Simple Device for Isolation of Organic Compounds from Water

Abstract

A simple device for isolation of organic compounds from aqueous samples has been designed and its operating parameters tested during bioth periodic and continuous operation using isolation of organochlorine compounds as an example.

A stream of an aqueous sample is pumped at elevated temperature by a piston pump to an unit for expransion of the liquid phase surface, where the liquid is sprayed on the walls of the unit and flows down freely.

Organochlorine compounds passing to the gaseous phase are purged with a stream of purified air, oxidied and the chlorides formed are determined coulometrically. The designed device, due to its simplicity, can be built and employed in each averagely equipped laboratory.     

Chromatography of Uranium on High-Performance Ion Exchangers

Abstract

The potential of high-performance liquid chromatography (HPLC) for the determination of U(VI) in ground waters and urine has been examined under a variety of HPLC experimental conditions. Conventional cross-linked and bonded-phase ion exchangers, both cation and anion, were studied with aqueous mobile phases containing tartrate, citrate, or α-hydroxyisobutyrate. The best chromatography was obtained on bonded-phase cation exchangers with an α-hydroxyisobutyrate eluent. The metal ions were detected either by visible spectrophotometry after a post-column reaction with a complexing reagent, or with a polarographic detector. Dectection after post-column reaction gave the best sensitivity; the detection limit (2 × baseline noise was 6 ng or 60 ng.ml^?1 for 100 μl samples. In-line trace enrichment was used to decrease detection limits and linear calibration curves were observed in the ranges studied; 0.5 to 50 ng.mL^?1 for ground waters and 25 to 400 ng.mL^?1 for artificial urine.     

Determination of organochlorine pesticides in river water using dispersive liquid–liquid microextraction and gas chromatography–electron capture detection

Dispersive liquid–liquid microextraction (DLLME) coupled with gas chromatography–electron capture detection (GC–ECD), has been developed for the extraction and determination of 14 organochlorine pesticides (hexachlorocyclohexanes (α-HCH, β-HCH and δ-HCH), Lindane (γ-HCH), Aldrin, Dieldrin, Endrin, Heptachlor, Heptachlor epoxide, α-Chlordane, β-Chlordane and p,p′-DDT, p,p′-DDD, p,p′-DDE) in river water samples. Factors relevant to the microextraction efficiency, such as the kind of extraction and disperser solvent, their volume and the salt effect was investigated and optimised. In this method the appropriate mixture of extraction solvent (13.5 µL carbon disulphide) and disperser solvent (0.50 mL acetone) were rapidly injected into the aqueous sample by syringe. The values of the detection limit of the method were in the range of 0.05–0.001 µg L^?1, while the relative standard deviations for five replicates varied from 2.7 to 9.3%. A good linearity (0.9894 ≤ r ² ≤ 0.9998) and a broad linear range (0.01–200 µg L^?1) were obtained. The method exhibited enrichment factors ranging from 647 to 923, at room temperature. The relative standard deviations varied from 2.7 to 9.3% (n = 5). The relative recoveries of each pesticide from water samples at spiking levels of 2.00 and 10.0 µg L^?1 were 88.0–111.0% and 95.8–104.1%, respectively. Finally, the proposed method was successfully utilised for the preconcentration and determination of the organochlorine pesticides in the Jajrood River water samples.     

QuEChERS and solid phase extraction methods for the determination of energy crop pesticides in soil,plant and runoff water matrices

QuEChERS and solid phase extraction (SPE) methods were applied for determining four herbicides (metazachlor, oxyfluorfen, quizalofop-p-ethyl, quinmerac) and one insecticide (α(±)-cypermethrin) in runoff water, soil, sunflower and oilseed rape plant matrices. Determination was performed using gas chromatography mass spectrometry (GC-MS), whereas high-pressure liquid chromatography mass spectrometry (HPLC-MS) was used for quinmerac. In all substrates linearity was evaluated using matrix-matched calibration samples at five concentration levels (50–1000 ng L^?1 for water, 5–500 μg kg^?1 for soil and 2.5–500 μg kg^?1 for sunflower or oilseed rape plant). Correlation coefficient was higher than 0.992 for all pesticides in all substrates. Acceptable mean recovery values were obtained for all pesticides in water (65.4–108.8%), soil (70.0–110.0%) and plant (66.1–118.6%), with intra- and inter-day RSD% below 20%. LODs were in the range of 0.250–26.6 ng L^?1 for water, 0.10–1.8 μg kg^?1 for soil and 0.15–2.0 μg kg^?1 for plants. The methods can be efficiently applied for field dissipation studies of the pesticides in energy crop cultivations.     

Magnetic solid-phase extraction of Zineb by C18-functionalised paramagnetic nanoparticles and determination by first-derivative spectrophotometry

Fe₃O₄-SiO₂-C₁₈ paramagnetic nanoparticles have been synthesised and used as magnetic solid-phase extraction (MSPE) sorbent for the extraction of Zineb from agricultural aqueous samples under ultrasonic condition and quantified through a first-derivative spectrophotometric method. The produced magnetic nanoparticles were characterised by using scanning electron microscopy, X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy and zeta potential reader. The Fe₃O₄-SiO₂-C₁₈ paramagnetic nanoparticles had spherical structures with diameters in the range of 198–201 nm. Further, MSPE was performed by dispersion of Fe₃O₄-SiO₂-C₁₈ paramagnetic nanoparticles in a buffered aqueous solution accompanied by sonication. Next, the sorbents were accumulated by applying an external magnetic field and were washed with 4-(2-pyridylazo) resorcinol-dimethyl sulfoxide solution, for the purpose of desorbing the analyte. The extraction conditions (sample pH, washing and elution solutions, amount of sorbents, time of extraction, sample volume and effect of diverse ions), as well as Zineb-PAR first-order derivative spectra, were also evaluated. The calibration curve of the method was linear in the concentration range of 0.055–24.3 mg L^?1 with a correlation coefficient of 0.991. The limit of detection and limit of quantification values were 0.022 and 0.055 mg L^?1, respectively. The precision of the method for 0.27 mg L^?1 solution of the analyte was found to be less than 3.2%. The recoveries of three different concentrations (0.27, 1.37 and 13.7 mg L^?1) obtained 98.3%, 98.5% and 96.0%, respectively. The proposed Fe₃O₄-SiO₂-C₁₈ paramagnetic nanoparticles were found to have the capability of reusing for 7.0 times.     

Determination of chlorophenols in environmental water samples using directly suspended droplet liquid-liquid-liquid phase microextraction prior to high-performance liquid chromatography

A new sample preparation method named directly suspended droplet liquid-liquid-liquid phase microextraction was used in this research for determination of three chlorophenols in environmental water samples. The analytes (2-chlorophenol, 3-chlorophenol and 4-chlorophenol) were extracted from 4.5?mL acidic donor phase, (pH 2, P1) into an organic phase, 350?µL?of benzene/1-octanol (90?:?10 v/v, P2) and then were back-extracted into a 7?µL droplet of an basic (pH 13) aqueous solution (acceptor phase, P3). In this method, contrary to the ordinary single drop liquid-phase microextraction technique, an aqueous large droplet is freely suspended on the surface of the organic solvent, without using a microsyringe as supporting device. This aqueous microdroplet is delivered at the top-centre position of an immiscible organic solvent which is laid over the aqueous donor sample solution while the solution is being agitated. Then, the acceptor phase containing chlorophenols was withdrawn back into a HPLC microsyringe and neutralised by adding of 7?µL HCl 0.1?M. The total amount was eventually injected into the HPLC system with UV detection at 225?nm for further analysis. Parameters such as the organic solvent, phases volumes, extraction and back-extraction times, stirring rate and pH values were optimised. The calibration graphs are linear in the range of 10–2000?µg?L^?1 with r?≥?0.9973. The enrichment factors were ranged from 115 to 170, and the limit of detection (LOD, n?=?7) varied from 5 to 10?µg?L^?1. The relative standard deviations (RSDs, n?=?5) were found 6.8 to 7.4 at S/N?=?3. All experiments were carried out at room temperature, (22?±?0.5°C).     

Determination of 61 organic pollutants in drinking water by solid phase extraction followed by liquid and gas chromatography coupled to tandem mass spectrometry: an analytical strategy for a routine laboratory

A method for determination of 61 organic pollutants (polycyclic aromatic hydrocarbons and organochlorine, organophosphorous and organonitrogen pesticides) is proposed. It is based on solid phase extraction (SPE) and subsequent analysis of the extract by liquid and gas chromatography coupled to tandem mass spectrometry. Method validation yielded to the following values: limits of quantification, from 0.005 to 0.020?µg?L^?1; trueness, 95% to 113% and reproducibility (as percent relative standard deviation), 2% to 15%. Additionally, the method performed well in various proficiency tests.     

Fast Reductive Amination by Transfer Hydrogenation “on Water”

Reductive amination of various ketones and aldehydes by transfer hydrogenation under aqueous conditions has been developed, by using cyclometallated iridium complexes as catalysts and formate as hydrogen source. The pH value of the solution is shown to be critical for a high catalytic chemoselectivity and activity, with the best pH value being 4.8. In comparison with that in organic solvents, the reductive amination in an aqueous phase is faster, and the molar ratio of the substrate to the catalyst (S/C) can be set as high as 1×10⁵, the highest S/C value ever reported in reductive amination reactions. The catalyst is easy to access and the reaction is operationally simple, allowing a wide range of ketones and aldehydes to react with various amines in high yields. The protocol provides a practical and environmental friendly new method for the synthesis of amine compounds.     

The Aqueous Ca2+ System,in Comparison with Zn2+, Fe3 +, and Al3 +: An Ab Initio Molecular Dynamics Study

Herein, we report on the structure and dynamics of the aqueous Ca²⁺ system studied by using ab initio molecular dynamics (AIMD) simulations. Our detailed study revealed the formation of well‐formed hydration shells with characteristics that were significantly different to those of bulk water. To facilitate a robust comparison with state‐of‐the‐art X‐ray absorption fine structure (XAFS) data, we employ a 1st principles MD‐XAFS procedure and directly compare simulated and experimental XAFS spectra. A comparison of the data for the aqueous Ca²⁺ system with those of the recently reported Zn²⁺, Fe³⁺, and Al³⁺ species showed that many of their structural characteristics correlated well with charge density on the cation. Some very important exceptions were found, which indicated a strong sensitivity of the solvent structure towards the cation′s valence electronic structure. Average dipole moments for the 2nd shell of all cations were suppressed relative to bulk water.