液膜法处理含氟废水

为了防止含氟废水的污染,人们研究了多种除氟方法,液膜技术是一项新的分离工艺,它操作简单,试剂用量少,有机相可重复利用。本文利用伯胺作迁移载体处理高含量的含氟废水,分离效率较好。 伯胺N_(1923)(简写RNH_2)为流动载体,上胺N_(205)(上海石油化工厂)为表面活性剂,煤油为溶剂。将内相CaCl_2,溶液与油相(含N_(1923)、N_(205)和煤油)按一定体积比例混合,高速搅拌,制成W/O     

换热器烟气侧传热特性的研究

通过计算和实验,对高温换热器的烟气侧传热特性进行了分析,得出换热器中换热管合理的纵横向间距,证明了用金属辐射网是强化高温烟气传热的有效方法,并用实验数据讨论了烟气流速及温度等对换热器综合传热系数的影响。     

利用果胶粕生产固体发酵饲料

用黑曲霉和酵母将果胶粕（生产果胶的废渣）进行固体发酵,确定了合适的氮源,水分、ｐＨ、时间等发酵条件,生产出蛋白含量较高的饲料。     

电解法处理不锈钢酸洗废液机理的研究

通过对常用于清洗不锈钢氧化皮的含有氢氟酸酸洗废液进行电解,探讨了在酸性废液中金属电沉积的条件及阳离子表面活性剂对析氢超电势的影响,初步找到了电解法处理酸洗废液再生利用的方法;这对解决国内外至今尚未解决的排放污染问题有较大的实用价值。     

Properties study of anhydrite(II) prepared from waste gypsums

Anhydrites(II)- CaSO₄ were prepared from two waste gypsums (PRECHEZA Perov, FOSFA Potorná). The samples of anhydrites(II) with sulphate activators were tested on spillage, beginning and the end of setting time, bending and pressure strength. Both sodium and potassium sulphates accelerated setting of anhydrite, more impressively that prepared from Potorná gypsum. The addition of Na₂SO₄ influenced the strength of this anhydrite very favourably. On the contrary K₂SO₄ influenced favourably the strength of Perov anhydrite. Results confirm the necessity to evaluate properties of such materials with respect to their origin.     

Coupling of thermal desorption in modified closeable sampling columns with wide-bore capillary gas chromatography and mass spectrometric detection

In contrast to usability of Curie-point pyrolysis at 700°C directly attached to gas chromatography-mass spectrometry (GC-MS) for determination of organic wood preservatives in waste wood samples the investigation method reported here consists of thermal desorption at temperatures about 260°C in connection with GC-MS for peak identification or GC with flame ionization detection for quantitative analyses. So-called “modified closeable sampling columns” are used as batch-reactor in thermal desorption experiments. Desorbed vapours can be introduced on capillary columns without sample discrimination and without a disturbing lost of resolution. In this manner a lot of individual polycyclic aromatic hydrocarbons were determinated in waste wood samples, especially in railway sleepers.     

Synthesis and characterization of hollandite-type material intended for the specific containment of radioactive cesium

The hollandite Ba₁Cs_0.28Fe_0.82Al_1.46Ti_5.72O₁₆, which has been proposed for the cesium-specific conditioning, can be synthesized either by an alcoxyde or a dry route. In both cases, a two-step protocol is applied, i.e., a calcination at 1000 °C followed by a sintering at 1200 °C. After sintering, both synthetic processes lead to a tetragonal form. According to the X-ray diffraction (XRD) patterns collected at the barium and the cesium K absorption edges, the different positions of these two elements have been evidenced with a more centered position in the oxygen cubic site of the tunnel for Ba than for Cs. On the contrary, after calcination, the two synthetic routes yield different products. The alcoxyde route gives rise to a mixture of the aforementioned Cs- and Ba-containing tetragonal I4/m hollandite, a Cs-only-containing monoclinic I2/m hollandite and an unidentified phase with a weak coherence length containing only Ba. The dry route yields a single tetragonal hollandite material containing Ba and Cs slightly different in composition from the targeted compound.     

Influence of Pore-expansion Agent on the Structure and Performance of Activated Alumina Synthesized from Waste Aluminum Sludge

1 INTRODUCTION The reactivity of activated alumina adsorbent is closely related to its specific surface area: the larger the specific surface area, the better its activity and adsorbent capability are. However, in reality, the prac- tically available specific surface area or effective spe- cific area has relationship with its pore structure[1]. Since many reactant molecules are difficult to enter the pores to react with whose radius is shorter than certain critical value, the increase of p…     

垃圾在流化床中焚烧NO排放特性研究

在Ф150 mm流化床上，研究了六类典型组分垃圾NO转化率与床温和过量空气系数(excess air简称EA)的关系。研究发现，纸渣与木块NO转化率最高，橡胶与塑料最低;织物、纸张、厨余、木块、塑料NO均具有中温生成特性，一般在800 ℃～850 ℃时即接近最大值，之后温度升高对NO的生成影响不大;橡胶与无烟煤由于含N化合物结构稳定，其NO转化率随床温升高而增大;由于挥发分析出的相互影响，较低的火焰温度，混合垃圾NO转化率一般低于单组分垃圾的线性叠加;少量水分不会对垃圾NO转化率造成很大影响，相反还会促进NO的转化，但过量水分会抑制NO的生成。     

Microwave assisted low temperature synthesis of sodium zirconium phosphate (NaZr<Subscript>2</Subscript>P<Subscript>3</Subscript>O<Subscript>12</Subscript>)

Sodium zirconium phosphate [NaZr₂P₃O₁₂], a potential ceramic matrix for fixation of high level nuclear waste, was synthesized by heating the mixture of sodium carbonate [Na₂CO₃], zirconyl nitrate hydrate [ZrO(NO₃)₂·5H₂O] and ammonium dihydrogen phosphate [NH₄H₂PO₄] in air, in a resistance heated furnace and a microwave heating system respectively in the temperature range 450 to 650°C. The mixture heated for 1 h in a resistance furnace at 450°C yielded a poorly crystalline NaZr₂P₃O₁₂ [NZP]. Increasing the temperature to 650°C produced a highly crystalline product. The same mixture heated in a microwave oven at 450°C for 1 h however, yielded the most crystalline NZP.In an alternate method, the mixture of sodium dihydrogen phosphate (NaH₂PO₄), zirconium dioxide (ZrO₂) and diammonium hydrogen phosphate [(NH₄)₂HPO₄] heated in resistance furnace at 650°C for the same period did not react in air. It also did not yield the pure product at 450°C when heated in microwave assembly for 1 h.The authors thank the Board of Research in Nuclear Sciences (BRNS) of the Department of Atomic Energy (DAE) for the financial support for this work under the project No. 2000/37/19/BRNS/1959 dtd09-02-02.