基于改进极根学习机的回转窑煅烧带温度预测方法

针对传统算法预测回转窑煅烧带温度存在精度低、速度慢的问题,提出了基于改进极限学习机(ELM)的回转窑煅烧带温度预测方法。对ELM输入权值矩阵定义了变换系数,采用黄金分割法在给定区间内搜寻变换系数的最佳值,改进了ELM网络参数的确定方式,弥补了随机确定输入权值并且不作调整的缺陷,在保证ELM训练速度的前提下提高预测精度、减小模型随机性。实验结果表明,改进的ELM预测精度高、训练速度快、模型性能优,可满足工况恶劣的回转窑的生产需要。     

大型砂尘风洞中砂尘浓度测量与控制方法的研究

砂尘浓度指标严重影响砂尘风洞试验效果;在大型砂尘风洞中准确的测量及有效的控制砂尘浓度是砂尘风洞设备研制中的两个关键问题;针对动态试验工况环境中浓度传感器标定的问题,分析了浓度测量时标定参数与风速和浓度的关系,使用模型树算法建立了三者之间的关系模型,以此模型来预测各种动态情况下的标定参数;针对复杂环境下浓度动态控制问题,采用专家PID算法,提出了多回路控制系统结构和专家规则;工程实践表明该测量和控制方法满足了动态试验环境的需求,取得了良好效果;模型树算法和专家PID系统能有效的解决动态工况下砂尘浓度的测量与控制问题。     

求解粘弹性饱和土隧道频域响应的DQEM

用微分求积单元法研究了粘弹性饱和土隧道的频域响应问题.首先,基于饱和多孔介质混合物理论,分别建立了频域内隧道耦合系统中粘弹性饱和土和粘弹性衬砌的控制方程,给出了耦合系统的边界条件以及饱和土和衬砌连接面上满足的连接条件.其次,发展了求解该耦合系统的微分求积单元法,利用微分求积单元法,在频率域内对耦合系统的数学模型进行了离散,并利用Newton-Raphson迭代法得到了系统的数值解.最后,对耦合系统的频域响应进行了分析,考察了参数的影响,同时也验证了数值方法的有效性.     

Study on the nanoscale current of ZnO film by photoassisted peak force tunnel atomic force: A novel technique for UV detection

ZnO film-based ultraviolet (UV) detector was fabricated by photoassisted peak force tunnel atomic force (PFTUNA) on fluorine tin oxide (FTO) substrate. The PFTUNA current in dark and in UV light was ~0.1 and 2.0 nA, respectively. The UV sensitivity (photocurrent/dark current) is more than 20. The response time and the recovery time are ~0.12 and 0.32 s, respectively. The UV sensing mechanism is that the holes will transport to the ZnO surface to capture the adsorbed oxygen ions to weaken the depletion layer under UV illumination. The PFTUNA current between the tip and the ZnO film is consistent with the Richardson–Schottky (RS) thermionic emission model.     

Research on application of polynomial fitting technique in rotary kiln infrared temperature measurement system

Aiming at the linear temperature compensation algorithm’s disadvantage of temperature measurement error in rotary kiln infrared scanning temperature measurement process, this paper proposes a precise nonlinear cubic polynomial fitting temperature compensation algorithm. The proposed algorithm compensates the temperature values of scanning points on rotary kiln surface by following steps: Calculating temperature difference between the real temperature value of rotary kiln and temperature value measured by infrared scanning temperature measurement system; Fitting the temperature difference data with cubic polynomial; Using the obtained function to compensate temperature. Experimental result shows that compared with the usual linear temperature compensation algorithm, the accuracy of proposed algorithm has raised about 2.25 times when cubic polynomial is used.     

基于CDMA 1X VPDN的银联无线POS系统应用

CDMA 1X VPDN技术是一种新型通信技术,它利用CDMA 1X的无线接入,为企业客户提供了一种企业VPDN解决方案.文章介绍了CDMA 1X VPDN核心技术(包括隧道技术、VPDN的安全性协议等),阐述了该技术的结构与原理,分析了CDMA 1X网络无线侧安全性,最后详细介绍了银联无线POS VPDN的实际应用及其优点.     

高地应力区深埋隧道三维应力场数值模拟

结合高地应力区某深埋隧道工程,通过三维弹塑性有限元数值模拟,分析隧道掌子面推进过程中的围岩空间应力场状态和演化趋势.结果表明:当掌子面接近和通过某一断面时,围岩主应力大小和方向发生相应的变化.隧道开挖对平面σx、σy的主要影响范围约为0.5B,对围岩空间主应力和剪应力的影响范围约1.0B,对围岩位移和屈服接近度的影响范围分别为2.0B和1.0B.对高地应力区深埋隧道围岩稳定性分析、确定合理的支护措施以及制定合理的开挖方案具有重要的意义.     

格栅尾翼(舵)外形参数对气动特性的影响

为研究格栅尾翼/舵主要几何参数--格数、格壁厚度、格壁前缘倒角对其气动特性的影响,在翼高、翼宽、弦长一定的条件下,设计了一组具有不同格数、格壁厚度和格壁前缘倒角的格栅尾翼模型,进行了风洞测力实验,得到了格数、格壁厚度、格壁前缘倒角对气动特性影响的基本规律.基于对实验结果的分析,提出了适于滑翔增程制导武器采用的格栅尾翼气动外形参数的选择方法及对结构设计和材料的要求.     

环氧灌浆材料在莞惠城际轨道工程GZH-5标渗漏水治理中的应用

针对当前聚氨酯灌浆材料在渗漏水治理中存在的问题,提出了依靠堵水环氧灌浆材料和高渗透环氧灌浆材料进行渗漏水治理的新思路。环氧类灌浆材料既能够对混凝土裂缝等缺陷进行修复,也能够封堵渗漏水,希望修复后的缺陷能够保持和恢复混凝土结构的耐久性。     

Charge Transfer and Metastable Ion Dissociation of Multiply Charged Molecular Cations Observed by Using Reflectron Time-of-Flight Mass Spectrometry

A multiply charged molecule expands the range of a mass window and is utilized as a precursor to provide rich sequence coverage; however, reflectron time-of-flight mass spectrometer has not been well applied to the product ion analysis of multiply charged precursor ions. Here, we demonstrate that the range of the mass-to-charge ratio of measurable product ions is limited in the cases of multiply charged precursor ions. We choose C₆F₆ as a model molecule to investigate the reactions of multiply charged molecular cations formed in intense femtosecond laser fields. Measurements of the time-of-flight spectrum of C₆F₆ by changing the potential applied to the reflectron, combined with simulation of the ion trajectory, can identify the species detected behind the reflectron as the neutral species and/or ions formed by the collisional charge transfer. Moreover, the metastable ion dissociations of doubly and triply charged C₆F₆ are identified. The detection of product ions in this manner can diminish interference by the precursor ion. Moreover, it does not need precursor ion separation before product ion analysis. These advantages would expand the capability of mass spectrometry to obtain information about metastable ion dissociation of multiply charged species.