考虑畸变影响的箱梁横向弯矩计算方法

为研究偏心垂向荷载作用下梯形截面单室箱梁的横向弯矩,对框架分析法计算箱梁横向弯矩的方程进行优化,并在刚性支承法的基础上提出一种更加简单的横向弯矩计算方法;与框架分析法不同,横向弯矩可采用能量变分法求解,建立以箱梁顶板剪力差为未知量的四阶控制微分方程,采用比拟的弹性地基梁解法解出剪力差,得出梯形截面单室箱梁横向弯矩的能量变分法解。对几种箱梁横向弯矩计算方法用两个算例进行验证,结果表明,能量变分法解将箱梁底板上的弯矩误差绝对值由15.41%降到了9.68%;本文方法得出的横向弯矩结果和有限元结果吻合较好,弯矩误差绝对值最大不超过6.01%;本文方法和能量变分法可有效降低箱梁底板上的弯矩误差,计算精度得到提高。     

附加约束阻尼层对星箭系统动特性的影响分析

在星箭连接支架外表面附加约束阻尼层可抑制星箭对接界面的振动,从而降低卫星在发射过程中所承受的振动和噪声载荷.本文将有限元技术与矩阵特征值摄动分析方法相结合,就卫星支架局部修改(附加约束阻尼层)对星箭系统动态特性的影响进行了分析.以已有星箭系统结构的模态信息为基础,给出了支架部位附加约束阻尼层后星箭系统动态特性变化的定量计算方法,并证明了该减振技术能够不明显的改变原星箭系统的固有特性.     

SOLITARY WAVES IN FINITE DEFORMATION ELASTIC CIRCULAR ROD

A new nonlinear wave equation of a finite deformation elastic circular rod simultaneously introducing transverse inertia and shearing strain was derived by means of Hamilton principle. The nonlinear equation includes two nonlinear terms caused by finite deformation and double geometric dispersion effects caused by transverse inertia and transverse shearing strain. Nonlinear wave equation and corresponding truncated nonlinear wave equation were solved by the hyperbolic secant function finite expansion method. The solitary wave solutions of these nonlinear equations were obtained. The necessary condition of these solutions existence was given also.     

正交复合材料面层夹层板非线性理论及应用

针对复合材料面层夹层板的构造和变形特点，考虑横向剪应力在面层和芯层粘结处的连续条件，应用Ｈａｍｉｌｔｏｎ原理建立了基于五个未知函数的正交铺设复合材料面层夹层板的非线性精化理论。对静力学问题，控制方程化简为由四个基本未知函数表述。文中还分析了简支正交铺设复合材料面层夹层板的非线性弯曲，给出了载荷—挠度特征关系和板中应力的分布状况。数值计算表明，夹层板面层和芯层粘结处的层间剪应力在工程设计中是十分重要的。     

用三维光弹法确定轴表面横向半椭圆裂纹应力强度因子及其修正系数

用三维光弹法测定了轴表面横向半椭圆裂纹的应力强度因子，并分析计算了应力强度因子修正系数，结果表明，应力强度因子的分布型式对加载条件和裂纹几何不敏感；修正系数对裂纹深度呈现对称分布趋势，仅取决于裂纹几何参数。     

FINITE LAYER ANALYSIS FOR SEMI-INFINITE SOILS (Ⅰ)——GENERAL THEORY

In the present paper a finite layer method is studied for the elastodynamics of transverse isotropic bodies. With this method, semi-infinite soils can be considered as an transverse isotropic half-space, its material functions varying with depth. Dividing the half.space into a series of layers in the direction of depth the material fimetioms in each layer are simulated by exponential fumctions Consequently, the fundamental equations to be solved can be simplified if the fouricr transform with repsect to coordinates is used. We have obtained the relationship between the "layer forces" and "layer displacements". This finite layer method, in fact, can also be called a semi-analytical method. It possesses those advantages as the usual semi-analytical methods do, and can be used to analyse the problem of the interaction between soils and structures.     

Structure of the constitutive relations for hereditarily elastic materials reinforced by hard fibers

The problem of simplifying the nonlinear hereditary elasticity relations is considered for strongly anisotropic materials such as fiber-reinforced composites. This is done using their property that the material stiffness is high along the reinforcement and is low in the cross-sectional direction. The material is considered transversally isotropic. The simplification is performed by analyzing asymptotic representations of creep relations. Relations of various degrees of accuracy for various types of composites and stress states are obtained. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 3, pp. 120–127, May–June, 2005.     

Stress Concentration at Interacting Spherical Inclusions in a Transversely Isotropic Body

An elastic-equilibrium problem is rigorously solved for a transversely isotropic body containing a finite number of arbitrarily arranged and oriented transversely isotropic spherical inclusions or an infinite periodic array of such inclusions. The solution is found based on the superposition principle for general solutions of single-particle problems and the addition theorems for partial vector solutions of the elastic equilibrium equations. The numerical results presented allow assessing the influence of matrix anisotropy on the stress concentration between inclusions     

Spatial Estimates for the Constrained Anisotropic Elastic Cylinder

This paper establishes spatial estimates in a prismatic (semi-infinite) cylinder occupied by an anisotropic homogeneous linear elastic material, whose elasticity tensor is strongly elliptic. The cylinder is maintained in equilibrium under zero body force, zero displacement on the lateral boundary and pointwise specified displacement over the base. The other plane end is subject to zero displacement (when the cylinder is finite, say). The limiting case of a semi-infinite cylinder is also considered and zero displacement on the remote end (at large distance) is not assumed in this case. A first approach is developed by considering two mean-square cross-sectional measures of the displacement vector whose spatial evolution with respect to the axial variable is studied by means of a technique based on a second-order differential inequality. Conditions on the elastic constants are derived that show the cross-sectional measures exhibit alternative behaviour and in particular for the semi-infinite cylinder that there is either at least exponential growth or at most exponential decay. A second approach considers cross-sectional integrals involving the displacement and its gradient and furnishes information upon the spatial evolution, without restricting the range of strongly elliptic elastic constants. Such models are principally based upon a first-order differential inequality as well as on one of second order. The general results are explicitly presented for transversely isotropic materials and graphically illustrated for a cortical bone.     

Two-Phase Filtration in a Transversally Isotropic Porous Medium: Experiment and Theory

The results of an experimental determination of the relative phase permeabilities during flow of two immiscible fluids in stratified sandstone with transversally isotropic characteristics are presented. The measurements were performed on samples oriented in three directions: along, perpendicular to and at an angle of 45° to the stratification plane. An approximate solution of the problem of steady two-phase flow toward a finite gallery in an anisotropic porous medium for arbitrary relative orientation of the gallery and the principal axes of the absolute permeability tensor is given. This solution was tested against the experimental results. The good agreement between the theoretical and experimental results makes it possible to recommend for engineering calculations both the relations between the absolute and phase permeabilities for transversally isotropic and orthotropic porous media and the approximate solution obtained.