艇桨及外挂吊舱之间水动力性能干扰分析

基于CFD技术,采用RNGk-ε湍流模型及混合网格技术,数值模拟了某潜器孤立艇体、孤立螺旋桨、艇体吊舱模型、艇桨模型以及艇桨吊舱模型的水动力性能.分析了艇体、螺旋桨以及吊舱之间的相互干扰.计算结果显示:吊舱对艇体阻力和螺旋桨推力干扰较小;直航时,由于吊舱的存在,艇体吊舱模型产生了纵倾力矩以及升力,艇体阻力略有减小;艇桨干扰对艇体表面压力分布影响较大,以1.5m/s匀速航行时,由于螺旋桨的存在,艇桨模型中艇体总阻力增加18.03%,艇桨吊舱模型中潜器(艇体和吊舱)总阻力增加17.63%.     

基于差分Pattern时延差编码和海豚whistles信号的仿生水声通信技术研究

为解决传统的隐蔽水声通信方法带来的通信性能降低问题, 提出了一种将差分 Pattern 时延差编码通信体制与海豚whistles信号相结合的仿生水声通信技术. 海豚whistles信号频带较窄且各信息码元间隔不等、码元之间互相关性较弱, 选取whistles信号作同步码和Pattern 码, 并以相邻whistles信号之间的时延差值携带信息. 这种仿生的水声通信信号不易被敌方探测、截获, 且差分Pattern时延差特殊的编码方式也不易使信息被破译, 因此该水声通信技术具有较强的隐蔽性和保密性, 且在抗码间干扰以及抗多普勒效应方面具有优异性能. 本文对系统进行了水池实验, 在信噪比为0 dB、存在相对运动时实现了通信速率为67 bit/s的低误码数据传输, 验证了系统的有效性、稳健性和隐蔽性. 关键词： 仿生水声通信 差分Pattern时延差编码 海豚whistles信号 隐蔽性     

水下无线光通信自组织网性能分析

针对无线光通信工作频率高、通信频带宽、数据传输能力强、传输距离远的特点,提出建立水下无线光通信自组织网。为解决水下无线光通信点对多点通信的问题,提出了一种组合折反射镜,为建立移动自组织网（MobileAdhocNetwork,MANET）提供条件。研究利用OPNET对按需距离向量协议（AODV）进行仿真,通过设置移动节点参数模拟水下无线光通信自组织网,分析了不同网络规模、不同节点速度、不同发包率对网络的吞吐量、时延、误比特率等性能的影响。仿真结果表明,AODV在节点速度5m／s--10m／s以下,网络规模10个节点左右,发包率小于20packets／s时对网络拓扑变化的适应性较好。     

Tunable zeroth-order resonator based on a ferrite metamaterial structure

This paper proposes a tunable zeroth-order resonator on a composite right/left-handed transmission line consisting of a transversely magnetized ferrite substrate periodically loaded by microstrip inductors. Based on the propagation theory of edge guided modes, the analysis procedure of this structure is introduced. The numerical results demonstrate the tunability of the resonant frequency by changing the DC bias magnetic field applied to the ferrite. In contrast to previous work, the proposed structure is easy to design and fabricate and does not require a chip component.     

铝合金框架结构的弹体穿击损伤特性

针对直升机机身框架易受子弹弹击导致损伤问题,有必要开展机身铝合金框架结构的子弹穿击损伤特性研究.基于ABAQUS软件平台,采用修正后的Johnson-Cook模型,建立机身铝合金框架弹伤冲击的显示动力学模型,研究子弹弹头倾角和子弹材料等参数对铝合金框架的损伤特性影响.结果 表明:弹头倾角影响子弹穿透能力,但该影响存在临界值,到达临界值前,子弹穿透能力随着倾角的减小而增大;到达临界值后,继续减小倾角不再增大穿透能力;同时随着倾角的减小,框架的损伤面积先增大后减小,倾角为45°时损伤面积最大.子弹材料影响子弹的强度和刚度,影响子弹的穿透能力和破坏能力,计算结果表明铜质子弹的穿透能力大于钢质子弹,钢质子弹破坏能力大于铜质子弹.     

Author index to 2014

<正>~~     

Application of ionic‐liquid‐magnetized stirring bar liquid‐phase microextraction coupled with HPLC for the determination of naphthoquinones in Zicao

In this study, a green, rapid, and simple method, ionic‐liquid‐magnetized stirring bar liquid‐phase microextraction was developed for the determination of naphthoquinones, including shikonin and β,β′‐dimethylacrylshikonin, in Zicao. This method permits active magnetic stirring, extraction, and pre‐enrichment in a single device simultaneously, so the extract is conveniently collected. The analytes were extracted from the sample to ionic liquid‐magnetized stirring bar, then the analyte‐adsorbed magnetized stirring bar can be readily isolated from the sample solution by a magnet. The key experimental parameters were investigated and optimized, including the type and volume of ionic liquid, extraction time, salt concentration, stirring speed, and pH. The recoveries were in the range of 89.47–102.38%, and good reproducibilities were obtained with relative standard deviation below 5.36%. Compared with the conventional extraction methods, the proposed method is quicker and more effective.     

一种舰艇水下爆炸冲击响应的简化分析方法

针对舰船设计初期缺少水下爆炸冲击响应预估方法的问题,提出了一种将DDAM方法和Taylor平板理论相结合的舰艇水下爆炸冲击响应理论模型。该理论模型根据Taylor平板理论将船底简化为自由平板,根据DDAM方法将船体结构各层甲板简化为质量-弹簧系统以模拟各层甲板对底舱的反作用。计算得到了船体结构各层甲板冲击响应,并与缩比模型试验数据进行了对比验证。结果表明这种简化分析方法能够较好模拟舰艇舱段各层甲板在水下爆炸的冲击响应,可为舰艇设计初期的冲击环境预估提供借鉴。     

Prototype test study on mechanical characteristics of segmental lining structure of underwater railway shield tunnel

Based on the first unde rwater railway shield tunnel, the Shiziyang shield tunnel of Guangzhou Zhu- jiang River, the prototype test was carried out against its segmental lining structure by using ＂multi-function shield tunnel structure test system＂. And the mechanical characteristics of segmental lining structure using straight assembling and staggered assembling were studied deeply. The results showed that, the mechanical characteristics of segmental lining structure varied with the water pressures; especially after cracking, the high water pressure played a significant role in slowing down the growing inner force and deformation. It also testi- fied that the failure characteristics varied with straight assembling structure and staggered assembling structure. Shear thilurc often occurred near longitudinal seam when using straight assembling.     

Monitoring and analysis of shock wave in water for underwater drilling blasting

Taking the underwater reef blasting in Gulei sea channel of Xiamen Port as an example, the forming characteristic of shock wave in water for underwater drilling blasting is analyzed. By field monitoring, the pres- sure of shock wave in water for different distances is attained; the major parameters such as pressure amplitude and positive action time, and the propagation attenuation rule of shock wave in water are analyzed in this paper. The results can be helpful for engineering design and construction and environmental safety assessment.