微波消解-磷钼蓝分光光度法测定钨矿石中的磷含量

针对钨矿石中的微量元素磷,采用混合酸快速微波消解结合磷钼蓝分光光度法进行测定。经选择优化样品的微波消解和实验测定条件,结果表明:HCl+HNO3+HF的混合酸微波消解后的样品,在硫酸介质中,有钼酸铵存在时,用抗坏血酸将磷还原成磷钼蓝络合物,在825nm处比色测定。方法的加标回收率为98.9%~101.6%,结果准确可靠。硅在熔样过程中挥发除去不会干扰测定,砷会干扰实验,可在酸介质中加入碘化钾,使砷还原至低价而不干扰磷的测定。     

Small‐Sized Tungsten Nitride Particles Strongly Anchored on Carbon Nanotubes and their Use as Supports for Pt for Methanol Electro‐oxidation

The anchoring of small‐sized WN (tungsten nitride) nanoparticles (NPs) with good dispersion on carbon nanotubes (CNTs) offers an effective means of obtaining promising materials for use in electrocatalysis. Herein, an effective method based on grinding treatment followed by a nitridation process is proposed to realize this goal. In the synthesis, a solution containing H₄[SiO₄(W₃O₉)₄] (SiW₁₂) and CNTs modified with polyethylenimine (PEI‐CNTs) was ground to dryness. Small‐sized WN NPs were anchored onto the CNTs with good dispersion after calcination under NH₃. Under hydrothermal assembly conditions (absence of grinding), WN particles of larger size and with inferior dispersion were obtained, demonstrating the important role of the grinding process. The benefit of the small‐sized WN has been demonstrated by using WN/CNTs as a support for Pt to catalyze the methanol electro‐oxidation reaction. The mass activity of Pt‐WN/CNTs‐G‐70 (where G denotes the grinding treatment, and 70 is the loading amount (%) of WN in the WN/CNTs) was evaluated as about 817 mA mg^?1_Pt, better that those of commercial Pt/C (340 mA mg^?1_Pt) and Pt/CNTs (162 mA mg^?1_Pt). The Pt‐WN/CNTs‐G also displayed good CO tolerance. In contrast, Pt‐WN/CNTs prepared without the grinding process displayed an activity of 344 mA mg^?1_Pt, verifying the key role of grinding treatment in the preparation of WN/CNTs with good co‐catalytic effect.     

微波消解-ICP-OES法测定哈氏C-276合金中Cr、Fe、Mo、W元素

建立了微波消解-电感耦合等离子体发射光谱法同时测定哈氏C-276合金中Cr、Fe、Mo、W元素含量的分析方法.采用10 m L HCl-HNO3-HF(体积比为10:1:1)混合酸溶解试样.研究了合金不同溶解方式、元素谱线的选择、背景校正等试验条件,并对仪器分析参数进行了优化,确定了最佳的试验条件,各元素分析谱线依次为Cr2 67.716 nm、Fe 238.204 nm、Mo 202.031 nm、W 209.712 nm,建立的校准曲线各元素相关系数均在0.999 5以上.实际样品分析中,加标回收率为97.8%~102.7%,重复测定结果的相对标准偏差小于1.64%(n=6),试验测定结果与镍基标准样品标准值做对照,结果表明方法准确、快速,能够满足日常生产的检测要求.     

One‐step electrodeposition of amorphous carbon films containing WO3 with high conductivity and good wettability

Tungsten trioxide‐incorporated hydrogenated amorphous carbon (WO₃/a‐C:H) films have been fabricated on a single‐crystal silicon wafer by liquid phase electrodeposition using methanol as carbon source and tungsten carbonyl as incorporated reagent. The morphology, composition and structure of the films have been investigated by SEM, XPS, Raman scattering spectroscopy, Fourier transform infrared spectroscopy (FTIR) and Transmission electron microscope (TEM), respectively. The effects of WO₃ incorporation on the electrical and wetting properties were studied in detail. The characterization results showed that tungsten trioxide nanocrystalline particles with diameters in the range of 10–20 nm were homogenously embedded in the amorphous carbon films. Also, the electrical conductivity and wetting ability of the films were strongly improved due to the contribution of the tungsten trioxide. Copyright © 2010 John Wiley & Sons, Ltd.     

Reactivity of bis(pyrazol-1-yl)methanes functionalized by 2-hydroxyphenyl and 2-methoxyphenyl on the methine carbon atom with W(CO)5THF

Reactions of 2-hydroxyphenyl and 2-methoxyphenylbis(pyrazol-1-yl)methanes as well as 2-hydroxyphenyl and 2-methoxyphenylbis(3,5-dimethylpyrazol-1-yl)methanes with W(CO)₅THF have been carried out. Heating 2-hydroxyphenylbis(pyrazol-1-yl)methane (L¹) with W(CO)₅THF in THF at reflux yielded complex (L¹)W(CO)₄.L¹, while similar reaction of 2-hydroxyphenylbis(3,5-dimethylpyrazol-1-yl)methane (L²) with W(CO)₅THF resulted in the cleavage of a C_sp3-N bond to generate 1,2-bis(2-hydroxyphenyl)-1,2-bis(3,5-dimethylpyrazol-1-yl)ethane (L) and pyrazole derivative W(CO)₅(3,5-Me₂PzH) (Pz = pyrazol-1-yl). These two fragments were connected together through strong O…H-N and O-H…N hydrogen bonds to form complex L.[W(CO)₅(3,5-Me₂PzH)]₂. The analogous results were observed in the treatment of 2-methoxyphenylbis(pyrazol-1-yl)methane (L³) with W(CO)₅THF, which gave product L′.[W(CO)₅(PzH)]₂ (L′ = 1,2-bis(2-methoxyphenyl)-1,2-bis(pyrazol-1-yl)ethane) as well as certain amount of complex (L³)W(CO)₄. In addition, during the reaction of 2-methoxyphenylbis(3,5-dimethylpyrazol-1-yl)methane (L⁴) with W(CO)₅THF, partial decomposition reactions took place to yield complexes (L⁴)W(CO)₄ and W(CO)₅(3,5-Me₂PzH), but no hydrogen bond was found between these two moieties.     

含镍WP/MCM-41催化剂二苯并噻吩加氢脱硫性能

以MCM-41为载体,以镍（Ni）为助剂,制备了Ni含量不同的WP/MCM-41催化剂。采用XRD、BET、SEM和XPS对催化剂进行了表征;以二苯并噻吩（DBT）为模型化合物,通过高压微反装置考察催化剂的加氢脱硫（HDS）活性。结果表明,Ni的加入促进了活性组分WP的生长并使其晶相尺寸略有增加,一定含量的Ni有利于提高催化剂的比表面积。Ni对WP/MCM-41催化剂二苯并噻吩HDS反应具有促进作用。少量Ni的加入有利于WP活性相的生成并增加了活性位的数量;加入过量的Ni,在催化剂中形成了具有一定活性的类似Ni-W-P结构的物种,减少了活性组分WP所占的比例,从而使催化剂DBT的 HDS活性降低。其中,Ni的质量分数为1%的催化剂（cat-Ni-1）具有相对较高活性,其DBT 脱硫率和转化率分别为76.78%和72.16%,比不加Ni的催化剂分别提高了30.04%和21.62%。二苯并噻吩在WP/MCM-41催化剂上以加氢脱硫途径为主,Ni的加入对提高加氢脱硫途径选择性起到了促进作用,且加氢脱硫选择性随Ni含量的增加而提高。     

多级孔WO3/ZrO2固体酸催化剂的制备与表征

采用复合模板表面活性剂辅助水热法一步合成了WO3/ZrO2多级孔固体酸催化剂,并应用X射线衍射、低温N2吸附-脱附、拉曼光谱及NH3程序升温脱附对催化剂进行了表征.结果表明,WO3的引入使得WO3/ZrO2催化剂的比表面积增大,表面的酸中心明显增加.在乙酸和正丁醇的酯化反应中,WO3/ZrO2多级孔固体酸催化剂表现出较...