LDPC编码的MIMO-OFDM系统的双涡轮迭代检测译码方法

采用迭代检测译码接收方法的LDPC(low density parity check,低密度奇偶校验)编码MIMO-OFDM(multiple-input multiple-output orthogonal frequency division multiplexing,多天线正交频分复用)传输,是在宽带无线通信系统中逼近多输入多输出(MIMO)信道容量的一种简单而有效的方法.在迭代检测译码过程中,既存在检测器和译码器之间的迭代,也存在译码器内迭代.首先给出LDPC编码MIMO-OFDM系统的因子图分析,进而提出双涡轮迭代检测译码方法.在所提方法中,检测器与译码器并发工作且实时交互软信息.与传统的串行迭代检测译码方法相比,双涡轮迭代检测译码方法可有效地降低检测译码时延.仿真结果证实,采用双涡轮迭代检测译码方法的接收机能在给定运算复杂度的条件下改善误帧率性能,有助于实现"绿色通信".     

客观文本与主观解读--比较法兰克福学派的文化批评理论和后继的大众文化研究

法兰克福学派就大众文化提出了系统的批判理论 ,后继的大众文化研究产生了一些跟法兰克福学派批判理论相左的观点 ,本文通过对二者之间分歧之处的阐述与比较 ,肯定了后继者对接受过程的主观能动作用的发掘 ,但也指出其局限性 ,并对法兰克福学派批判理论以经济基础、生产机制为依据的深刻分析予以肯定和赞扬     

利用硬盘特性对软件加密、解密

提出了2种利用硬盘特性设计加密／解密软件的方法；通过在电子海图系统和模拟器上的应用，证明了方法的有效性；这种软件加密方法特点是实现简单、隐蔽性好，成本低。     

Multiple decoding for polar-coded chase combining HARQ

The polar-coded hybrid automatic repeat request (HARQ) scheme with chase combining (CC) has very low complexity and is easy to combine with other techniques such as the coded-modulation and space–time coding, etc. However, the CC-HARQ scheme usually suffers from error and throughput performance degradation. A multiple decoding CC-HARQ (MDCC-HARQ) scheme is proposed in this paper by providing extra decoding chances when the joint decoding fails. Specifically, new LLR-sequences are constructed from the received signals, which can be utilized for the extra decoding attempts. Simulation results show that the proposed MDCC-HARQ scheme can achieve better error-performance and higher throughput efficiency, while requires less retransmission when compared with the CC-HARQ scheme.     

DIR-Net: Deep Residual Polar Decoding Network Based on Information Refinement

Polar codes are closer to the Shannon limit with lower complexity in coding and decoding. As traditional decoding techniques suffer from high latency and low throughput, with the development of deep learning technology, some deep learning-based decoding methods have been proposed to solve these problems. Usually, the deep neural network is treated as a black box and learns to map the polar codes with noise to the original information code directly. In fact, it is difficult for the network to distinguish between valid and interfering information, which leads to limited BER performance. In this paper, a deep residual network based on information refinement (DIR-NET) is proposed for decoding polar-coded short packets. The proposed method works to fully distinguish the effective and interference information in the codewords, thus obtaining a lower bit error rate. To achieve this goal, we design a two-stage decoding network, including a denoising subnetwork and decoding subnetwork. This structure can further improve the accuracy of the decoding method. Furthermore, we construct the whole network solely on the basis of the attention mechanism. It has a stronger information extraction ability than the traditional neural network structure. Benefiting from cascaded attention modules, information can be filtered and refined step-by-step, thus obtaining a low bit error rate. The simulation results show that DIR-Net outperforms existing decoding methods in terms of BER performance under both AWGN channels and flat fading channels.     

空间层叠矩形阵列式角多路解码光路设计

根据角多路技术原理,提出了一种矩形阵列空间层叠形式的解码光路结构和先分组解码再组内解码的两步解码方式,并针对本实验室的高功率准分子激光系统给出了具体的解码光路设计实例。该方法具有解码精度高,设计误差小,与光路准直、激光参数测量系统等兼容性好,便于加工制作和安装调试等优点。     

千兆以太网1000BASE-T收发器物理编码子层系统及芯片设计

提出了一种优化而可行的系统结构,并以硬件实现了千兆以太网物理编码子层.该系统主要电路模块包括:递归式系统卷积码和网格编码器,以达到约6 dB的编码增益;优化的逻辑电路,以实现符号映射,替代了约6 KB的ROM;并行搜索阵列电路,以实现物理编码子层的训练.仿真及FPGA验证结果表明,该系统的关键路径时延小于7 ns,符合802.3标准.     

一种低解码复杂度的全分集全码率空时编码

针对Beyond 3G MIMO系统下行链路中发射天线数大于接收天线数的特点,通过构造码字结构,根据编码增益的表达式,得到具有高编码增益的参数,提出了一种适合于4根发射天线、具有低解码复杂度的全分集全码率空时编码方法.该方法具有编码增益高、误码性能好和解码复杂度低等优点.仿真结果表明,与传统的空时编码方案,如酉空时码、空时分组编码和全分集全码率空时编码方法相比,新编码方法具有很好的误码性能,同时具有很低的解码复杂度.     

数据选择和译码显示的实验设计

数据选择器和译码器是数字集成电路中应用较多的器件之一，该文通过具体电路分析了利用数据选择器、显示译码器、变量译码器和计数器等器件构成的数据选择分时传输组成动态译码显示电路，阐述了所述电路在实验教学中所能达到的目的。     

一类带Gauss白噪声的随机信号传递系统的优化建模与系统分析

运用随机控制理论与方法 ,提出并研究了一类带Gauss白噪声的随机信号传递系统的数学建模与优化问题 .对在这类信号下的可容许编码函数与译码函数进行了最佳运算与优化分析 ,得到了该状态下的两个最佳控制数学模型 ;给出了此类随机信号传递系统的最佳编码与最佳译码的建立方法 ,为进一步提高该类信号传递系统的效率提供了一种理想的数学处理方法