Structural development of ultra‐high strength polyethylene fibers: Transformation from kebabs to shishs through hot‐drawing process of gel‐spun fibers

Structural development of ultra‐high strength polyethylene fibers via hot‐drawing processes of as‐spun gel fibers was investigated by means of transmission electron microscopy. It is found that the shish‐kebabs developed in both the as‐spun and drawn fibers can be transformed continuously into the micro‐fibril structure composed mostly of the shish structure through the hot‐drawing process. The structure transformation involves a drastic decrease in diameter of the kebab plus the shish but almost no change in the shish diameter. This result suggests that the chains in the kebabs are incorporated into the shishs and consumed to extend the longitudinal dimension of the shishs during the drawing process. The proposed new deformation model well explains the relationship between the fiber morphology and their mechanical properties: the tensile strength and modulus of the fibers can be determined by the number of the shish in the fiber and the macroscopic diameter of the fiber, which are apriori determined at the spinning process. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1861–1872, 2010     

Aligned and molecularly oriented semihollow ultrafine polymer fiber yarns by a facile method

In this work, aligned and molecularly oriented bone‐like PLLA semihollow fiber yarns were manufactured continuously from an optimized homogeneous polymer‐solvent‐nonsolvent system [PLLA, CH₂Cl₂, and dimethyl formamide (DMF)] by a single capillary electrospinning via self‐bundling technique. Here, it should be emphasized that the self‐bundling electrospinning technique, a very facile electrospinning technique with a grounded needle (which is to induce the self‐bundling of polymer nanofibers at the beginning of electrospinning process), is used for the alignment and molecular orientation of the polymer fiber, and the take‐up speed of the rotating drum for the electrospun fiber yarn collection is very low (0.5 m/s). PLLA can be dissolved in DMF and CH₂Cl₂ mixed solvent with different ratios. By varying the ratios of mixed solvent system, PLLA electrospun semihollow fiber with the porous inner structure and compact shell wall could be formed, the thickness of the shell and the size of inner pores could be adjusted. The results of polarized FTIR and wide angle X‐ray diffraction investigations verified that as‐prepared PLLA semihollow fiber yarns were well‐aligned and molecularly oriented. Both the formation mechanism of semihollow fibers with core‐shell structure and the orientation mechanism of polymer chains within the polymer fibers were all discussed. The as‐prepared self‐bundling electrospun PLLA fiber yarns possessed enhanced mechanical performance compared with the corresponding conventional electrospun PLLA fibrous nonwoven membranes. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1118–1125, 2010     

EFFECTS OF PROCESS CONDITIONS ON THE STRUCTURE AND PROPERTIES OF GEL-SPUN PVA FIBERS

Some noticeable effects of process conditions, such as coagulation bath, solvent extraction, drying shrinkage and ultra-drawing, on the structure and properties of gel-spun PVA fibers are studied and discussed. High strength and high modulus PVA fibers with tensile strength of 11.3 cN / dtex and initial modulus of 430 cN / dtex have been obtained.     

超喂率对空气变形纱的成纱结构、性能及其织物的影响

超喂率是影响空气变形纱(以下简称空变纱)及其织物结构性能的一个重要参数。本文就超喂率对空变纱的形态结构、光泽、强伸度、摩擦等性能以及对空变纱织物性能的影响进行了较全面的实验研究,给出了实测数据,并通过分析而引出了重要结论。     

Thermal analysis in industrial environments

Common industrial procedures often expose polymers to liquids and vapors which may affect their thermal properties. By carrying out thermoanalytical measurements under simulated process conditions, the scientist can investigate environmental effects on the properties of the material. Such experiments can also be used to demonstrate the nature of processes taking place. This work illustrates case studies regarding the application of thermogravimetry, thermomechanical, dynamic mechanical and dielectric measurements to monitor the behaviour of fibers, films and adhesives under such conditions.     

Synthesis of new amphiphilic and lypophilic polymer networks containing 2‐methyl‐ and 2‐nonyl‐2‐oxazoline by the macroinitiator method

New amphiphilic and lypophilic polymer networks were obtained by the copolymerization of 2‐methyl‐2‐oxazoline (MeOXA), and/or 2‐nonyl‐2‐oxazoline (NoOXA) and 2,2′‐tetramethylenebis(2‐oxazoline) (BisOXA), respectively, initiating the copolymerization by random copolymers of chloromethylstyrene and methyl methacrylate or of chloromethylstyrene and styrene (macroinitiator method). Potassium iodide was used as an activator agent and the reaction was carried out in benzonitrile at 110 °C. In general, the polymer gels were obtained with a yield of 62 to 88%. The networks were characterized by high‐resolution magic angle spinning (HRMAS) NMR spectroscopy and by its absorption of polar and nonpolar solvents. In the case of amphiphilic polymer networks, the absorption of solvents depends on the molar ratio of 2‐methyl‐ to 2‐nonyl‐2‐oxazoline inside the polymer network favoring the absorption of polar solvents with a higher content of 2‐methyl‐2‐oxazoline. These gels showed a maximal swelling degree of 13 mL of water, 20 mL of methanol, and 13 mL of chloroform, respectively, per g of polymer. The lypophilic polymer networks containing only 2‐nonyl‐2‐oxazoline showed a maximal swelling degree of 8 mL of toluene, 14 mL of chloroform, and 2 mL of methanol, respectively, per g of the lypophilic network. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 122–128, 2005     

Structure transfer from a polymeric melt to the solid state. Part I: The influence of chain entanglements in linear polyethylene

Melt-spinning experiments were carried out at high quenching rates. Mechanical properties (elongation at break, natural draw ratio, and elastic recovery) have been measured. Significant variations of these quantities were observed when extrusion conditions were changed. This has been attributed to different states of the entanglements within the melt, which are directly transferred into the solid state. This intercorrelation between melt and solid-state properties has been substantiated in the case of rapidly cooled samples, where a poor crystallization on one side and a simultaneous good conservation of melt history on the other side are provoked.     

TF18—230型弹簧摇架加压机构的工艺性能探讨

本文测试了 TF18-230型弹簧摇架加压机构的三直线平行度,前胶辊的自调能力,加压力的大小,较全面地探讨了加压机构性能与成纱质量的关系。     

Determining the geometry of hydrogen bonds in solids with picometer accuracy by quantum-chemical calculations and NMR spectroscopy.

The structure of multiply hydrogen-bonded systems is determined with picometer accuracy by a combined solid-state NMR and quantum-chemical approach. On the experimental side, advanced 1H-15N dipolar recoupling NMR techniques are capable of providing proton-nitrogen distances of up to about 250 pm with an accuracy level of +/-1 pm for short distances (i.e., around 100 pm) and +/-5 pm for longer ones (i.e., 180 to 250 pm). The experiments were performed under fast magic-angle spinning, which ensures sufficient dipolar decoupling and spectral resolution of the 1H resonance lines. On the quantum-chemical side, the structures of the hydrogen-bonded systems were computationally optimised, yielding complete sets of nitrogen-proton and proton-proton distances, which are essential for correctly interpreting the experimental NMR data. In this way, nitrogen-proton distances were determined with picometer accuracy, so that vibrational averaging effects on dipole-dipole couplings need to be considered. The obtained structures were finally confirmed by the complete agreement of computed and experimental 'H and '5N chemical shifts. This demonstrates that solid-state NMR and quantum-chemical methods ideally complement each other and, in a combined manner, represent a powerful approach for reliable, high-precision structure determination whenever scattering techniques are inapplicable.     

精纺毛型织物中纱线表观直径探讨

讨论了精纺毛型织物中纱线表观直径3种分布状态，将织物分为两大类，分析经纬纱交织点处和孔隙处表观直径之间与理论直径之间的关系；给出了表观直径与织物结构参数间的关系；利用多元统计分析方法建立了表观直径与织物结构参数之间的关系方程，验证结果表明：除纬向化纤长丝对方程有较大的误差平均误差率大于23％之外，方程对其范围内的织物平均误差控制在10%以内。