Calcium-based coordination polymers from a solvothermal synthesis of HKUST-1 in 3D printed autoclaves

A mixed-metal 1D coordination polymer [CaCu(HBTC)₂(H2O)₈]_n (where H₃BTC – benzene-1,3,5-tric arboxylic acid) was obtained in a solvothermal synthesis of a well-known copper-containing metal–organic framework [Cu₃(BTC)₂(H₂O)₃]_n (HKUST-1) in autoclaves 3D-printed from commercial polypropylene. This material was a source of calcium ions, apparently, leaking from a colorant (calcium carbonate) promoted by glacial acetic acid as a modulator used to produce large single crystals of HKUST-1. This finding was confirmed by elemental analysis and a model experiment that resulted in a new calcium-based 1D coordination polymer [Ca(H₂BTC)₂(H₂O)₅]_n under the same solvothermal conditions with no copper or calcium salts put into a 3D-printed autoclave.     

Flow-induced shear stress and deformation of a core–shell-structured microcapsule in a microchannel

A numerical model was developed and validated to investigate the fluid–structure interactions between fully developed pipe flow and core–shell-structured microcapsule in a microchannel. Different flow rates and microcapsule shell thicknesses were considered. A sixth-order rotational symmetric distribution of von Mises stress over the microcapsule shell can be observed on the microcapsule with a thinner shell configuration, especially at higher flow rate conditions. It is also observed that when being carried along in a fully developed pipe flow, the microcapsule with a thinner shell tends to accumulate stress at a higher rate compared to that with a thicker shell. In general, for the same microcapsule configuration, higher flow velocity would induce a higher stress level over the microcapsule shell. The deformation gradient was used to capture the microcapsule's deformation in the present study. The effect of Young's modulus on the microcapsule shell on the microcapsule deformation was investigated as well. Our findings will shed light on the understanding of the stability of core–shell-structured microcapsule when subjected to flow-induced shear stress in a microfluidic system, enabling a more exquisite control over the breakup dynamics of drug-loaded microcapsule for biomedical applications.     

基于混合优化算法的关节臂式测量机参数标定

为进一步提高关节臂式坐标测量机等高机动性精密测量设备的测量精度,使用D-H矩阵法建立其关节坐标转换数学模型并据此推导出参数误差模型.针对非线性多参数标定问题,通过变换分析消除了最小二乘法求解时矩阵中的冗余参数,降低了计算的复杂性.设定判定准则并实现最小二乘法和模拟退火算法的混合,提出了一种基于混合优化算法的参数标定方法,解决了LM算法的初值设定和SA算法的搜索效率逐步降低的问题.实验结果表明:关节臂式测量机参数经混合优化算法标定后,参数的误差范围有了显著的缩小,单点重复性误差的平均值减小了1.746 mm,长度误差的平均值减小了0.941 mm,测量误差得到了进一步的抑制.     

模具结构对连续纤维增强热塑性复合材料性能的影响

采用自行设计的两种不同结构的熔融浸渍模具制备了连续玻璃纤维增强聚丙烯预浸带，测试了模具结构对预浸带的孔隙率、纤维断裂率、界面形貌、纤维分散均匀度和拉伸强度的影响，建立了纤维浸渍模型和纤维断裂模型，并通过理论模型对预浸带的孔隙率和断裂率进行理论预测。结果表明，本文建立的数学模型能够有效预测预浸带的浸渍程度和纤维断裂率，可用于浸渍模具结构的优化设计；在本文范围内，与波浪形模具相比，斜齿形模具的多楔形区结构可以有效地降低预浸带孔隙率和提升纤维分散程度；波浪形模具的流道圆角半径较大，楔形区个数较少，与斜齿形模具相比，可有效降低纤维断裂率并提升拉伸性能。     

Alkaline oxygen evolution: exploring synergy between fcc and hcp cobalt nanoparticles entrapped in N-doped graphene

Herein, we report a Mott-Schottky catalyst by entrapping cobalt nanoparticles inside the N-doped graphene shell (Co@NC). The Co@NC delivered excellent oxygen evolution activity with an overpotential of merely 248 mV at a current density of 10 mA cm^–2 with promising long-term stability. The importance of Co encapsulated in NC has further been demonstrated by synthesizing Co nanoparticles without NC shell. The synergy between the hexagonal close-packed (hcp) and face-centered cubic (fcc) Co plays a major role to improve the OER activity, whereas the NC shell optimizes the electronic structure, improves the electron conductivity, and offers a large number of active sites in Co@NC. The density functional theory calculations have revealed that the hcp Co has a dominant role in the surface reaction of electrocatalytic oxygen evolution, whereas the fcc phase induces the built-in electric field at the interfaces with N-doped graphene to accelerate the H⁺ ion transport.     

共享自动驾驶汽车使用意愿模型及其影响因素

为了构建共享自动驾驶汽车(shared autonomous vehicles，SAV) 的使用意愿模型并分析其影响因素，通过使用时机和使用频率来体现公众对SAV的使用意愿；采用验证性因子分析将态度潜变量转化为潜变量得分，以此将态度潜变量引入传统的有序Logit模型；提出SAV使用意愿的有序Logit模型构建方法，并建立基于个人属性、通勤特征、态度潜变量的SAV使用意愿模型.研究发现:是否使用过滴滴拼车、工作单位停车费、自动驾驶态度对使用时机和3种价格(1，2，3元/km) 下的使用频率有显著影响；使用过滴滴拼车、工作单位收取停车费、支持自动驾驶的群体倾向于频繁地、更早地使用SAV出行；公众期望以1元/km或 2元/km即不超过目前滴滴拼车的价格使用SAV.     

偏缠绕模的Frobenius性质

主要给出了偏缠绕模的Frobenius性质，推广了缠绕模相应的性质。