Metabolomic-based investigation of Yinlan alleviating hyperlipidemia by inhibiting blood stasis and phlegm turbidity through the PXR-CYP3A4-ABCB1-FXR pathway

Yinlan lipid regulatory capsule (YL) is a composite traditional Chinese medicine (TCM) new drug to alleviate hyperlipidemia, while its therapeutic mechanism in vivo was not clarified with nontargeted metabolomics investigation. An animal model was established in rats fed a high-fat diet, and their body weights, body mass index (BMI) and blood cholesterol levels were measured. Serum, liver and kidney tissue samples were also extracted for PXR-CYP3A4-ABCB1-FXR signaling pathway research using PCR and UHPLC–MS. The obtained plasma samples were analyzed by UHPLC-Q-TOF-MS metabolomic investigation, which revealed PXR-CYP3A4-related metabolites and changes induced by YL. Finally, the key metabolites were chosen as index components, and their levels in the serum, liver, small intestine and bile were used for simultaneous UHPLC–MS-MS determination. The results indicated that YL was effective in rebalancing blood TG and TC levels (compared to controls). With respect to the PXR-CYP3A4-ABCB1 pathway, as a result of YL’s effect, gene expression or activity of the two targets decreased significantly in both the liver and kidney. The same trend was observed in the serum samples mentioned above. Metabolomics screening and data revealed that 44 metabolites can be regarded as biomarkers related to hyperlipidemia, fatty acids synthesis, and body energy consumption, as well as synthesis, transportation and exertion of cholesterol. YL’s treatment focused on 26 of them, primarily bile acids, indicating that the antihyperlipidemic effect of this drug lies in its inhibitory activity of cholesterol metabolism. Subsequent analysis of those in vivo components revealed that significant increases (compared to the model group) occurred in the blood, liver, small intestine and bile in groups that received medium and high doses of YL (while the low dose was relatively unchanged). Those target components exhibit a close relationship with PXR and/or CYP3A4. The use of YL repressed PXR expression and subsequently decreased CYP3A4 activity. As a result, synthesis of related bile acids increased, while cholesterol levels decreased, consequently leading to the attenuation of hyperlipidemia. This study comprehensively investigated the antihyperlipidemia mechanism of YL based on its repression of PXR-CYP3A4 activity and related metabolite yield, establishing an accurate method for evaluating the therapeutic effect of YL.     

双冠醚研究(Ⅳ)——Schiff碱型和仲胺型双-(苯并15冠-5)对碱金属苦味酸盐的萃取行为

仲胺型双冠醚与四苯硼酸碱金属盐在丙酮溶液中。25℃下的电导说明它们与Na~+可能形成1∶1络合物(冠醚单元∶金属离子),而与K~+、Rb~+、Cs~+离子则形成2∶1络合物。用Schlff碱型和仲胺型双-(苯并15-冠-5)在水-氯仿体系中进行萃取,测量了分配比D和萃取平衡常数K,发现后者的K值均大于前者。双冠醚F_2对K~+的萃取能力最强,选择性最佳。     

Synthesis of photoreactive polyimide having indan structure

Polyimide containing an indan unit and alkyl moiety with a high molecular weight was prepared from 5,7‐diamino‐1,1,4,6‐tetramethylindan and 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride. This polyimide was amorphous and soluble in common organic solvents, such as tetrahydrofuran, chloroform, and cyclopentanone. Thermogravimetry of the polyimide showed good thermal stability, indicating that a 10% weight loss of the polyimide was observed at 500 °C in nitrogen. The glass‐transition temperature of the polyimide was not observed by DSC measurement between room temperature and 400 °C at a heating rate of 10 °C/min (Apparatus: DSC3100 MAC Science Co., Ltd.). Transparency of the polyimide at 365 nm was 80%. The polyimide acted as a photosensitive resist of negative type by UV radiation. The resist had a sensitivity of 31 mJ/cm² and a contrast of 2.3 when it was developed with cyclopentanone at room temperature. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 423–428, 2002     

LiMg0.5Mn1.5O4的合成及对Li+的离子交换选择性

锂及其化合物在航空航天、化工、医药、空调、高能电池和热核反应等方面都有广泛应用，对锂及其化合物的需求与日俱增。我国液体锂资源非常丰富，开发利用其中的锂资源具有重要意义。从盐湖水、地下卤水、盐田母液、油气田水等咸水资源中提取锂的方法有碳酸盐沉淀法、离子交换法、萃取法等。离子     

Synthesis and Insulin—sensitizing Activity of a Series of 2—Benzyl—1,3—dicarbonyl Derivatives

A series of 2-benzyl-1,3-dicabonyl derivatives was synthesized.Their insulin-sensitizing activity was evaluated in 3T3-L1 preadipocyte cells.Compounds3,26 and 27 were found to possess strong insulin-sensitizing activity in vitro and were selected for further hypoglycemic evaluation in vivo.     

Stabilization ofEscherichia coli penicillin G acylase by polyethylene glycols against thermal inactivation

The effects of five polyethylene glycol (PEG) compounds of different molecular weight on the thermal stability of penicillin G acylase (PGA) obtained from a mutant ofEscherichia coli ATCC 11105 have been investigated. The molecular weights of PEG compounds were 400, 4000, 6000, 10,000, and 15,000. The thermal inactivation mechanisms of both native and PEG-containing PGA were considered to obey first order inactivation kinetics during prolonged heat treatments. Optimal concentrations of PEGs at molecular weights of 400,4000, 6000,10,000, and 15,000 were found to be 250,150,150,100, and 50 mM, respectively. The greatest enhancement of thermostability was observed with PEG 4000 and PEG 6000, as a nearly 20-fold increase above 50°C. PGA showed almost the same temperature activity profile and optimal temperature values both in the presence and absence of PEG. The addition of PEGs did not cause any change in the optimal temperature value of PGA, but the parametersV _m ,K _m , the activation energy, and thek _cat values of enzyme were markedly decreased because of the mixed inhibition by PEG compounds. The type of inhibition was found to be hyperbolic uncompetitive.     

基于微机械加工技术的双腔型生物传感器

利用微机械加工技术研制了具有三维结构的腔型传感器，双腔型工作电极与Ag/Agcl参比电极集成在同一微芯片上。考察了微腔型电极的电化学特性及其对H2O2含量的测定。并以此为基础电极制备了半乳糖、葡萄糖双腔型生物传感器。结果表明，该传感器可同时测定半乳糖、葡萄糖双组分，线性上限分别为4．5mmol/L和4．0mmol/L。而且在测试双组分过程中，没有观察到明显的交叉干扰现象。     

Reactivity of some “ladder” type complexes under conditions of metallation

The behavior of binuclear “ladder” type complexes FpL, where Fp=Cp(CO)₂Fe, L=p-MeC₆H₄Cr(CO)₃ (4), CH₂C₆H₅Cr(CO)₃ (5), andp-FpC₆H₄Cr(CO)₃ (6), under conditions of metallation was studied. Unlike compounds5 and6, the σ-bound ligand L in compound4 migrates from the iron atom to the cyclopentadienyl ring to give complexes Me(CO)₂FeC₅H₄−C₆H₄(p-Me)Cr(CO)₃. The electrochemical reduction potentials of the complexes4–6 and the rearrangement products were measured. The migration activity of L is determined by the ease of reductive cleavage of the Fe−L bond and the susceptibility of the system to undergo intramolecular electron transfer from the Cp ligand to the aromatic ring. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1832–1835, September, 1998.     

Mixed crystals in the system Cu2MnGexSn1−xS4: Phase analytical investigations and inspection of tetrahedra volumes

Cu₂MnGeS₄ crystallizes orthorhombic in a wurtzite superstructure type while Cu₂MnSnS₄ crystallizes in a tetragonal sphalerite superstructure type. Lattice constants and thermal analyses of the solid solution series Cu₂MnGe_xSn_1−xS₄ are presented. A two-phase region is found from Cu₂MnGe_0.3Sn_0.7S₄ to Cu₂MnGe_0.5Sn_0.5S₄. The cell volume of the mixed crystals increases with increasing Sn content. The melting points increase smoothly with increasing Ge content to x=0.5 and then steeply for higher Ge contents. The single crystal X-ray structure analysis of Cu₂MnGe_0.55Sn_0.45S₄ is presented. The refinement converges to R=0.0270 and wR₂=0.0586, Z is 2. The volumes of the tetrahedra [MS₄] (M=Cu, Mn, Ge, Sn) are calculated. From these volumes the differences in size of the tetrahedra are derived and compared with the corresponding differences in the end members of the solid solution series. It turns out that the resulting structure type in these materials depends on the volume differences of the constituting tetrahedra [MS₄].     

Highly hydrophobically modified polyelectrolytes: Field variables to control emulsion type

Highly hydrophobically modified (with n-dodecylamide chain) linear poly(acrylic acid)s (HHMPAAH) and poly(sodium acrylate)s (HHMPAANa) with various degrees of grafting (τ) were synthesized and used as emulsifiers of the n-dodecane/water system. The type of emulsion, oil in water (O/W) or water in oil (W/O), was investigated as a function of the polymer chemical structure (τ, salt or acid form of the copolymer) and aqueous phase electrolyte concentration (NaNO₃). Increasing τ and/or salt concentration was found to favor the formation of inverse emulsions. Direct liquid–liquid dispersions are more likely to form with poly(sodium acrylate)s than with poly(acrylic acid)s. Hence, field variables such as τ, pH and ionic strength are relevant parameters to control emulsion type. Moreover, a balanced polyelectrolyte neither soluble in oil nor in water was synthesized for the first time. With this original emulsifier, the dispersion type was found to change from O/W to W/O with polymer salting out. The work provides convenient model system for fundamental studies of polymer conformation at liquid–liquid interfaces. Received: 31 March 1998 Accepted: 30 April 1998