Pressure‐Induced Structural Transition in WO3 Nanowires

Raman spectroscopic analysis is performed on WO₃ nanowires at room temperature at pressures from ambient conditions to 45 GPa. Linear dependence of the first‐order Raman signal on various high‐pressure (HP) sections is observed. Upon increasing the applied pressure, the WO₃ nanowires undergo four phase transitions at pressures around 1.7, 4.6, 21.5, and 26.2 GPa, which are all less than that reported for bulk WO₃. When the pressure is up to 42.5 GPa, a new high‐pressure phase (HP5) appears. This phase has never been reported and is not reversible while unloading the pressure.     

Decomposition of 1,1‐dimethyl‐1‐silacyclobutane on a tungsten filament—evidence of both ring C?C and ring Si?C bond cleavages

The decomposition of 1,1‐dimethyl‐1‐silacyclobutane (DMSCB) on a heated tungsten filament has been studied using vacuum ultraviolet laser single photon ionization time‐of‐flight mass spectrometry. It is found that the decomposition of DMSCB on the W filament to form ethene and 1,1‐dimethylsilene is a catalytic process. In addition, two other decomposition channels exist to produce methyl radicals via the Si? CH₃ bond cleavage and to form propene (or cyclopropane)/dimethylsilylene. It has been demonstrated that both the formation of ethene and that of propene are stepwise processes initiated by the cleavage of a ring C? C bond and a ring Si? C bond, respectively, to form diradical intermediates, followed by the breaking of the remaining central bonds in the diradicals. The formation of ethene via an initial cleavage of a ring C? C bond is dominant over that of propene via an initial cleavage of a ring Si? C bond. When the collision‐free condition is voided, secondary reactions in the gas‐phase produce various methyl‐substituted 1,3‐disilacyclobutane molecules. The dominant of all is found to be 1,1,3,3‐tetramethyl‐1,3‐disilacyclobutane originated from the dimerization of 1,1‐dimethylsilene. Copyright © 2010 John Wiley & Sons, Ltd.     

Towards the Accurate Calculation of 183W NMR Chemical Shifts in Polyoxometalates: The Relevance of the Structure

DFT calculations were carried out to study ¹⁸³W NMR chemical shifts in the family of the Keggin anions with formula α‐[XW₁₂O₄₀]^q? (X=B, Al, Si, P, Ga, Ge, As, Zn), in the β‐ and γ‐[SiW₁₂O₄₀]^4? geometric isomers, in the derivative Dawson anion [P₂W₁₈O₆₂]^6?, and in the most symmetrical Lindqvist [W₆O₁₉]^2? anion and its derivative [W₁₀O₃₂]^4?. In this article, we show that the geometry employed in the calculation of NMR chemical shifts in polyoxotungstates is extremely important if we want to be quantitative. Using very large basis sets of QZ4P quality and taking into account the conductor‐like screening model (COSMO) to account for solvent effects (aqueous and organic solutions), good geometries were found for the polyoxoanions. From these optimal geometries the ¹⁸³W NMR chemical shifts were computed with the more standard basis sets of TZP quality and including spin–orbit corrections inside the zero‐order regular approximation (ZORA) to describe the relativistic effects of the internal electrons. With this strategy the mean absolute error between experimental and theoretical values was found to be less than 10 ppm, which is similar to the experimental error. We also discuss how the geometry of the polyoxoanion influences on the shielding.     

碳化物修饰的有序介孔炭的制备及其催化肼分解性能

 以间苯二酚和甲醛为炭源, F127 (EO₁₀₆PO₇₀EO₁₀₆) 为结构导向剂, 在酸性水/乙醇溶液中引入 (NH₄)₆Mo₇O₂₄•4H₂O 或 (NH₄)₂WO₄ 溶液, 经静置自组装形成凝胶, 再于 N₂ 中焙烧即合成出金属碳化物修饰的有序介孔炭材料. 结果表明, 金属离子的种类和用量对碳化物的分散度和介孔炭的有序度影响很大. 通过控制金属离子的用量可制备出粒径为 3~5 nm 且高度分散在介孔炭骨架中的碳化物粒子. 与分步浸渍法相比, 一步法制备的碳化物具有更高的分散度和催化肼分解活性.     

In situ measurements of the spectral emittance of coal ash deposits

The spectral emittance of deposits left by bituminous and sub-bituminous coals under oxidizing conditions have been measured in situ. Pulverized coal is injected into a down-fired entrained-flow reactor. Ash accumulates on a probe in the reactor effluent and radiation emitted by the ash layer is recorded using a Fourier transform infrared (FTIR) spectrometer. Values for the spectral emissive power emitted by the ash and the surface temperature of the ash are extracted from these data. These results are then used to calculate the spectral emittance of the deposit. The spectral emittances of ash deposits formed by burning Illinois #6 (bituminous) coal and Powder River Basin (sub-bituminous) coal were measured between 3000 and 500 wavenumbers. The spectral emittance of the deposit left by the bituminous coal has a constant value of approximately 0.46 between 3000 and 2400 wavenumbers. Between 2200 and 1200 wavenumbers, the spectral emittance of the deposit increases from approximately 0.47 to approximately 0.61. Between 1200 and 500 wavenumbers, the spectral emittance is relatively constant at 0.61. The spectral emittance of the deposit left by the sub-bituminous coal is also relatively constant between 3000 and 2400 wavenumbers at a value of 0.29. Between 2200 and 500 wavenumbers, the spectral emittance of deposits from the sub-bituminous coal increases from approximately 0.29 to 0.55. Differences between these spectral emittance measurements and those measured ex situ illustrate the importance of making in situ measurements. Band emittances were calculated using the measured spectral emittances, and band emittances of the deposits are reported as functions of temperature.     

基于溴钨灯和LED积分球光源的可调谐光谱分布及光谱匹配

采用溴钨灯和恒流驱动的LED混合作为积分球内部光源,提出了模拟退火算法作为光谱匹配算法,研究了光谱分布可调谐积分球光源的光谱匹配技术.仿真实验表明,该混合光源完全能够定量地模拟CIE-D65和等能光谱分布,且在辐射功率优于LED模拟结果的前提下,LED的数量分别减少79.8％和82.9％,平均相对误差分别减小10％和4...     

富营养化湖泊中铜锈环棱螺分解对钨迁移影响

以富营养化的太湖梅梁湾为研究对象,利用平面光极、高分辨率平衡式间隙水采样(HR-Peeper)装置和薄膜扩散梯度(DGT)技术获取沉积物水界面溶解氧(DO)二维平面和溶解态/生物有效态钨(W)一维垂向分布信息,分析铜锈环棱螺分解对太湖底泥中钨迁移的影响效应。试验结果表明:铜锈环棱螺死亡分解后会迅速降低沉积物水界面DO浓度,形成厌氧环境,引起间隙水及上覆水中溶解态钨质量浓度的增加,溶解态钨平均质量浓度增加幅度是对照组的28.92%～11446%,显著提升了沉积物水界面钨的生物有效性(DGT所测结果);与钨质量浓度变化类似,铜锈环棱螺分解前期(第8天)沉积物间隙水中铁、锰质量浓度同步增加且与钨浓度变化呈显著正相关(R2≥0.716,p<0.01)关系,水相中溶解态钨质量浓度增加是由厌氧环境下沉积物中铁锰氧化物还原溶解所致,分解后期(第16天和36天)间隙水中钨质量浓度的增加主要是由于铜锈环棱螺体内累积的钨释放所致。     

Porous WO3 from anodized sputtered tungsten thin films for NO2 detection

In this paper, porous WO₃ films were prepared by anodic oxidation of metallic tungsten (W) films deposited on alumina substrates. The structural and morphological properties of the porous WO₃ films were investigated using field emission scanning electron microscope (FESEM) and X-ray diffraction (XRD). A large number of cracks appeared on the surface of films after anodization, which makes the films porous. The porous WO₃ sensors achieved their maximum response values to NO₂ at a low operating temperature of 150 °C. The porous WO₃ sensors showed high response values, great stability and fast response-recovery characteristics to different concentration of NO₂ gas due to the high specific surface area and special structural and morphological properties.