基于卷积模型的核信号仿真

NaI(Tl)探测器因具有探测效率高和成本低等优点,常被用于核辐射能谱测量和核辐射监管等领域．由于实验条件等的限制,研究人员往往较难获取理想的实验核信号,虽然可以借助探测器的仿真信号来实现研究目的,但是常规的探测器单指数或双指数模型和实际采集到的核信号模型存在一定的差异,需要一种更为精准的数学模型对探测器输出信号进行描述．我们通过对探测器信号形成过程分析,将探测器视为线性时不变系统,探测器各个部分响应的总卷积即为输出的核信号模型．本文建立的探测器输出信号卷积模型,结合实测伽玛源的幅度分布规律和相邻脉冲时间间隔分布规律,可以提供更精确的NaI(Tl)探测器输出信号,以便用于伽玛能谱测量算法研究;通过调节脉冲间隔时间大小,可以仿真不同计数下探测器输出信号的堆积情形,以便用于堆积信号还原算法研究．经过与伽玛辐射源的对比测试,该仿真信号与真实探测器输出信号一致,既避免了研究人员接触放射源,提高辐射防护安全性,又为开展数字化核信号处理算法研究及能谱算法研究提供了极大的便利性．     

正交激励超声切削装置的椭圆轨迹偏转与校正

为研究超声椭圆振动切削（ultrasonic elliptical vibration cutting,UEVC）刀尖轨迹形成及控制,解决刀尖轨迹非正椭圆问题,建立二维正交柔性导波UEVC装置刀尖轨迹的运动学模型;分析90°相位差下非正椭圆轨迹产生原因,建立刀尖轨迹校正模型,并推导出基于正椭圆轨迹下的刀尖轨迹偏转模型。通过实验对刀尖轨迹校正模型进行验证,校正后轨迹偏离坐标轴1.67°,小于校正前偏离角度。实验结果表明,该模型能够有效地校正刀尖轨迹,可在轨迹控制方面为后续研究刀尖轨迹偏转及变刀尖轨迹超声振动加工提供理论基础。     

旋转输液管动力稳定性理论分析北大核心CSCD

基于Lagrange原理和假设模态法建立了旋转输液管的动力学模型.通过降阶升维的方法求解系统的特征值问题,并分析了旋转输液管自由振动特性.得到了不同端部集中质量和转速下,系统特征值随流速升高的演变轨迹.揭示了临界流速随系统参数的变化规律.研究发现,内部流体的流动对旋转输液管动力学特性存在显著影响.在某些参数组合下,系统低阶模态能够形成不同形式的内共振关系.预示了旋转输液管模型蕴含丰富的动力学现象.     

Effects of Cone Angles on Nonlinear Vibration Responses of Functionally Graded Shells北大核心CSCD

The nonlinear vibration responses of functionally graded materials (FGMs) shells with different cone angles under external loads were studied. Firstly, the Voigt model was employed to describe the physical properties along the thickness direction of FGMs conical shells. Then, the motion equations were derived based on the 1st-order shear deformation theory, the von Kármán geometric nonlinearity and Hamilton’s principle. Next, the Galerkin method was applied to discretize the motion equations and the governing equations were simplified into a 1DOF nonlinear vibration differential equation under Volmir’s assumption. Finally, the nonlinear motion equations were solved with the harmonic balance method and the Runge-Kutta method, and the amplitude frequency response characteristic curves of the FGMs conical shells were obtained. The effects of different material distribution functions and different ceramic volume fraction exponents on the amplitude frequency response curves of conical shells were discussed. The bifurcation diagrams of conical shells with different cone angles, as well as time process diagrams and phase diagrams for different excitation amplitudes, were described. The motion characteristics were characterized by Poincaré maps. The results show that, the FGMs conical shells present the nonlinear characteristics of hardening springs. The chaotic motions of the FGMs conical shells are restrained and not prone to motion instability with the increase of the cone angle. The FGMs conical shell present a process from the periodic motion to the multi-periodic motion and then to chaos with the increase of the excitation amplitude. © 2022 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

Fastiterative methods for least squares estimations

Least squares estimations have been used extensively in many applications, e.g. system identification and signal prediction. When the stochastic process is stationary, the least squares estimators can be found by solving a Toeplitz or near-Toeplitz matrix system depending on the knowledge of the data statistics. In this paper, we employ the preconditioned conjugate gradient method with circulant preconditioners to solve such systems. Our proposed circulant preconditioners are derived from the spectral property of the given stationary process. In the case where the spectral density functions() of the process is known, we prove that ifs() is a positive continuous function, then the spectrum of the preconditioned system will be clustered around 1 and the method converges superlinearly. However, if the statistics of the process is unknown, then we prove that with probability 1, the spectrum of the preconditioned system is still clustered around 1 provided that large data samples are taken. For finite impulse response (FIR) system identification problems, our numerical results show that annth order least squares estimator can usually be obtained inO(n logn) operations whenO(n) data samples are used. Finally, we remark that our algorithm can be modified to suit the applications of recursive least squares computations with the proper use of sliding window method arising in signal processing applications.Research supported in part by HKRGC grant no. 221600070, ONR contract no. N00014-90-J-1695 and DOE grant no. DE-FG03-87ER25037.     

雷达辐射源信号双谱二次特征提取方法

现有的双谱特征提取方法可以满足信号分类识别，但是出现了交叉项、平凡双谱以及特征维数过高等一些问题。针对以上问题，提出一种双谱二次特征提取方法，将双谱转化为灰度图像，以灰度值表示双谱幅度；再利用图像处理技术提取双谱二次特征，提取出能够表征辐射源信号双谱图像纹理信息的灰度共生矩阵特征集；将该特征集与Hu-不变矩特征集进行对比实验。仿真结果表明：该方法具有更好的分类识别性能，对于CW、LFM和NLFM信号的平均识别率均达90%以上。     

一种改进的树形矢量量化编码算法

矢量量化中的一个最严重的问题是在一本码本中搜索最近码字的高计算复杂度。本文在研究树形矢量量化的基础上提出了一种改进的树形矢量量化编码算法。实验结果表明,本文提出的编码算法相对于树形矢量量化算法可大大改善峰值信噪比（ＰＳＮＲ）。     

磨削加工的声发射信号分析

对磨削加工中产生的声发射信号进行了分析,讨论了磨削过程中声发射信号影响因素,指出各种声发射信号与其磨削加工状态与有着良好的对应关系,可以用来对磨削加工过程和磨削质量进行监控。     

离散正交小波包及其在噪声抑制中的应用

研究有限长序列的小波包处理和噪声抑制的方法,方法用正交共轭滤波器构造有限维内积空间的正交值和分解及有限长离散小波包,分析了噪声的小波包分解系数的特性,并提出小波包变换域降噪的方法。     

爆破地震峰值的神经网络预报模型

对爆破地震值进行预报,方法,采用神经网络模型,对秦山核电站某爆破工程监测得到的２０组震动峰值数据进行学习,然后对另１０组数据进行预报。结果,实测值与预报所在分类区域完全一致。