优化铅酸蓄电池化成工艺参数的研究

本文针对生极板为同一型号的电池，采用二次加酸化成，改变电流密度和时间．控制电解液的温度等方法．得到优化的工艺参数。采用该组工艺参数，不仅缩短铅酸蓄电池化成周期．提高生产效率，而且节约能源。     

Independence of the brittle–ductile transition from the rubber particle size for impact‐modified poly(vinyl chloride)

A series of acrylic impact modifiers (AIMs) with different particle sizes ranging from 55.2 to 927.0 nm were synthesized by seeded emulsion polymerization, and the effect of the particle size on the brittle–ductile transition of impact‐modified poly(vinyl chloride) (PVC) was investigated. For each AIM, a series of PVC/AIM blends with compositions of 6, 8, 10, 12, and 15 phr AIM in 100 phr PVC were prepared, and the Izod impact strengths of these blends were tested at 23 °C. For AIMs with particle sizes of 55.2, 59.8, 125.2, 243.2, and 341.1 nm, the blends fractured in the brittle mode when the concentration of AIM was lower than 10 phr, whereas the blends showed ductile fracture when the AIM concentration reached 10 phr. It was concluded that the brittle–ductile transition of the PVC/AIM blends was independent of the particle size in the range of 55.2–341.1 nm. When the particle size was greater than 341.1 nm, however, the brittle–ductile transition shifted to a higher AIM concentration with an increase in the particle size. Furthermore, the critical interparticle distance was found not to be the criterion of the brittle–ductile transition for the PVC/AIM blends. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 696–702, 2006     

G-X5CrNi13.4不锈钢水斗现场检测方法

针对国内水头最高的水电站——西藏羊卓雍湖抽水蓄能电站4^#机水斗断裂事故，开展了在役机组水斗检测方法的研究，对照各种检测方法的差异，找出了最为有效的检测手段。     

试论外币报表折算方法的选择

作为当今国际会计领域公认的三大难题之一，随着经济全球化的迅猛发展，外币报表折算方法的选择显得越来越重要，这也成为了目前会计理论界和实务界一直探讨的焦点之一。在时态法和现行汇率法的争议中，现行汇率法暂时占据上风，也成为我国企业外币报表折算方法的现行选择。     

磁粉制动器的滑差功率研究

首先用理论方法对经过结构优化的磁粉制动器的滑差功率进行了计算，然后在自行设计、安装的实验台上对其进行了温升实验，所得理论计算值和实测值的一致性较好，在此基础上确定了它的额定滑差功率线图。     

能耗率极值原理和重力理论交互作用下粗质颗粒的浓度垂线分布

本文同时运用能耗率极值原理和重力理论研究了固液两相流在粗质颗粒时固相浓度的垂线分布,通过探讨能耗率极值原理对“非单向性”作用问题,进一步揭示了两相流运动的机理。计算结果与实测数据有较好的吻合。其研究方法、原理、步骤也极易推广到其它各种粒径的固相。     

Potential distribution around a charged spherical colloidal particle in a medium containing its counterions and a small amount of added salts

A theory is developed for the potential distribution around a charged spherical colloidal particle carrying ionized groups on the particle surface in a medium containing its counterions (i.e., counterions produced from dissociation of the particle surface groups) and a small amount of added salts on the basis of the theory of Imai and Oosawa. Numerical solutions to the Poisson–Boltzmann equation for the potential distribution are obtained for the case of dilute (but not infinitely dilute) particle suspensions of volume fraction 1 for a1 (where is the Debye–Hückel parameter and a is the particle radius). Here we have taken into account the effects of (i) counterions from the particle surface groups, and (ii) the finite particle volume fraction. These effects, which are usually neglected in the conventional Poisson–Boltzmann equation, are found to be important. It is found that, as in the case of completely salt-free media, there is a certain critical value of the particle charge (which is the same as that for the completely salt-free case). When the particle charge is lower than the critical value, the potential is given by a Coulomb potential. If the particle charge is higher than the critical value, then counterions are accumulated in the vicinity of the particle surface (counterion condensation) and the potential becomes less dependent on the particle charge. The above behaviors can be observed even for the case where the electrolyte concentration is higher than the concentration of counterions from the particle surface groups, if the conditions 1 and a1are both satisfied.     

应用禁忌粒子群算法的车间调度及其并行化实现

为了解决批量生产、制造、装配等车间调度问题,基于Hadoop集群,提出应用禁忌粒子群算法的车间调度及其并行化实现.以某装载机制造车间最小化完成时间为目标,通过使用禁忌粒子群算法对车间调度问题进行求解.结果表明：在车间批量大的情况下,禁忌粒子群算法可得出有效的调度方案,避免算法陷入局部最优解.与现有的智能算法相比,禁忌粒子群算法更有利于实现全局最优解.     

基于量子微粒群优化算法的半透明介质光学参数反演

针对半透明介质光学参数估计问题,建立了脉冲激光辐照下半透明介质光学参数反演模型,采用量子微粒群优化(QPSO)算法反演了折射率和吸收系数,分析了测量误差、热物性参数对反演结果的影响,并利用敏感性分析揭示了反演精度与测量误差的关系.计算结果表明：建立的反演模型和采用的QPSO算法可以精确估计折射率和吸收系数,即使人为添加10%的测量误差,反演结果依然具有较强的鲁棒性和准确度.本研究可为半透明介质物性参数获取提供技术参考.     

基于PSO磁悬浮球系统自适应灰预测控制

目的 针对磁悬浮球系统非线性不稳定和滞后性的问题,提出一种基于粒子群优化的自适应灰色预测 PID (Proportion Integration Differentiation)复合控制策略。 方法 通过在 PID 控制模块的反馈环中引入具有等维新息特征的灰色预测器,对系统误差进行及时反馈修正,以提高控制系统的响应速度和鲁棒性;同时,融合粒子群智能算 法对控制器参数迭代优化,以提高控制系统控制精度和抗干扰能力;最后,在 MATLAB / Simulink 环境下搭建仿真 平台进行对比实验。 结果 验证基于粒子群优化的自适应灰预测控制系统模型的超调量、峰值时间、调节时间显著 改善。 结论 证实该策略可以有效抑制系统滞后性,具有良好的稳定性和鲁棒性。