1，2—二氯丙烷裂解反应光窗结焦机理的研究

有机化合物在光窗上的结焦严重地影响激光引发化学反应及光学原位实时探测。本文报道在1，2－二氯丙烷反应系统中，光窗结焦现象同时存在于激光引发反应及热反应过程中，对光窗在300℃条件 下的结焦机理研究表明，少量氧气在光窗结焦过程中起关键作用。结焦前驱体的红外光谱研究表明，前驱体的可能结构为1－丙炔－1，3－二醇的缩聚体。该化合物极易通过缩聚反应形成更大的分子，最终导致光 窗结焦。对系统及反应物进行彻底除氧，光窗结焦现象大为改善。     

对聚苯树脂炭化产物作为锂离子电池碳电极材料的研究Ⅱ.炭化产物制备的电极材料组装的锂离子电池电化学性能

电化学性质;对聚苯树脂炭化产物作为锂离子电池碳电极材料的研究Ⅱ.炭化产物制备的电极材料组装的锂离子电池电化学性能     

Physicochemical and Quality Properties of Dried Courgette Slices: Impact of Vacuum Impregnation and Drying Methods

The aim of this study was to determine the effects that the type of impregnating solution and drying method (freeze drying (FD) and vacuum drying (VD) at 45 °C and convective drying (CD) at 50, 60, and 70 °C) had on the physicochemical and quality properties of courgettes. Courgette slices were vacuum-impregnated (6 kPa) in freshly squeezed onion, kale, and onion and kale (50:50) juices with 3% NaCl solution (N). The application of vacuum impregnation (VI) with impregnating solutions from freshly squeezed onions and kale had a beneficial effect on the bioactive values of courgette. The highest contents of quercetin (41.84 μg/g d.m.) and carotenoids (276.04 μg/g d.m.) were found in courgette impregnated with onion juice after freeze drying. The highest values of lutein and zeaxanthin (216.42 μg/g d.m.) were recorded for courgette impregnated with kale juice and convective dried. By analysing the kinetics of convective drying, the best matching of the logistic model was found. Increasing the drying process temperature from 50 to 70 °C reduced the drying time from 15% to 36%, depending on the type of impregnating solution used. Water activity < 0.6 was recorded for courgette dried by freezing, vacuum, and convection at 60 and 70 °C. Conclusions: The vacuum impregnation process and the impregnation solutions from freshly squeezed vegetables can be used to develop new snacks with high levels of bioactive compounds. The FD method is the most appropriate considering both the bioactive compounds content and the obtained colour and water activity.     

Carbonized cotton fibers via a facile method for highly sensitive solid‐phase microextraction of polycyclic aromatic hydrocarbons

Cotton fiber is an environmentally friendly and natural material with a certain extraction capacity, while its enrichment ability is poor. In order to improve the extraction efficiency of cotton fibers, it was carbonized to form a layer of amorphous carbon as the sorbent by a simple carbonization method. Carbonized cotton fibers were filled into a polyetheretherketone tube for in‐tube solid‐phase microextraction. The carbonization time was investigated to obtain high extraction efficiency. Coupled to high‐performance liquid chromatography, the extraction tube was evaluated with polycyclic aromatic hydrocarbons, estrogens and phthalates, and it exhibited best extraction efficiency for polycyclic aromatic hydrocarbons. Under the optimum conditions, an online analysis method for several polycyclic aromatic hydrocarbons was established with large linear ranges (0.016–0.20 μg/L), low limits of detection (0.005–0.020 μg/L), and high enrichment factors (948–2874). Analysis method was successfully applied to the detection of targets in the real samples and shown satisfactory durability and chemical stability. Moreover, the relative recoveries ranged from 82 to 119.2%, which demonstrated the applicability of carbonized cotton fibers in sample preparation. Compared with other reported methods, the proposed method provided shorter extraction time, higher enrichment factors, comparable limits of detection, and recoveries.     

Image Formation in Low Vacuum SEM

The role of positive gaseous ions in the formation of secondary electron images in low vacuum scanning electron microscopes is discussed. This paper describes the charging processes and related effects that occur during high vacuum imaging of insulators and then discusses the influence of ions on those processes. The ions are responsible for a number of phenomena, including distortion of the electric field above and below the specimen surface due to space charge, removal of excess negative charge from the specimen, alteration of the specimen surface barrier, and scavenging/filtering of the secondary electron emission. The resulting electron-specimen-ion interactions can give rise to interesting contrast effects that are unique to this class of instruments.     

Product Identification and Mass Spectrometric Analysis of n-Butane and i-Butane Pyrolysis at Low Pressure

The pyrolysis of n-butane and i-butane at low pressure was investigated from 823-1823 K in an electrically heated flow reactor using synchrotron vacuum ultraviolet photoionization mass spectrometry. More than 20 species, especially several radicals and isomers, were detected and identified from the measurements of photoionization efficiency (PIE) spectra. Based on the mass spectrometric analysis, the characteristics of n-butane and i-butane pyrolysis were discussed, which provided experimental evidences for the discussion of decomposition pathways of butane isomers. It is concluded that the isomeric structures of n-butane and i-butane have strong influence on their main decomposition pathways, and lead to dramatic differences in their mass spectra and PIE spectra such as the different dominant products and isomeric structures of butene products. Furthermore, compared with n-butane, i-butane can produce strong signals of benzene at low temperature in its pyrolysis due to the enhanced formation of benzene precursors like propargyl and C4 species, which provides experimental clues to explain the higher sooting tendencies of iso-alkanes than n-alkanes.     

Vacuum-ultraviolet induced oxidation of the polymers polyethylene and polypropylene

The emission from low-pressure microwave plasmas in the vacuum-ultraviolet (VUV) region (λ < 200 nm) was investigated in order to use these plasmas as light sources for the study of the VUV photochemistry of polyethylene (PE) and polypropylene (PP) as part of the study of plasma-polymer interaction. These polymers, immersed in low-presure oxygen, were exposed to radiation with wavelengths down to 112 nm, the cut off of magnesium fluoride used as a window to separate the polymer specimen from the plasma light source. Total oxygen incorporation in the surface [O], and the formation of hydroxyl, carbonyl, and carboxyl groups were measured using XPS in combination with chemical derivatizations, particularly their dependence upon the radiation spectrum and the oxygen pressure around the sample. In most experiments the surface oxygen concentration [O] attained a constant value that appears to be related to the initial oxidation rate; this suggests a competition between oxygen incorporation and chain scission reactions, followed by the removal of volatile oxidation products. PE is usually oxidized to a higher level than PP, the latter appearing to be more susceptible to reaction with atomic oxygen than PE. A general initiation mechanism for the VUV experiments is proposed that allows us to explain the observed differences in behavior between PE and PP, and the results obtained under different irradiation conditions. The nature of oxidation products is in both cases very similar to what is observed after direct plasma treatment of the polymers. We conclude that short wavelength radiation contributes very appreciably to the observed surface modification effects during plasma treatment of PE and PP. © 1995 John Wiley & Sons, Inc.     

聚乙二醇在高真空条件下的单链弹性

在过去二十年间，高分子的单链弹性已经得到了广泛的研究.然而由于环境和高分子之间往往有着复杂的相互作用，实验中很难得到高分子在严格无扰状态下的单链弹性（即本征弹性）.为此，利用单分子力谱技术研究了高真空条件下聚乙二醇（PEG）的单链弹性.结果表明，由于高真空条件下溶剂分子的干扰被消除，PEG在这一准无扰状态下呈现其本征弹性.在非极性有机溶剂中，由于溶剂分子和PEG之间只有微弱的范德华力作用，PEG表现出和高真空中基本一致的弹性.然而，在不同环境中，力曲线的低力区（F<100 pN）存在着细微的差异.这一现象可归因于不同条件下基底与PEG链之间的吸附力不同.采用的高真空力谱可用于研究其他高分子单链在准无扰状态下的本征弹性.     

缓慢炭化部分氧化对制备煤质活性炭的影响

研究了炭化升温速度、炭化低温区引入空气部分氧化对活性炭制备过程中炭化阶段、炭化物结构、活性炭性能等的影响。结果表明，炭化时低温部分氧化可提高炭化物得率，使炭化物微晶的ｄ００２值升高和Ｌｃ值减小；而较慢的炭化升温速度有利于制备优质活性炭。缓慢炭化、部分氧化可以在一定程度上控制炭化路径，使炭化向生成取向性差、难石墨化、各向同性、呒定形炭多的炭化物的方向进行；并讨论了它们控制炭化的作用机理。以此为指导，     

助剂Cu、K对F-T合成铁基催化剂作用的表征研究

采用连续共沉淀和喷雾干燥技术相结合的方法制备了一组Cu、K助剂单独或同时加入的微球状Fischer-Tropsch（F-T）合成铁基催化剂,借助低温N2吸附、MES、XRD、H2-TPR、CO-TPR研究了Cu和K助剂对催化剂织构、还原性能以及还原和炭化过程中的物相变化的影响。结果表明,K助剂的加入能明显提高催化剂的比表面积和铁物相在催化剂中的分散程度,增加了Fe2O3与SiO2间的相互作用;当催化剂在H2和合成气中还原时,Cu助剂的加入有利于催化剂的还原和Fe3O4的生成,在CO中还原时,Cu助剂的加入则有利于α-Fe的生成和稳定化。在H2和合成气中,单独K助剂的加入会抑制催化剂的还原或炭化,而Cu和K助剂的同时加入在H2、CO和合成气下均可使催化剂的还原或炭化能力明显提高,表明Cu和K助剂间存在一定的协同作用。