水下潜器三维成像数字传输测试系统研制

采用计算机接口、软硬件相结合的方法对水下潜器三维成像数字传输测试系统进行设计。误码检测电路是由ISA总线并配以相应的外围电路构成的号虑到系统应用的通用性，测试信号的码速范围设计为40～125Mbps，另外还介绍了硬件、软件的设计原理以及系统实验。     

复合广义齐次Poisson过程的多险种破产概率

本文推广了经典的复合泊松风险模型，建立了两类复合广义齐次poisson过程的多险种破产模型．对于新模型，我们得到了初始资本为u的破产概率φ(u)的精确表达式以及特殊情况下φ(0)的表达式，并且导出了调节系数方程和调节系数R的上下界．     

新建白果沱大桥拱轴系数的确定

原白果沱大桥因当地经济的发展及下游修建水电站的影响，需拆除重建。文章就设计过程中拱轴系数的比选情况进行了说明。     

Anomalies in the Absorption and Reflection of a High-Power Ultrashort Laser Pulse by a Plasma with a Solid-State Density

The patterns of absorption and reflection of an ultrashort laser pulse by a plasma with a solid-state density, which are realized in the mode of the normal skin effect, are studied. It is shown that a decrease in low-power pulse duration shorter than the period corresponding to the fundamental frequency of radiation leads to an increase in the absorption coefficient. If the pulse power is so high as to provide electron heating during a time shorter than the reciprocal fundamental frequency, nonlinear suppression of absorption takes place and the spectrum of the reflected radiation contains odd harmonics of the fundamental frequency.     

毛细管放电X光激光中的预脉冲研究

 为研究毛细管放电X光激光中预脉冲放电对增益的影响，用简化的XDCH程序，模拟计算了聚乙烯毛细管充Ar气、2μs脉宽的预脉冲放电过程，把预放电之后的等离子体温度、密度和电离度作为初始条件，输入XDCH程序，进行40kA典型主脉冲放电的计算模拟，给出了一些典型预放电幅度下的增益和电子密度分布情况。比较分析的结果发现，对2μs脉宽的预脉冲，100A的电流将得到较好的增益，并且预言激光线时间谱可能出现双峰结构，空间谱会出现环状结构。     

锥形光纤的偏振特性

随着光通信技术的不断发展，光纤的应用越来越广泛，而锥形光纤以其独特的传光方式越来越多地应用于光纤连接、成像及测量等领域。实验测定了不同锥角和不同长度锥形光纤的偏振特性。理论上，根据麦克斯韦方程组以及边界条件给出了光在理想光纤中的场分布，阐明了实际光纤中光的传输特性。论证了锥形光纤长度与其偏振特性的关系，进而利用几何光学方法对锥形光纤锥角与其偏振特性的关系作了定性说明。并用具体数据进行了定量计算，得出偏振光经锥形光纤传输或耦合后再传输到其终端所得到均是椭圆偏振光的结论。     

Making Use of Incomplete Observations for Regression in Bivariate Normal Model

Two estimates of the regression coefficient in bivariate normal distribution are considered: the usual one based on a sample and a new one making use of additional observations of one of the variables. They are compared with respect to variance. The same is done for two regression lines. The conclusion is that the additional observations are worth using only when the sample is very small.     

Optical and conductive properties of AlSi-alloy/SiCp composites: application in modelling CO2 laser processing of composites

The optical properties—reflectivity, real part of the refractive index, absorption coefficient as well as the thermal and electrical conductivity of AlSi-alloy/SiC_p composite were measured. The optical parameters and both conductivities decreased with the increase of SiC_p particles volume in AlSi-alloy matrix. This decrease was almost linear for the volume fraction of SiC_p particle up to 10 vol% of the total mass of the composite. For the 15 vol% of SiC_p particles, the departure from linearity is connected with the presence of additional phases in AlSi-alloy/SiC_p composite materials. The measured temperature dependencies of optical reflectivity and electrical conductivity for AlSi-alloy/SiC_p 15 vol% are of metallic character. Modelling of the interaction of the CO₂ laser radiation with AlSi-alloy/SiC_p 15 vol% composite should allow to estimate the initiation time at which the surface composite reaches melting temperature.     

Particle Size Analysis by Transmission Fluctuation Spectrometry: Experimental Results Obtained with a Gaussian Beam and Analog Signal Processing

Transmission fluctuation spectrometry (TFS) is a method for the analysis of particle size distributions based on the statistical fluctuations of a transmission signal. Complete information on the PSD and particle concentration can be retrieved by a special transformation of the transmission signal, whereby the expectancy of the transmission square (ETS) is determined after the signal has been subjected to a procedure of spatial and temporal averaging. By varying the averaging parameters over a wide range, a spectrum of ETSs is obtained and introduced into a linear equation system, which yields the PSD. In the experimental realization presented here, variable temporal averaging is realized in the frequency domain with a series of low pass filters at different cutoff frequencies while spatial averaging inevitably occurs as the particles pass through a focused Gaussian beam of finite cross section. Experimental results on spherical particles (glass beads) and non‐spherical particles (SiC) are presented. The PSDs are resolved in 30 intervals within a particle size range from 1–1000 μm, employing a modified Chahine inversion algorithm. So far, the measurements are limited to moderate particle concentrations. Some influences affecting the measurements, especially for higher particle concentrations, are discussed in detail.