煤粉燃烧过程中相转变点的小波识别

相变点的识别对研究煤粉的低温共熔和结焦有重要意义.本文分别对活性炭和加入SiO2的活性炭混合物的DSC曲线求导得到的DDSC曲线进行小波分析,提取DDSC曲线的近似部分和细节部分,得到更多关于相变的定量信息,再结合其TG,DTG曲线进行分析,实现对以上两种样品燃烧过程中相变点的识别;并将该方法运用到煤粉燃烧过程的相变分析中,对相变点后的烧结形态的场发射扫描电镜分析结果表明该方法是可行的.     

Comparative Study of Tribological Properties of Polyphenylene Sulfide (PPS), Polyethersulfone (PES), and Polysulfone (PSU)

The tribological properties of polyphenylene sulfide (PPS), polyethersulfone (PES) and polysulfone (PSU), which have similar molecular structures, were investigated using an end-face contact tribometer and a reciprocating tribometer. The thermomechanical behavior of the polymers was analyzed using dynamic mechanical analysis (DMA). PPS exhibited a maximum friction coefficient with increasing load and sliding speed, while the friction coefficients of PES and PSU decreased only slightly. The wear rate of PPS was much lower than that of PES and PSU under high loads and speeds. It is suggested that the main factors influencing the friction and wear properties of the neat polymers are their condensed state and heat resistance. Amorphous PES and PSU showed liquid-like behavior and very low friction when the frictional surface was in the molten-flow state. The macromolecular crystals of crystallizable PPS give it some solid-like behavior and load-carrying capacity; hence PPS exhibited lower wear than PES and PSU.     

On the motif distribution in random block-hierarchical networks

The distribution of motifs in random hierarchical topological networks defined by nonsymmetric random block-hierarchical adjacency matrices, is constructed for the first time. According to the classification of U. Alon et al. of network superfamilies (Milo et al., 2004 [11]) by their motifs distributions, our artificial directed random hierarchical networks fall into the superfamily of natural networks to which the neuron networks belong. This is the first example of a class of “handmade” topological networks with the motifs distribution as in a special class of natural networks of essential biological importance.     

Combinatorial synthesis and characterization of a ternary epitaxial film of Co and Mn doped Ge (0 0 1)

We report combinatorial molecular beam epitaxy synthesis and properties of a ternary epitaxial film of Co and Mn co-doped Ge grown on Ge (0 0 1) substrate. Structural effects were examined in situ by reflection high-energy electron diffraction and ex situ by microbeam X-ray diffraction techniques, and magnetic properties were probed by using magnetooptic Kerr effect. Ternary epitaxial phase diagrams have been studied for total doping concentrations up to 30 at.%, where regions of coherent epitaxy and rough disordered growth and those of near room temperature ferromagnetic ordering have been identified.     

Magnetism in FeNiW disordered alloys: Experiment and theory

We report here an experimental study of magnetization of FeNiW alloys at different compositions. We have studied variation of magnetization with temperature (at low external fields) and magnetic field (at low temperatures). The alloy shows para to ferromagnetic transitions across the composition range. We do not find any indication of the spin-glass phase. We have supplemented the experimental work with theoretical analysis using the first-principles tight-binding linear muffin-tin orbitals based augmented space recursion method. Our theoretical estimates of magnetic moment and Curie temperatures agree well with experiment. Our mean-field phase analysis also does not indicate the possibility of a spin-glass phase.     

Dynamics of polydisperse hard-spheres under strong confinement

We use molecular simulation to probe the connection between local structure and the unusual re-entrant dynamics observed for polydisperse hard-sphere liquids confined in thin slit pores. The local structure is characterised by calculating 2-D bond-orientational order parameters associated with square and hexatic order for particles in the layer adjacent to the confining walls. When the wall separation is commensurate with the average particle size, the particles primarily exhibit local hexatic order, whereas local square order increases in prevalence for incommensurate geometries. The relaxation time extracted from the ensemble-averaged mean-square displacement increases exponentially with the static correlation length associated with hexatic local order in strongly confined commensurate geometries, in agreement with theoretical predictions for dynamical slowing. Square order, by contrast, is not associated with a growing length scale for either commensurate or incommensurate geometries, indicating that it is strongly geometrically frustrated. Our results suggest that the influence of bond-orientational order on dynamical slowing may be altered by changing the extent of confinement.     

KLL Auger resonant Raman transition in metallic Cu and Ni

High energy resolution KL₂₃L₂₃ Auger spectra of polycrystalline Cu and Ni were measured using photon energies up to about 50 eV above the K-absorption edge and down to 5 eV (Cu KLL) and 4 eV (Ni KLL) below threshold. The spectra show strong satellite structures varying considerably as a function of the photon energy. In the sub-threshold region the linear dispersion of the diagram line energy positions and a distortion of the line shape as a function of photon energy, attributable to the Auger resonant Raman process, is clearly observed, indicating the one-step nature of the Auger emission. These changes in the resonant spectra are interpreted using a simple model based on resonant scattering theory in combination with partial density of states obtained from cluster molecular orbital (DV-Xα) calculations.     

Thin graphite overlayers: Graphene and alkali metal intercalation

Using LEED and angle resolved photoemission for characterisation we have prepared graphite overlayers with down to monolayer thickness by heating SiC crystals and monitored alkali metal intercalation for the multilayer films. The valence band structure of the monolayer is similar to that calculated for graphene though downshifted by around 0.8 eV and with a small gap at the zone corner. The shift suggests that the transport properties, which are of much present interest, are similar to that of a biased graphene sample. Upon alkali metal deposition the 3D character of the π states is lost and the resulting band structure becomes graphene like. A comparison with data obtained for ex situ prepared intercalation compounds indicates that the graphite film has converted to the stage 1 compounds C₈K or C₈Rb. Advantages with the present preparation method is that the graphite film can be recovered by desorbing small amounts of alkali metal and that the progress of compound formation can be monitored. The energy shifts measured after different deposits indicate that saturation is reached in three steps. Our interpretation is that in the first the alkali atoms are dispersed while the final steps are characterized by the formation of first one and then a second (2 × 2) ordered alkali metal layer adjacent to the uppermost carbon layer.     

On the Nano/Micro-Mechanics of Metallic Glass

Metallic glass (MG) is amorphous and has some outstanding properties such as ultrahigh strength, superior elasticity, and excellent thermo-plasticity. However, as MG is relatively new to the metal family, the relationship between its physical properties and amorphous structure is still unclear. This article aims to provide an insightful discussion through a comprehensive review about the investigations in the past few decades on the scientific mechanisms of this class of material. The discussion of the paper will include the following key aspects: (1) the formation mechanism of an amorphous structure through glass transition, (2) the structural characterization and models, (3) the micromechanics of plastic event and shear band, and (4) the correlation between the amorphous structure and its mechanical properties.