具有特定孔道结构的分子筛骨架的设计

引入“禁区”的概念用于设计具有特定孔道的分子筛骨架结构，在模拟中，首先在某一设定晶胞中定义一个圆柱形禁区(类似分子筛中的孔道)，然后向禁区外投入独立T原子，根据对称性、原子间距不小于3．0A(Si～Si)的限定条件产生等效原子，用Cerius^2建立骨架模型，并进行结构修正，通过改变禁区半径、独立T原子数及晶胞参数，在P6／mmm(no．191)空间群中成功地设计了大量不同拓扑结构的分子筛骨架，其中既有已知骨架，如：LTL、MWW、DOH、DFO等，又包括很多结构新颖、能量合理的理论结构，这种方法为快速寻找具有特定孔道的新颖分子筛骨架结构提供了有效的途径，有利于分子筛材料的定向设计与合成。     

高速数字存储示波器的超前滞后电路设计

数字存储示波器的核心是时基电路，超前／滞后控制电路是时基电路的核心。其设计是数字存储示波器的关键。用可编程语言FPGA实现设计了用前置计数器和后置计数器控制触发点前后的采集样点数和数据的方案。     

Compact difference approximation with consistent boundary condition

For simulating multi-scale complex flow fields it should be noted that all the physical quantities we are interested in must be simulated well. With limitation of the computer resources it is preferred to use high order accurate difference schemes. Because of their high accuracy and small stencil of grid points computational fluid dynamics (CFD) workers pay more attention to compact schemes recently. For simulating the complex flow fields the treatment of boundary conditions at the far field boundary points and near far field boundary points is very important. According to authors' experience and published results some aspects of boundary condition treatment for far field boundary are presented, and the emphasis is on treatment of boundary conditions for the upwind compact schemes. The consistent treatment of boundary conditions at the near boundary points is also discussed. At the end of the paper are given some numerical examples. The computed results with presented method are satisfactory.     

空气水两相段塞流的跟踪模拟及试验研究

分析了前人提出的段塞跟踪模拟方法的优缺点 ,根据液塞头部的加速压降和入口液塞长度分布特征对段塞跟踪模型进行了改进。采用面向对象技术 ,实现了水平和倾斜管道段塞流的跟踪模拟 ,并与多相流试验环道的空气水试验数据进行了对比。模拟结果表明 ,当不考虑加速压降时 ,用跟踪模型预测的压降低于实测值 ;当考虑加速压降时 ,用跟踪模型预测的压降高于实测值。在管道上固定位置测出的压力信号符合正态分布 ,管道上某一固定点处液塞头部和尾部的速度分布也符合正态分布。当不考虑气泡尾波作用时 ,液塞长度沿管线增长较慢 ,分布形状无变化 ;但是考虑气泡尾波作用时 ,在入口附近液塞长度平均值增长较快 ,统计分布沿管轴向呈对数正态分布。     

边水驱油藏调剖技术

针对边水驱油藏的地质及开发特点 ,提出了边水调剖技术 ,同时对调剖井点的选择、调剖剂的筛选、调剖剂用量的确定、调剖施工工艺等配套技术进行了研究。通过向优选的调剖井注入调剖剂 ,可以控制边水的侵入方向和推进速度 ,从而增大波及系数 ,提高最终采收率。 2 0 0 0年 5月到 1 1月 ,对高 1 0 4 5区块 8口井进行了边水调剖试验 ,共注入调剖剂 1 851 6m3。调剖后 ,内部井的含水率下降、产量回升 ,明显提高了区块的采收率。数值模拟预测结果表明 ,调剖增油超过 70 0 0t,投入产出比大于 1∶2。     

Design Optimization of Charger Based on PSPICE Simulation

The design of a high-frequency switching mode charger (HFSMC) was optimized using a PSPICE simulation of the charging system including a valve regulated lead-acid (VRLA) battery pack and the HFSMC.A high-frequency battery charging circuit model was developed to describe the battery dynamics when charging with DC current having high-frequency ripples. An IGBT circuit model, a high-frequency pulsed transformer coupling model and a silicon fast recovery diode model were also developed. Simulations were compared to laboratory measurements to verify the battery and system models. Simulation of the working states of an Fe-based nanocrystalline magnetic core used in the transformer shows that the transformer design can be optimized by adjusting the core gap and by employing an RC network. Further simulations show that the components in the output unit of the charger main circuit can also be optimized. Simulations also show that the battery dynamics Including the inductance should be considered for design optimization of the HFSMC.     

地球上远程抛射体的运动轨迹及计算机模拟

本导出了远程抛射体的运动轨迹，建立了一种计算机模拟实验的方法并画出了轨道图像．为理论研究提供了一种实验方法．     

A UDDI Based Shared Resources Management Mechanism in Virtual Enetrprises .

Service and information resources are two kinds of major shared resources in virtual enterprises, where, service resources include third party‘s service resources and enterprise‘s legacy service resources, and information resources include database resources and file resources. Since service and information resources have distributed, autonomic, remotely bound as well as some other similar characteristics, an implementation mechanism on managing shared resources based on UDDI are presented. XML instances are used to describe resources authorization information, WSDLbased special XML instance represents information resource metadata, and these XML instancesare referenced by tModel for realizing the purpose of managing shared resources metadata based on UDDI.     

二维磁性纳米结构材料的Monte Carlo模拟

运用Monte Carlo模拟方法，通过分折系统自旋序参数与温度的变化关系了解纳米结构材料磁性的特征．计算模拟结果表明，磁性纳米材料具有比同等大小和平均密度的单晶低的居里温度，且在相变过程中往往会出现一些亚稳态．研究结果提供了一种解析金属纳米结构材料特性的重要方法．     

Apache在校园网络中的应用研究

Apache在Internet中的WWW服务器领域，占有无可争议的领先地位．讨论了Apache服务器的实现原理，介绍了Apache的安装和配置过程．并结合实例就Apache在校园网络中的一些常见应用进行了分析，包括为用户提供个人主页服务和虚拟主机的服务等。