WS2 超细粉体的固相法合成

WS2 超细粉体的固相法合成;WS2;固相反应;过硫系数;高能球磨;粒度     

Chemical Reactions in the Manufacture of Waveguides for Long Distance Optical Data Transmission

One of the modern high technologies which has advanced enormously in the last few years is glass fiber technology. This is used in the manufacture of glass fibers for lighting purposes and for the optical transfer of analog and digital data with a high transfer density. The technical demands made on the glass fibers required for data transfer, the optical waveguides, are extremely high and are already fulfilled to a large extent by industry. At present about four million kilometers of fiber, worth ca. 800 million DM are produced worldwide (10% in the Federal Republic of Germany). Numerous chemical processes take place during the manufacture of optical waveguides. However, in contrast both to the high and constantly growing demands on the quality and to the increasing production volume of such fibers, little is in fact known about the reactions involved. The present article will attempt to develop a picture of the multifarious reactions occurring in the course of this technical process on the basis of literature data and our own studies.     

Influence of the conditions of manufacture of nanomeric zirconium dioxide,stabilized with yttrium oxide,on its catalytic properties in the oxidation of CO

The morphological and catalytic properties of samples of nanomeric zirconium dioxide, stabilized with yttrium oxide, manufactured via the effect of a UHF field during the process of drying precipitated zirconium hydroxide and calcination at temperatures from 300 to 1000 °C, were studied. It was shown that the highest activity in the oxidation of CO occurred with 40 nm particles of zirconium dioxide prepared at 1000 °C. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 2, pp. 96–101, March–April, 2007.     

Freezing temperatures and densities of solutions of some hydrocarbons and sodium oleate inN-methylacetamide. Evidence for a solvophobic interaction

The freezing temperatures and densities (at 31°C) of solutions of octane, nonane, decane, 3,3-diethylpentane, and sodium oleate inN-methylacetamide (NMA) have been measured. The molality of the freezing solution was calculated from the density. The solubilities of octane, nonane, and decane inN-methylacetamide are also reported. Apparent molal volumes calculated from the densities are close to the values in the pure hydrocarbons and are not strong functions of the concentration. This indicates the absence of any unusual packing effect. The calculated free energies of transfer of the hydrocarbons from pure hydrocarbon to NMA solution are much less negative than the corresponding values for water, showing that the bulk solvophobic interaction inN-methylacetamide is smaller than in water. This is consistent with the freezing temperatures of sodium oleate which show that micelles do not form below 0.1 mole-kg^–1. The osmotic coefficients of the hydrocarbons calculated from the freezing temperatures showed negative deviations from ideality that were larger for the hydrocarbons with the higher molecular weights. Two estimates of the pairwise solvophobic interaction inN-methylacetamide indicate that it is also smaller than in water. The solvophobic effect in this solvent does not include the large entropy and enthalpy effects found in aqueous solutions.     

Diffusion in organic solvents: Interdiffusion coefficient of 1,1,2,2-tetrabromoethane

Interdiffusion coefficient have been measured for 1,1,2,2-tetrabromoethane in 21 organic solvents in order to ascertain the influence of shape, size, viscosity, nature and degree of branching, of the solvent molecules on transport properties. None of the existing correlations for diffusion in binary liquid systems appear to fit all the experimental data. Steric effects due to the solvent molecules are shown to be very important in the interpretation of the diffusion process.     

Averaged molecular weight of complex mixtures as determined by rapid measurements of diffusion

Summary The concept of a diffusion-averaged molecular weight, M_d is presented, and M_d is defined for polydisperse samples. It is shown via oligostyrene mixtures that M_d can be determined in 20 minutes with common chromatographic equipment. If M_d is measured and M_n or M_w is known, the polydispersity can be obtained.     

Improved accuracy of quantitative XPS analysis using predetermined spectrometer transmission functions with UNIFIT 2004

The accuracy of quantitative XPS analysis can be improved using predetermined transmission functions. Two different calibration methods are used for estimating the transmission function T(E) of a photoelectron spectrometer, applying a survey spectra approach (SSA) and a quantified peak‐area approach (QPA) to minimize the quantification error. For the SSA method, Au, Ag and Cu spectra measured with the Metrology Spectrometer II have been used. The new QPA method was built up from Au 4f, Au 4d, Au 4p_3/2, Ag 3d, Ag 3p_3/2, Cu 3p, Cu 2p_3/2, Ge 3p and Ge 2p_3/2 standard peak areas, applying adequate ionization cross‐sections and mean free path lengths for different pass energies (10 and 50 eV), lens modes (large area, large area XL, small area 150) and x‐ray sources (Al/Mg Twin and Al Mono). In the energy range 200–1500 eV a transmission function T(E) = a₀ + b₁E (where a₀, b₁ and b₂ are variable parameters) was found to give an appropriate approximation for eight tested spectrometer settings, implementing the largest changes in the case of pass energy variations. Determination and application of the transmission functions were integrated in the XPS analysis software (UNIFIT 2004) and tested by means of an Ni90Cr10 alloy. The results demonstrate the practicability of the SSA and QPA methods, giving decreased errors of <8% in comparison with errors up to 38% obtained using Wagner's sensitivity factors. Copyright © 2005 John Wiley & Sons, Ltd.     

微铂电极上1-酰基二茂铁动力学参数的测定

本文合成并研究了１－酰基二茂铁在ＣＨ２Ｃｌ２中的伏安行为，测定了它们在ＣＨ２Ｃｌ２中不同支持电解质浓度时的扩散系数，并分明用Ｚ．Ｇａｌｕｓ和Ｋ．Ａｏｋｉ方法计算了两种状态下的电子迁移速率常数。讨论了取代基的诱导效应和共轭效应及其链长对１－酰基二茂铁的动力学性质的影响以及支持电解质及其浓度等因素对伏安曲线的影响。     

胺、醇、醚类化合物电离能的自相关拓扑研究

原子的染色序数 fi 定义为 :fi=gi·xi,式中 gi 为原子i在分子中的序数 ,xi 为其染色系数 .基于fi 建立改进的原子序数自相关拓扑指数mF ,其中的1F对烷烃及其衍生物具有良好的结构选择性 .使用第一电离能 (Ip)与0 F ,1F的数量关系模型对 32种脂肪族胺、醇、醚进行估算、预测 ,结果令人满意     

The ionization of sulfurous acid in Na−Mg−Cl solutions at 25°C

The stoichiometric pK ₁ ^* and pK ₂ ^* for the ionization of sulfurous acid has been determined from emf measurements in NaCl solutions with varying concentrations of added MgCl₂ (m=0.1, 0.2 and 0.3) from I=0.5 to 6.0 molal at 25°C. These experimental results have been treated using both the ion pairing and Pitzer's specific ion-interaction models. The Pitzer parameters for the interaction of Mg²⁺ with SO₂ and HSO ₃ ^– yielded =0.085±0.004, ⁽⁰⁾ = 0.35±0.02, ⁽¹⁾ = 1.2±0.04, and C = –0.072±0.007. The Pitzer parameters ⁽⁰) = –2.8±0.4, ⁽¹⁾ = 12.9±2.9 and ⁽²⁾ = –2071±57 have been determined for the interactions of Mg²⁺ with SO ₃ ^2– . The calculated values of pK ₁ ^* and pK ₂ ^* using Pitzer's equations reproduce the measured values to within ±0.04 pK units. The ion pairing model with log K_MgSO3=2.36±0.02 and log_MgSO3 = 0.1021, reproduces the experimental values of pK ₂ ^* to ±0.01. These results demonstrate that treating the data by considering the formation of MgSO₃ yields a better fit of the experimental measurements with fewer adjustable parameters. With these derived coefficients obtained from the Pitzer equations and the ion pairing model, it is possible to make reliable estimates of the activity coefficients of HSO ₃ ^– and SO ₃ ^2– in seawater, brines and marine aerosols containing Mg²⁺ ions.