Practical capillary gas chromatography—a systematic approach

Capillary gc is now rapidly expanding. Naturally, initiation is most often attempted on the basis of the experience acquired with packed columns. However, such an extrapolation is successful only if a number of essential peculiarities of capillary gc are considered. Based on practical examples this paper discusses six essential details: 1) design and maintenance of the gas flow paths, 2) the greatly increased importance of sampling technique, which should not be confined just to stream splitting, 3) the problems in quantitative analysis arising from small sample size, 4) specific sources of trouble related to small amounts of liquid phase, 5) specific arguments for the choice of the carrier gas, clearly pointing to hydrogen as the ideal carrier and, 6) the different way to approach column production. Figures for all selected examples are given.     

非晶态Co-B的局域电子结构的Xα原子簇计算

In the research on metallic glass, there are arguments against the "rigid band charge transfer", model which assumes a charge transfer from metalloid atoms to transition metal atoms to explain the experimental evidence of linear reduction of average atomic magnetic moment with the increasing concentration of metalloid atoms, but they could not explain the experimental relation of the reduction. In the present work, spin-polarized SCC-DV-X_a calculation for atomic clusters for metallic glass Co-B has been empoloyed to investigate the local electronic structure and magnetic property of the metallic glass. As opposed to the "rigid band charge transfer" model, calculation in the present work indicates that charge transfers from Co4s to both B and Co3d. It is found that there is Co3d4s-B2p hybird bonding in Co-B, which leads to the linear reduction of average atomic magnetic moment. Thus the explanation removes the above controversy.     

Faster GC analyses performed by flow programming in short capillary columns

The technique of programming the carrier gas flow rate in gas chromatography, especially in connection with the use of capillary columns shorter than 10 m can significantly accelerate GC analyses. Equations for calculation of the parameters of the exponential flow function and retention data are described. The effects of flow programming in a short capillary column are shown in a few chromatograms. Different programming rates are tested and compared with temperature programming.     

Development of new glass composite membranes and their properties for low temperature H2/O2 fuel cells.

A new glass electrolyte formed by constant amounts of titanium oxide (TiO2) and various amount of phosphotungstic acid (PWA) doped P2O5-SiO2 is prepared using the sol-gel process. The structural formation is confirmed by Fourier infrared spectroscopy (FTIR) and from thermogravimetric and differential thermal analysis (TG/DTA) measurements, the glasses display good thermal stability. Further characterisation is undertaken by N2 adsorption/desorption measurements, proton conductivity and hydrogen permeability analyses and a H2/O2 fuel cell test is also performed. The glass materials with large pores and specific surface area are suitable for use as the electrolyte in H2/O2 fuel cells. The effect of TiO2 processing with constant amount of PWA in phosphosilicate glasses, is investigated and discussed. The hydrogen permeability is 1.57x10(-11) mol cm(-1) s(-1) Pa(-1) at 110 degrees C for 0.8 mm thick glass; a power density of 46.3 mW cm(-2) at 125 mA cm(-2) and a current density of 175 mA cm(-2) is obtained (T=28 degrees C, relative humidity).     

Thermal properties of fluoride glasses and their gel precursors

Xerogels were prepared from zirconium, barium, aluminum, lanthanum and lithium acetates, corresponding to a Li containing ZBLA composition. The study of their thermal properties (DSC, TG/DTG, FT-IR) showed that they might be used as chemically stable precursors in the preparation of fluoride glasses. Hydrofluoric acid in solution was chosen as a mild fluorinating agent. This newly proposed technique of fluorinating allowed to obtain high quality ZBLALi glass which presents the advantage of higher thermal stability and homogeneity in comparison with the glass obtained using individual commercial fluorides.This revised version was published online in November 2005 with corrections to the Cover Date.     

Practical limitations of capillary gas chromatography

Glass capillary gas chromatography is a high resolution separation method which allows the qualitative and quantitative analysis of even complex mixtures, which may contain many components–also isomeric–in a wide range of volatilities, polarities and concentrations. The principal limitation of gas chromatographic application is given by an insufficient volatility of the species to be separated. Elevated temperatures have to be applied if the application range is to be extended and to achieve steep peak profiles, i.e. low detection limits at high resolution. The use of elevated temperatures is limited, of course, by the temperature stability of both the solvent (stationary liquid and support) and the solutes. The problems of trace analysis for low volatility compounds at high resolution and its limitational parameters regarding sampling, separation and detection are discussed. The applicability of glass capillary columns in this field is influenced by the following parameters: tailing behaviour; irreversible adsorption of polar and decomposition of unstable solutes; thermal stability of stationary liquid (including the support deactivation); separation efficiency and sample capacity (film thickness). Multidimensional gas chromatography using capillary columns coupled either with a packed or another capilllary column for preseparations may be applied with advantage in the analysis of complex mixtures.     

Low dielectric thermoset. II. Synthesis and properties of novel 2,6‐dimethyl phenol–dipentene epoxy

A 2,6‐dimethyl phenol–dipentene adduct was synthesized from dipentene (DP) and 2,6‐dimethyl phenol, and then a 2,6‐dimethyl phenol–DP epoxy was synthesized from the reaction of the resultant 2,6‐dimethyl phenol–DP adduct and epichlorohydrin. The proposed structures were confirmed by Fourier transform infrared, elemental analysis, mass spectra, NMR spectra, and epoxy equivalent weight titration. The synthesized 2,6‐dimethyl phenol–DP adduct was cured with 4,4‐diamino diphenyl methane, phenol novolac, 4,4‐diamino diphenyl sulfone, and 4,4‐diamino diphenyl ether. The thermal properties of the cured epoxy resins were studied with differential scanning calorimetry, dynamic mechanical analysis, dielectric analysis, and thermogravimetric analysis. These data were compared with those for the bisphenol A epoxy system. The cured 2,6‐dimethyl phenol–DP epoxy exhibited a lower dielectric constant (ca. 3.1), a lower dissipation factor (ca. 0.065), a lower modulus, lower thermal stability (5% degradation temperature = 366–424 °C), and lower moisture absorption (1.21–2.18%) than the bisphenol A system but a higher glass‐transition temperature (ca. 173–222 °C) than that of bisphenol A system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4084–4097, 2002     

Synthesis and characterization of novel poly(vinyl chloride)‐based grafts: Poly(vinyl chloride‐co‐2‐chloropropene) fitted with multiple high‐glass‐transition‐temperature polyolefin branches

The tertiary chlorine (Cl^t) content of vinyl chloride/2‐chloropropene copolymers [P(VC‐co‐2CP)] was determined by NMR spectroscopy. Copolymers containing 6.8–47.0 Cl^t's per P(VC‐co‐2CP) chain were used to initiate the cationic grafting of α‐methylstyrene, norbornadiene, indene, and norbornene with Et₂AlCl under various conditions. Grafting was demonstrated by selective solvent extraction, and the effect of the experimental conditions on the grafting efficiency was examined. Select rheological and thermal characteristics of P(VC‐co‐2CP) grafts, including the glass‐transition temperature, heat deflection temperature, and discoloration upon heating, were studied. P(VC‐co‐2CP) carrying 7–11 poly(α‐methylstyrene) or polynorbornadiene branches per chain raised the glass‐transition temperature to, or above, that of a blend control. P(VC‐co‐2CP)s fitted with polyindene or polynorbornene branches were less effective in raising the mechanical properties. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3644–3651, 2002     

Study of the segmental dynamics in semi-crystalline poly(lactic acid) using mechanical spectroscopies

The glass transition of poly(L-lactic acid) (PLLA) occurs not far above typical service temperatures (room or body temperatures) which has consequences on the material properties during its use, such as damping or the occurrence of structural relaxation. This work aims at characterising the glass transition dynamics of a semi-crystalline PLLA using both dynamic mechanical analysis (DMA) and thermally stimulated recovery (TSR). The main viscoelastic parameters have been characterised at 1 Hz using DMA and the master curve obtained after isothermal experiments at different temperatures provided a full picture of the solid-state rheological behaviour throughout a wide frequency range. The activation energies calculated from the shift factors agree with the TSR ones, exhibiting a maximum near the T(g). Above the T(g), the results can be described with the WLF model. In the glassy state, the activation energy decreases with decreasing temperatures being always higher than the prediction of the Adam and Gibbs theory, at least down to temperatures 30 degrees C below the T(g). This suggests the existence of non-arrested degrees of freedom in the glassy state, being consistent with the existence of a significant degree of cooperativity in the TSR results.