为基础,从最基本的质量守恒方程出发,并引入临界液膜厚度等相应的辅助模型,得到了双面加热环形通道内流动沸腾干涸点的理论模型。同时针对间隙为1.0mm和1.5mm的环形窄缝进行了低压低质量流速工况下干涸点的实验研究。比较发现理论模型预测值与实验结果基本相符。说明本文提出的理论模型适用于低压低流量条件下的窄环形通道。实验同时发现:环状流临界热流密度在系统压力为2.2MPa达到最大值,临界含汽量随质量流速的增大呈缓慢下降趋势。     

Mathematical Modeling, Control, Computer Simulation and Laboratory Experiments of a Spatial Servopneumatic Parallel Robot

In this paper, the special construction of a parallel robot, called spatial servopneumatic multi-axis test facility, will be discussed. The investigations include the following aspects: (i) the laboratory set-up of the robot, (ii) various results obtained in laboratory experiments, taking into account quite different control algorithms and command-input signals, (iii) a comparison of the laboratory experiments with the computer simulations of Part I of this paper, and ({vi}) a quality check of the results compared with the cost of the different controller realizations. The results of both the computer simulations and the laboratory experiments show: (i) The dynamic behavior of the parallel structure can be tremendously improved by using sophisticated nonlinear control algorithms. (ii) This improvement has to be paid by a drastically increased amount of work for deriving the model equations and control algorithms, and by augmented hardware cost of the sensing elements and controller electronics. (iii) Carefully developed model equations and identified model parameters provide theoretical models of the complex parallel structure that are very close to reality. This enables the design engineer to systematically investigate constructive alternatives of the design parameters, sensor and actuator concepts, and control strategies of the MAP prior to their hardware realization.This work has been supported by the German Science Foundation (DFG) under Contract No. Ha 1666/6-3.