Retention characteristics of volatile compounds on tenax TA

The chromatographic separation properties of long, thin adsorption tubes enable substance-specific quantitative enrichment and reduction to be achieved when sampling and thermal desorption are carried out in the same flow direction. The specific retention volumes, and also the breakthrough and peak end volumes, of 69 compounds in the boiling range between-164 and 126°C and of a relative molecular mass between 16 and 119 were determined at temperatures between 30 and 130°C: normal alkanes, isoalkanes, cycloalkanes, alkenes, polyenes, alkynes, aromatics, ethers, alcohols, aldehydes, ketones, carboxylic acids and their esters, nitroalkanes, O-heterocycles, S-heterocycles, chloroalkanes, water, nitrogen monoxide, nitrogen dioxide, carbon dioxide, and sulfur dioxide. The correlation between adsorbent temperature and specific retention volume of these components, presented in the form of diagrams, permits the required quantity of adsorbent to be determined for a given sample volume. Contrary to literature sources, even extremely volatile compounds such as propane, propene, methanol, formaldehyde, formic acid, and chloromethane can be quantitatively retained on Tenax provided the operating conditions are appropriately selected.     

MH—Ni电池封口化成及其性能

在硼氢化钾碱性溶液中对金属氢化物（ＭＨ）电极的表面进行化学还原处理，提高了ＭＨ电极的放电容量、活化性能和电催化活性．用其为负极组装的ＡＡ型ＭＨ－Ｎｉ电池进行了封口化成，电池放电容量达到１１５０ｍＡｈ，５Ｃ下电池的放电容量达到０．２Ｃ下容量的８０％以上，电池在１Ｃ１００％ＤＯＤ（放电深度）充放电条件下，循环寿命由原来的１００次左右提高到２００次以上     

Metal Nanoparticles on Stainless Steel Surfaces as Novel Heterogeneous Catalysts

The goal of this work was the development of a novel type of heterogeneous catalyst, consisting of bare metal nanoparticles on stainless steel foils, which can be shaped to any kind of architecture and, if necessary, heated electrically. Solutions of pre-prepared, ligand protected and monodispersed gold, palladium, platinum and rhodium nanoparticles were sprayed onto stainless steel foils, followed by the careful removal of the ligand molecules by an oxygen plasma treatment. Due to this, bare particles become irreversibly fixed on the steel support. It could be shown that the original particle sizes do not change during the plasma treatment. Foils, densely coated with the nanoparticles, were used for gas phase catalyses in a self-made reactor at room temperature or at 60 °C. Hydrogenation of 1,3-butadiene at 15 nm Pd and 2 nm Pt, CO oxidation at 16 nm, 8 nm and 1.4 nm gold and NO reduction with NH₃ at 2 nm Rh particles were performed, indicating that the novel catalysts might in principle be applicable in technical processes if the experimental conditions like form and temperature would be optimized. Dedicated to Professor Dieter Fenske on the occassion of his 65th birthday.     

Pd-H from Pd/C and triethylamine: Implications in palladium catalysed reactions involving amines

The palladium hydride-iminium complex generated from Pd/C and triethylamine catalyses the isomerisation of allylic alcohols into carbonyl compounds, and Pd/C catalyses the conjugate reduction of activated double bonds using triethylamine as the source of the two newly incorporated hydrogen atoms via the same complex.     

Mass transfer to horizontal gas-generating electrodes

Mass transfer to a horizontal electrode during electrolytic evolution of oxygen and hydrogen at current densities of 100 to 10 000 A/m² is studied. The mass transfer intensity is evaluated from the diffusion layer thickness, which varies from 60 to 5 μm at such current densities. Calculations show that the decrease in the diffusion layer thickness is due to bubbles with a stationary interphase surface crossing the diffusion layer. During the hydrogen evolution, the diffusion layer thickness is nearly the same for vertical and horizontal electrodes. During the oxygen evolution, the diffusion layer is much thinner for a horizontal electrode. Additional decrease of the diffusion layer thickness during the evolution of oxygen is associated with the lesser solution density in the near-electrode layer and with its transport away by means of natural convection.     

Active nickel-based reduction of organic compounds

The reducing system NiCl₂·2H₂O—Li—arene_cat (cat is catalyst) was proposed for use to reduce a wide range of organic compounds, including alkenes, alkynes, carbonyl compounds, imines, halogenated derivatives, sulfonates, aromatic compounds, hydrazines, azo and azoxy compounds, N-oxides, and nitrones. The degree of reduction can be controlled for some substrates. Deuterium can be incorporated in the reaction products using nickel chloride deuteriohydrate. Nitrones, N-alkoxyamides, and acyl azides are also reduced with the Li—arene_cat system containing no nickel salt.     

Synthesis of nitro and amino derivatives of benzothiacrown ethers

The condensation reaction of 1,2-bis(2-haloethoxy)-4-nitrobenzenes with acyclic α,ω-(oxa)alkanedithiols in the presence of alkali metal carbonates produced a series of nitrobenzodithiacrown ethers with macrocycles of different size. The structures of three ethers were established by X-ray diffraction. A new method was developed for the synthesis of nitrobenzomonothia-15-crown-5 ether. Nitro derivatives of benzodithiacrown ethers were tested as reagents for extraction of palladium(II), platinum(IV), and rhodium(III) from hydrochloric acid solutions. Extraction of Pd^II salts was found to be highly selective compared to that of Pt^IV and Rh^III salts. Benzodithia-15-crown-5 ether is the most efficient extractant for palladium(II). Reduction of nitrobenzothiacrown ethers with hydrazine hydrate in the presence of a platinum catalyst afforded their amino derivatives. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 958–966, May, 2007.     

Determination and fractionation of sulphur in a contaminated dredged sediment

Conversion of sulphur compounds in reduced, contaminated sediments that are brought in upland conditions may largely affect the potential mobility of heavy metal contaminants. We applied selected methods for the determination of total sulphur and sulphur fractions in a contaminated sediment in the reduced state and after gradual drying and oxidation during 1 month. Dry ashing, followed by ion chromatographic detection, was reliable for the determination of total sulphur. Good recoveries were obtained in both reference samples and spiked samples. Total sulphur was 14.5±0.6 g kg⁻¹ relative to dry sediment. Wet chemical methods that involve the determination of acid-volatile, Zn–HCl-reducible, chromium-reducible, acetone-soluble and HI-reducible sulphur were used to estimate specific sulphur forms. Results for acetone-soluble sulphur were to high and not consistent with results for other fractions. Major part of sulphur in the sediment (90%) was inorganic. Sulphides were converted partially to sulphate and to intermediary oxidised sulphur compounds upon oxidation of the sediment. The results suggested that the intermediary oxidised sulphur pool in the reduced sediment (2.5 g kg⁻¹) mainly consisted of pyrite, that was not converted during drying and oxidation. No significant changes in organic sulphur were detected.     

分散法制备的CuCl/MCM-41上C3H6选择催化还原NO反应的研究

研究了由分散法制备的两种CuCl/MCM-41催化剂上丙烯在过量氧存在下选择催化还原NO反应, 发现所制备的CuCl/AlMCM-41催化剂的反应活性明显高于CuCl/SiMCM-41. XRD, IR, TPR及ESR的研究结果表明, CuCl/AlMCM-41催化剂上的主要活性中心是与骨架铝配位的铜离子(Cu2+/Cu+).