Surface transient effects in ultralow‐energy Cs+ sputtering of Si

This study examines the dependence of the sputter rate and the transient width (z_tr) as a function of Cs⁺ primary ion energy (impact energy (E_p) = 320 eV, 500 eV and 1 keV) and incident angles between 0 and 70° . The instrument used was the ATOMIKA 4500 SIMS depth profiler and the sample was Si with ten delta layers of Si_0.7 Ge_0.3. We observed the narrowest transient widths of between 1.4 and 2.0 nm apparent depth. This was achieved at incident angles (θ) of 30–50° . An extended transient effect was observed when profiled at θ > 50° . Below this incident angle, the transient width is less than twice the penetration depth (z_tr < 2R_norm). At minimum z_tr, z_tr ≈ R_norm. The detection sensitivity is best achieved at θ ≈ 30° for all energies investigated. The sputter rate is lowest at normal incidence, rising gradually to a maximum at θ ≈ 50–60° . This is similar to that observed with ultralow‐energy O₂⁺ primary ion beams. 1 At ultralow energies, reducing E_p does not have a significant effect in reducing z_tr. We conclude that for E_p < 1 keV, the optimum condition to achieve minimum z_tr while maintaining good sensitivity and high sputter rate is at θ ≈ 30° . Copyright © 2007 John Wiley & Sons, Ltd.     

利用时域间断伽辽金算法 求解Tellegen介质中的电磁波

目前,利用时域间断伽辽金方法（DGTD）求解各类介质中的电磁传播问题时,通常考虑求解普通介质本构关系的麦克斯韦方程组。 然而,具有非互易性本构关系的Tellegen介质中的电磁传播非常复杂,且少有研究。基于Tellegen介质的本构关系,推导出了一种适用于该介质的时域间断伽辽金系统矩阵离散方案,准确模拟了平面波在Tellegen介质中的时域传播特性。利用所提出的算法,计算了空气与Tellegen介质的分层空间模型,分析了Tellegen介质对电磁波极化偏转角度的影响;同时,针对不同电磁参数的Tellegen介质,计算了反射波与透射波的电场偏转角度,并将时域间断伽辽金方案计算的结果与文献［1］以及解析解进行了对比,验证了该方法的有效性与可行性。     

Initial data truncation for multivariate output of discrete-event simulations using the Kalman filter

Data truncation is a commonly accepted method of dealing with initialization bias in discrete-event simulation. An algorithm for determining the appropriate initial-data truncation point for multivariate output is proposed. The technique entails averaging across independent replications and estimating a steady-state output model in a state-space framework. A Bayesian technique called Multiple Model Adaptive Estimation (MMAE) is applied to compute a time varying estimate of the output's steady-state mean vector. This MMAE implementation features the use, in paralle, of a bank of Kalman filters. Each filter is constructed under a different assumption concerning the output's steady-state mean vector. One of the filters assumes that the steady-state mean vector is accurately reflected by an estimate, called the assumed steady-state mean vector, taken from the last half of the simulation data. As the filters process the output through the effective transient, this particular filter becomes more likely (in a Bayesian sense) to be the best filter to represent the data and the MMAE mean estimator is influenced increasingly towards the assumed steady-state mean vector. The estimated truncation point is selected when a norm of the MMAE mean vector estimate is within a small tolerance of the assumed steady-state mean vector. A Monte Carlo analysis using data from simulations of open and closed queueing models is used to evaluate the technique. The evaluation criteria include the ability to construct accurate and reliable confidence regions for the mean response vector based on the truncated sequences.     

直线电机瞬态特性的场路耦合分析法

运用磁网络法,进行了单边直线感应电动机的性能分析。提出了此种电机的磁网络模型,由电磁场方程导出了磁网络的参数,从而考虑了直线电机边端效应、绕组不对称分布等结构特点。场路耦合及机电耦合法的运用,使文中提供的分析模型更接近实际情况,适合于动态特性的分析     

直接法与时域法相结合用于电力系统暂态安全分析

本文将ＥＥＡＣ法与时域法相结合用于电力系统的暂态安全分析。用基于简单模型的极块的ＥＥＡＣ法扫描预先指定的事故集,求出各种情况下的稳定裕度,把明显稳定的情况过滤掉,剩下的情况再用时域法详细仿真。这种两方法的结合,可以快速准确地判断系统的暂态稳定性。     

暂态过程中金属电导率的探讨

分析暂态过程驰豫时间的不合理性,估算出暂态过程中金属电导率σ≈１ｓ·ｍ－１,即比稳态时的电导率小７个数量级左右．     

Electrochemical behaviour of an indium electrode in concentrated KOH solutions at different temperatures

Summary The electrochemical behaviour of pure indium in KOH solutions (1–4M) was studied at different temperatures (25–70°C) by potentiostatic techniques. Two anodic peaks corresponding to the formation of In(OH)₃ and In₂O₃ were observed. The heights of the two peaks increased with the increase of alkali concentration. An increase of temperature increased the peak currents and shifted their corresponding potentials to more negative values. The variation of the peak currents and peak potentials with scan rate suggested that the anodic dissolution of indium was a diffusion controlled process. In cyclic voltammetry, the reverse scan consistently showed one peak which was attributed to the reduction of anodic oxidation products into indium. X-ray diffraction analysis confirmed the presence of In(OH)₃ at the first anodic peak, In(OH)₃ and In₂O₃ at the second anodic peak and In₂O₃ in the permanent passive region.

---

Zum elektrochemischen Verhalten einer Indium-Elektrode in konzentrierter Kalilauge bei verschiedenen Temperaturen

Zusammenfassung Es wurde das Verhalten von reinem Indium in 1 – 4M KOH-Lösungen bei Temperaturen zwischen 25 und 70°C mittels potentiostatischer Methoden untersucht. Zwei anodische Peaks, entsprechend der Bildung von In(OH)₃ und In₂O₃, traten auf. Die Höhe der beiden Peaks wurde mit zunehmender Alkalikonzentration gesteigert. Eine Temperaturerhöhung verstärkte die Peakströme und verschob die entsprechenden Potentiale zu negativeren Werten. Die Abhängigkeit der Peakströme und Peakpotentiale von der Scangeschwindigkeit legte den Schluß nahe, daß die anodische Lösung von Indium in einem diffusionskontrollierten Prozeß stattfindet. Bei der cyclischen Voltammetrie zeigte der reverse Scan einheitlich einen Peak, der der Reduktion der anodischen Oxidationsprodukte zu Indium zugeschrieben wurde. Röntgendiffraktionsanalyse bestätigte die Präsenz von In(OH)₃ beim ersten anodischen Peak, In(OH)₃ beim zweiten Peak und In₂O₃ im permanent passiven Bereich.

     

Uncertainty of the Thermal Conductivity Measurement Using the Transient Hot Wire Method

This work deals with uncertainty analysis of the thermal conductivity measurement using the transient hot wire method. The characterization is made from a sample of low-density, polyethylene BRALEN SA 200-22. The utilized experimental data are obtained from the test measurements performed on the air at room temperature. The sources of measurement errors are analyzed and the uncertainty of the measured value of the thermal conductivity is evaluated. The analysis shows that in the present case the uncertainty of the thermal conductivity measurement is about ±3.3% for 68% confidence level.This revised version was published online in November 2005 with corrections to the Cover Date.     

Degradation Kinetics of an Epoxy/Cycloaliphatic Amine Resin Under Isothermal and Non-isothermal Conditions

A study of an epoxy-cycloaliphatic amine system has been realized using a thermogravimetric technique (TG). Isothermal and non-isothermal (dynamic) methods were employed to determine the kinetic data of this system. Five methods were used for determining the activation energies of this system in the dynamic heating experiments. In two of them (Flynn-Wall-Ozawa, and Kissinger) it is not necessary to have a prior knowledge of the reaction mechanism of the degradation behaviour for this system. In the other ones (Coats and Redfern, Horowitz and Metzger, and Van Krevelen et al.) it is necessary to know this reaction mechanism, besides Criado et al. method was used for determining it. The results have shown that good agreement between the activation energies obtained from all methods can be achieved if it is assumed that the degradation behaviour of this system is of sigmoidal-rate type. This revised version was published online in August 2006 with corrections to the Cover Date.     

The drawing behavior of Y-Ba-Cu-O sol from non-aqueous solution by a complexing process

A complexing process is developed to prepare Y-Ba-Cu-O superconducting fibers. The process is not identical to typical sol-gel processes; here the resulting gel network is built up by hydrogen bonding linkage among complexing species in non-aqueous solution. Cu acetate, [Cu(OAC)₂], Ba methoxyethoxide [Ba(ORE)₂] and Y acetate [Y(OAC)₃] are used as precursors for preparing homogeneous gels while -methacrylic acid (HOAA) and diethylenetriamine (DETA) as complexing agents, and methoxyethanol (REOH) as solvent. Fibers drawn from a sol obtained through reduced pressure present no or little deformation at 80°MoC via adjusting the amount of DETA and HOAA. Cu(OAC)₂, Ba(ORE)₂ and Y(OAC)₃ in the complexing process have been demonstrated to form gels without hydrolysis and condensation at ambient atmosphere. The relationships between the drawing behavior of sols and gel structure with different amounts of DETA and HOAA are suggested. The concentration region of drawing the gel fibers with no or little deformation heated at 80°MoC is also found.