质量加权坐标系下水分子2种特殊振动模式的DVR计算

在质量加权坐标系下用离散变量表示(DVR)方案研究了H2O基电子态2种特殊振动模式的振动光谱.计算中应用多项式函数拟合从头算结果得到的内坐标系下的基态解析势能面,经坐标变换得到质量加权坐标系下的相应势能面.分子的哈密顿形式在质量加权坐标下给出.用H2O振动能级的计算验证算法的可行性,从而为二维多光子电离光电子能谱的模拟奠定理论基础.     

中性线修正型变截面梁类构件压电控制

传统绝对节点坐标法(absolute nodal coordinate formulation,ANCF)在变截面梁类构件建模过程中常以几何中位线等效构造单元中性线,难以对变截面单元位移场状态进行精确描述.为解决此类问题,本文以中细型变截面梁类构件为研究对象,深入考虑变截面结构几何因素及复合材料属性对变截面梁类构件中性...     

刃型位错和圆弧形刚性线夹杂的干涉效应

位错和夹杂的干涉效应对于理解材料的强化和韧化机理具有十分重要的意义。文中研究了晶体材料中刃型位错和多条共圆弧刚性线夹杂的干涉作用。利用Riemann—Schwarz反照原理和复势函数的奇性主部分析技术，得到了问题的一般解答；对于只含一条刚性线夹杂的情况，给出了复势函数的封闭形式解。由Peach-Koehler公式求出了作用在刃型位错上的位错力，并讨论了圆弧形刚性线夹杂对位错力的影响规律，发现弧形刚性线对刃型位错有很强的排斥作用。本文解答不但可作为格林函数获得任意分布位错的相应解答，而且可以用于研究刚性线夹杂和任意形状裂纹的干涉效应问题。     

一种时变滑模平面的设计方法

在分析滑模平面设计的基础上,指出了按传统的方法设计的滑模平面的缺陷。为了克服此缺陷,根据矩阵分析理论提出了一种新的具有全局鲁棒性的时变滑模平面的设计方法,并给出了三种具体的滑模平面形式。通过理论分析和计算机仿真可以看出,基于该方法设计出滑模平面的变结构控制系统,能保证系统从任意的初始状态开始就处于设定的滑模平面上,对参数摄动和外部干扰具有很强的鲁棒性。用该方法设计出的时变滑模平面是传统的滑模平面的     

动水环境中射流喷角对射流特性影响数值模拟

在应力代数模型基础上引入密度状态方程建立了变密度的各向异性湍浮力射流模型,并给出了浮力系数的简单计算式.对存在密度差的射流进行了数值计算,所得轨迹线与实验结果吻合良好.应用有限体积法对流动环境中不同喷角二维立面射流流场特性进行了数值分析,对涡心及分离点位置与喷角关系的结果分析表明喷角为90°时回流区域最大.提出了面积湍动能kA概念,以此分析了流体间的掺混强度与喷角间的关系,结果表明喷角为90°时最有利于射流水体与环境水体间的掺混.     

Variable spaced particle in mesh-free method to handle wave-floating body interactions

In this work, the motion of a two-dimensional rectangular freely floating body under waves is simulated using Improved Meshless Local Petrov-Galerkin method with Rankine Source function (IMLPG_R) with variable spacing resolutions. The IMLPG_R method is a particle method that solves Navier–Stokes equations using the fractional step method to capture the wave properties. However, many existing particle methods are computationally intensive to model the wave-floating body due to the requirement of fine particles, needing uniform distribution throughout the domain. To improve the computational efficiency and capture the body response properly, variable spaced particle distribution with fine resolution near the floating body and coarse resolution far from the body is implemented. Numerical schemes to handle variable resolutions are reported. An iterative scheme to handle the wave-floating body is implemented in the particle method. Two test cases, one with small wave and another with steep waves, are simulated for uniform particle distribution and the result shows good agreement with literature. Based on this, the performance of the variable spaced particle distribution is tested in coupling with floating body solver. The application of the method for wave impact load from the green water loading of the floating structure is also simulated.     

变拓扑机构可变运动副设计目录研究

可变运动副作为变拓扑机构改变拓扑结构的关键所在,其结构设计是变拓扑机构构型综合的难点.基于可变运动副拓扑变化方式的研究,构建可变运动副设计目录,用于可变运动副的结构设计.分别针对可变运动副的改变轴线方位、改变数目和改变类型等三类拓扑变化过程,分析可变运动副的约束变化特征,并采用运动副约束函数的算术运算进行描述.在归纳设计可变运动副结构形式的基础上,对可变运动副拓扑变化方式、约束变化特征和对应结构等设计信息进行分类和汇编,构建可变运动副设计目录.应用实例表明,采用可变运动副设计目录,能快速有效地设计可变运动副结构,为含可变运动副的变拓扑机构构型综合提供了方便.     

Density and velocity statistics in variable density turbulent mixing

We experimentally study variable–density mixing of miscible gases in an open-circuit wind tunnel using simultaneous particle image velocimetry and planar laser-induced fluorescence. Experiments of a high Atwood number (0.6) and low Atwood number (0.1) are performed to compare non-Boussinesq cases with the Boussinesq limit. The higher density gas is injected into the wind tunnel co-flow using a round jet configuration, and near-field and far-field measurements are performed to examine mixing in both momentum and buoyancy-dominated regimes. The effects of buoyancy are measurable and important in both large-scale mixing features and in turbulence quantities. The low Atwood number PDFs (probability density functions) show fast and uniform mixing. The high Atwood number PDFs of density have skewness towards the larger densities, indicating less mixing of the heavy fluid due to its inertia. The skewness in the density gradient PDFs at high Atwood number displays strong density local variations that can enhance mixing at molecular scales. Turbulent kinetic energy decreases with streamwise distance from the jet for low Atwood number but increases for high Atwood number due to larger buoyancy and density-driven shear. Over 3000 experimental realisations are used to calculate statistical characteristics of the mixing, including valuable and rarely given data such as Favre-averaged turbulent quantities: mass flux velocity, Reynolds stress, turbulent kinetic energy, and density-specific volume correlation. Buoyancy effects are observed in these quantities and the trends are compared qualitatively with direct numerical simulations.     

A proof of W. T. Gowers' theorem

W. T. Gowers' theorem asserts that for every Lipschitz function and 0$">, there exists an infinite-dimensional subspace of such that the oscillation of on is at most . The proof of this theorem has been reduced by W. T. Gowers to the proof of a new Ramsey type theorem. Our aim is to present a proof of the last result.

     

Barzilai–Borwein method with variable sample size for stochastic linear complementarity problems

A smoothing method for solving stochastic linear complementarity problems is proposed. The expected residual minimization reformulation of the problem is considered, and it is approximated by the sample average approximation (SAA). The proposed method is based on sequential solving of a sequence of smoothing problems where each of the smoothing problems is defined with its own sample average approximation. A nonmonotone line search with a variant of the Barzilai–Borwein (BB) gradient direction is used for solving each of the smoothing problems. The BB search direction is efficient and low cost, particularly suitable for nonmonotone line search procedure. The variable sample size scheme allows the sample size to vary across the iterations and the method tends to use smaller sample size far away from the solution. The key point of this strategy is a good balance between the variable sample size strategy, the smoothing sequence and nonmonotonicity. Eventually, the maximal sample size is used and the SAA problem is solved. Presented numerical results indicate that the proposed strategy reduces the overall computational cost.