Pulsed microwave-driven argon plasma jet with distinctive plume patterns resonantly excited by surface plasmon polaritons

Atmospheric lower-power pulsed microwave argon cold plasma jets are obtained by using coaxial transmission line resonators in ambient air.The plasma jet plumes are generated at the end of a metal wire placed in the middle of the dielectric tubes.The electromagnetic model analyses and simulation results suggest that the discharges are excited resonantly by the enhanced electric field of surface plasmon polaritons.Moreover,for conquering the defect of atmospheric argon filamentation discharges excited by 2.45-GHz of continued microwave,the distinctive patterns of the plasma jet plumes can be maintained by applying different gas flow rates of argon gas,frequencies of pulsed modulator,duty cycles of pulsed microwave,peak values of input microwave power,and even by using different materials of dielectric tubes.In addition,the emission spectrum,the plume temperature,and other plasma parameters are measured,which shows that the proposed pulsed microwave plasma jets can be adjusted for plasma biomedical applications.     

Antimicrobial silica particles loaded with quaternary ammonium polyethyleneimine network

Silica particles functionalized with quaternary ammonium groups were prepared by interpenetrating polyethylenimine (PEI) into silica particles and crosslinking with diiodopentane, followed by octyliodide alkylation and methyliodide quaternarization (S‐QA‐PEI). The synthesized S‐QA‐PEI particles were identified with a slight particle size increase of 2–3 µm. Different ratios of PEI:silica particles were prepared and analyzed. While silica particles are negatively charged, ?16.7 ± 5.11 mV, the prepared S‐QA‐PEI particles are positively charged, +50–60 mV. These particles were embedded in poly(ethylene vinyl acetate) and poly(ethylene methacrylic acid) coatings which exhibited strong antibacterial activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Large Hexagonal Bi‐ and Trilayer Graphene Single Crystals with Varied Interlayer Rotations

Bi‐ and trilayer graphene have attracted intensive interest due to their rich electronic and optical properties, which are dependent on interlayer rotations. However, the synthesis of high‐quality large‐size bi‐ and trilayer graphene single crystals still remains a challenge. Here, the synthesis of 100 μm pyramid‐like hexagonal bi‐ and trilayer graphene single‐crystal domains on Cu foils using chemical vapor deposition is reported. The as‐produced graphene domains show almost exclusively either 0° or 30° interlayer rotations. Raman spectroscopy, transmission electron microscopy, and Fourier‐transformed infrared spectroscopy were used to demonstrate that bilayer graphene domains with 0° interlayer stacking angles were Bernal stacked. Based on first‐principle calculations, it is proposed that rotations originate from the graphene nucleation at the Cu step, which explains the origin of the interlayer rotations and agrees well with the experimental observations.     

Balancing the Rate of Cluster Growth and Etching for Gram‐Scale Synthesis of Thiolate‐Protected Au25 Nanoclusters with Atomic Precision

We report a NaOH‐mediated NaBH₄ reduction method for the synthesis of mono‐, bi‐, and tri‐thiolate‐protected Au₂₅ nanoclusters (NCs) with precise control of both the Au core and thiolate ligand surface. The key strategy is to use NaOH to tune the formation kinetics of Au NCs, i.e., reduce the reduction ability of NaBH₄ and accelerate the etching ability of free thiolate ligands, leading to a well‐balanced reversible reaction for rapid formation of thermodynamically favorable Au₂₅ NCs. This protocol is facile, rapid (≤3 h), versatile (applicable for various thiolate ligands), and highly scalable (>1 g Au NCs). In addition, bi‐ and tri‐thiolate‐protected Au₂₅ NCs with adjustable ratios of hetero‐thiolate ligands were easily obtained. Such ligand precision in molecular ratios, spatial distribution and uniformity resulted in richly diverse surface landscapes on the Au NCs consisting of multiple functional groups such as carboxyl, amine, and hydroxy. Analysis based on NMR spectroscopy revealed that the hetero‐ligands on the NCs are well distributed with no ligand segregation. The unprecedented synthesis of multi‐thiolate‐protected Au₂₅ NCs may further promote the practical applications of functional metal NCs.     

Channelled Porous TiO2 Synthesized with a Water‐in‐Oil Microemulsion

Porous titanium dioxide synthesized with a bicontinuous surfactant template is a promising method that leads to a high active surface area electrode. The template used is based on a water/isooctane/dioctyl sodium sulfosuccinate salt together with lecithin. Several parameters were varied during the synthesis to understand and optimize channel formation mechanisms. The material is patterned in stacked conical channels, widening towards the centre of the grains. The active surface area increased by 116 % when the concentration of alkoxide precursors was decreased and increased by 241 % when the template formation temperature was decreased to 10 °C. Increasing the oil phase viscosity tends to widen the pore aperture, thus decreasing the overall active surface area. Changing the phase proportions alters the microemulsion integrity and disrupts channel formation.     

Exploring the Molecular Structure of Imidazolium–Silica‐Based Nanoparticle Networks by Combining Solid‐State NMR Spectroscopy and First‐Principles Calculations

A DFT‐based molecular model for imidazolium–silica‐based nanoparticle networks (INNs) is presented. The INNs were synthesized and characterized by using small‐angle X‐ray scattering (SAXS), NMR spectroscopy, and theoretical ab initio calculations. ¹¹B and ³¹P HETCOR CP MAS experiments were recorded. Calculated ¹⁹F NMR spectroscopy results, combined with the calculated anion–imidazolium (IM) distances, predicted the IM chain density in the INN, which was also confirmed from thermogravimetric analysis/mass spectrometry results. The presence of water molecules trapped between the nanoparticles is also suggested. First considerations on possible π–π stacking between the IM rings are presented. The predicted electronic properties confirm the photoluminescence emissions in the correct spectral domain.     

Characterization of a Robust CoII Fluorescent Complex Deposited Intact On HOPG

The new diimine fluorescent ligand ACRI‐1 based on a central acridine yellow core is reported along with its coordination complex [Co₂( ACRI‐1 )₂] ( 1 ), a fluorescent weak ferromagnet. Due to the strong fluorescence of the acridine yellow fluorophore, it is not completely quenched when the ligand is coordinated to Co^II. The magnetic properties of bulk complex 1 and its stability in solution have been studied. Complex 1 has been deposited on highly ordered pyrolitic graphite (HOGP) from solution. The thin films prepared have been characterized by AFM, time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS), grazing incidence X‐ray diffraction (GIXRD), X‐ray absorption spectroscopy (XAS), X‐ray magnetic circular dichroism (XMCD) and theoretical calculations. The data show that the complex is robust and remains intact on the surface of graphite.     

Interfacial Chiral Selection by Bulk Species

A chiral selection process in a self‐assembled soft monolayer of an achiral amphiphile as a consequence of its interaction with chiral species dissolved in the aqueous subphase, is reported. The extent of the chiral selection is statistically measured in terms of the enantiomorphic excess of self‐assembled submillimeter domains endowed with well‐defined orientational chirality that is unambiguously resolved using optical microscopy. Our results show that the emergence of chirality is mediated by electrostatic interactions and significantly enhanced by hydrophobic effects. This chiral chemical effect can be suppressed and even reversed by opposing a macroscopic physical influence, such as vortical stirring. This result gives evidence for the crucial role of hydrodynamic effects in supramolecular aggregation.