After-Effects of Electrolytically diffused hydrogen in the second-order elastic coefficient of poynting’s effect in nickel and steel

Summary If hydrogen is diffused electrolytically in a metal, it subsequently escapes out if the metal is left to itself. However this hydrogen-treated metal does not totally regain the original magnitudes of its various physical properties,e. g., thermo e.m.f., electrical resistivity, elastic modulii etc. This effect has also been observed in the second-order elastic effect (the Poynting effect) in nickel and two varieties of steel. Measurements were carried out first before hydrogen diffusion. The samples were electrolytically diffused with hydrogen and the left to themselves for a few days and the measurements were repeated. The changed values of the coefficient of Poynting effect are discussed in terms of the dislocations created by in-and out-going hydrogen. Now retired     

改进的直接分支模态综合法

介绍了直接分支模态综合法的基本原理并通过算例对算法进行验算,分析了该方法计算结果很不准确的原因并进行了改进。改进的分支模态法将系统中主子结构的剩余模态加入,降低了略去高阶模态带来的严重误差。计算结果与有限元软件ANSYS的计算结果吻合较好,误差小于2%。改进的方法不仅使计算结果准确,而且保持了原方法的优点,适用于工程计算。     

挖坑机钻头主轴纵向振动系统模型的建立与控制

首先利用弹性杆理论和H am ilton变分原理建立了挖坑机钻头主轴及钻尖在工作过程中由于外激励的作用使钻尖与土壤互相作用而产生纵向振动的动力学模型,同时给出边界条件和初始条件.其次通过把系统外激励函数当作控制变量,利用Banach空间几何性质证明了此系统存在唯一最优控制元.     

用线性插值法求单摆运动周期的近似解

利用线性插值的方法,提出了一个任意摆角条件下的单摆运动周期的近似公式.并利用Mathematica软件将该公式与精确解进行了比较,还与其他近似公式进行了对比.结果表明,该公式的近似程度相当好.     

Bending-torsion vibration of a partially submerged cylinder with an arbitrary cross-section

An analytical method is presented to investigate the bending-torsion vibration characteristics of a cylinder with an arbitrary cross-section and partially submerged in water. The compressibility and the free surface waves of the water are considered simultaneously in the analysis. The exact solution of structure–water interaction is obtained mathematically. Firstly, the analytical expression of the velocity potential of the water is derived by using the method of separation of variables. The unknown coefficients in the velocity potential are determined by the longitudinal and circumferential Fourier expansions along the outer surface of the cylinder and are expressed in the form of integral equations including the unknown dynamic bending deflection and torsional angle of the cylinder. Secondly, the force and torque acting on the cylinder per unit length, provided by the water, are obtained by integrating the water dynamic pressure along the circumference of the cylinder. The general solution of bending-torsion vibration of the cylinder under the water dynamic pressure is derived analytically. The integral equations included in the velocity potential of the water can be solved exactly. Finally, the eigenfrequency equation of cylinder–water interaction is obtained by means of the boundary conditions of the cylinder. Some numerical examples for elliptical columns partially submerged in water are provided to show the application of the present method.     

利用驻波实验研究混沌现象

利用驻波实验演示了混沌现象,并对其进行了理论分析和计算机仿真研究.仿真结果与实验结果都表明:当连接点接近驻波波节处时,振动系统处于混沌运动状态;而当连接点接近驻波波腹处时,系统处于稳定驻波运动状态.     

超声波声孔效应中气泡动力学的研究

在超声快速制取组织细胞病理切片的过程中，发现激励信号对切片制取效果有明显的影响.为了掌握超声激励信号对组织细胞的影响规律，达到快速制取病理切片的最佳状态，从气泡空化模型入手，通过改变激励信号频率、声压、气泡初始半径和液体黏滞系数等参量，研究了声孔效应中气泡动力学激励机制.数值计算表明：空化泡振动随激励声压增强而升高，随液体黏滞系数增强而减弱；一定频率范围内空化泡振动能保持在膨胀、收缩和振荡的稳定空化状态，存在空化泡稳态振动的最佳激励频率；一定初始半径能保证空化泡产生稳定的振动，存在空化泡稳态振动幅度最大的初始半径.实际操作中，在频率、声压、初始半径和黏滞系数综合作用的若干空化阈内，声孔效应使超声快速法制取细胞组织切片获得最佳效果. 关键词： 声孔效应 超声空化 气泡振动 稳态空化域     

锅炉引风管道系统的振动分析

分析了锅炉引风管道系统的振动。为了降低噪声 ,提出了减少振动的一些措施     

应用LiNbO_3声表面波驱动的全光纤声光频移器

介绍一种工作在10.7MHz的全光纤声光频移器.它由在LiNbO_3基片上制作的叉指电极换能器产生的声表面波驱动.当驱动电功率1.5W时,频移光转换效率达35％.     

某火箭弹引信擦地炸机构微弹簧的动力学分析

对无后坐炮发射时火箭弹中引信擦地炸机构微小弹簧的运动进行了动力学分析。在考虑弹簧质量的情况下建立了弹簧和导电杆之间的物理模型。该模型的微分方程计算结果表明微小弹簧在弹道上的振动过程会使导电杆的受压产生周期性变化，尤其是在一些波谷处，导电杆几乎不受压力，此时如果有火箭加速和其它装配缺陷等因素的影响，就会引起弹丸在弹道上的早炸。