New isothermal equation of state of solids applied to high pressures

In the present paper, a new two-parameter inverted equation of state (EOS) is developed which is found to be working very well in the high-pressure region. To check its success and validity, this EOS has been applied in a number of solids. The computed volume compression is found to be in very good agreement with the experimental data in the whole range of pressure in all the solids. The minimum and the maximum pressure range used in the present study is 0–320 kbar and 0–3000 kbar, respectively.     

关于足球运动员保持竞技状态的探讨

足球运动的不断发展和进步 ,赛事不断增加 ,赛季不断延长 ,比赛激烈性不断加大。如果在比赛中能够充分发挥运动员的竞技状态 ,这将对比赛起着不可估量的作用 ,而长期的保持这种状态 ,对整个赛季比赛的获胜至关重要。     

Modeling hyperelastic behavior of rubber: A novel invariant‐based and a review of constitutive models

A constitutive phenomenological model completing the Gent‐Thomas concept is carried out to formulate laws governing the hyperelastic behavior of incompressible rubber materials. It is shown that the phenomenological Gent‐Thomas model (1958) and the constrained chain model (1992) give similar precise results at small to moderate deformation. On the other hand, comparisons of the outcome of the proposed model with that of the molecular model from the combined concepts of Flory‐Erman and Boyce‐Arruda (2000), and with those of the phenomenological models of Ogden (1982), Yeoh‐Fleming (1997), Pucci‐Saccomandi (2002) and Beda (2005) are made. Residual inconveniences raised by attractive continuum models in rubber elasticity literature have been successfully overcome. Results from both the statistical and phenomenological mechanics concepts are compared with the data of some useful classical materials (rubbers of Treloar, Rivlin‐Saunders, Pak‐Flory and Yeoh‐Fleming). The results permit one to see salient equivalence of the two theories for a more reliable prediction of stress‐stretch response for all states of any mode of deformation. A complete and exhaustive analysis of the Mooney plot that combines small and very large extension‐compression has been quite essential in assessing the validity of models. A method of identification of material parameters is presented and data of the simple tension suffice for the determination of the parameter values. It is shown that the ordinary identification procedures, such as the usual least squares, a very much used numerical method in materials investigation, can be unsuitable in some cases of hyperelastic modeling. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1713–1732, 2007     

化学分析在火灾原因技术鉴定中的应用

采用化学分析方法对火灾现场中的微量油品、特殊物质和混凝土等痕迹物证的化学分析鉴定,对火灾原因和火灾责任的认定起关键作用.     

On an approach to the study of the Jaynes–Cummings sum in quantum optics

A new approach to the study of the Jaynes–Cummings sum, which determines the atomic inversion in quantum model of a single two-level atom interacting with a single mode of the quantized radiation field, based on the number theory theorems on approximation of trigonometric sums is presented.      

PURE STATE APPROACH TO $C(X)×_\alpha Z_n$

ＰＵＲＥ ＳＴＡＴＥ ＡＰＰＲＯＡＣＨ ＴＯ Ｃ（ｘ）_αＺ_nＬＩＢＩＮＧＲＥＮ；ＬＩＮＱＩＮＧ（ＩｎｓｔｉｔｕｔｅｏｆＭａｔｈｅｍａｔｉｃｓ，ＡｃａｄｅｍｉａＳｉｎｉｃａ，Ｂｅｉｊｉｎｇ１０００８０，Ｃｈｉｎａ．Ｐｒｏｊｅｃｔｓｕｐｐｏｒｔｅｄｂｙｔｈ?..     

Identification of micro-scale calorimetric devices II

The miniaturized calorimetric devices furnish a reduced working flat surface and permits measurements with extremely low-mass quantities. The experimental sensitivity shows relevant position dependence with x-y surface coordinates and with z-distance. The device identification is realized via a 2-D model based in Fourier general equation. Using the Marquardt method the experimental flat surface device can be identified and the fitted parameters used to simulate the behavior of the experimental system. From the model, the effects of several dissipation configurations can be evaluated. Also, via the RC-analogy, a way to 3-D experimental devices is roughly described. This revised version was published online in July 2006 with corrections to the Cover Date.     

New developments in the field of piezothermal analysis

The solid transitions of C₂₁, C₂₃ and C₂₅ n-paraffins are examined from a piezothermal point of view. The paper is divided into two parts. The first is a report of the main features of a piezothermal analyzer when pressure scanning allows the continuous record of the expansivity as a function of pressure up to 5 Kilobars. Small samples are required and the scanning speeds vary from 0.3 to 16 Kilobars per hour. The second part describes the experimental procedure appropriate for solid state determinations. The resulting piezothermograms are presented and entropies of transformation are determined. A model allows a crude statistical approach giving the entropies of transformation with the correct order of magnitude. Problems related with phase transformations under a shearing stress are considered.

---

Zusammenfassung Feststoffumwandlungen bei C₂₁, C₂₃ und C₂₅ n-Paraffinen wurden unter dem Gesichtspunkt der Piezowärme untersucht. Im ersten Teil vorliegender Arbeit werden die Haupteigenschaften eines piezothermischen Analysators beschrieben, bei dem durch Druck-Scanning die kontinuierliche Aufzeichnung des Ausdehnungsvermögens als Punktion des Druckes bis zu 5 kbar ermöglicht wird. Es werden nur kleine Proben benötigt, die Scanning-Geschwindigkeit variiert zwischen 0,3 und 16 kbar/h. Der zweite Teil beschreibt das geeignete experimentelle Verfahren zur Feststoffzustandsbestimmung. Die erhaltenen Piezothermogramme werden dargestellt und die Entropien der Umwandlung bestimmt. Ein Modell liefert eine grobe statistische Näherung, die die Entropien der Umwandlung in der richtigen Grö\enordnung liefert. Probleme in Zusammenhang mit Phasenumwandlungen bei Scherbeanspruchungen werden betrachtet.

     

Classical limit of relativistic quantal system with attractive Coulomb interaction

Using the appropriate harmonic oscillator states and reasonable approximations, we construct coherent wavepackets corresponding to the solutions of the Klein-Gordon equation for the attractive potentialV(r)=−k/r, k>0, in two and three space dimensions. We deduce the corresponding classical limit in two dimension by requiring that the expectation value 〈r〉 of the radial variable is large. In the case of three dimensions, besides the condition of large 〈r〉, we make the uncertainty Δr=[〈r ²〉 − 〈r〉²]^1/2 a minimum with respect to certain parameter of the wavepacket. We then investigate the trajectory traversed by the wavepacket in the classical limit. We find that the classical limit of this relativistic quantal problem gives, in the leading order, the same expression for the rate of motion of the perihelion as that given by the solution of the corresponding special relativistic classical dynamical problem. We also briefly discuss some of the subtle aspects of the classical limit of the relativistic quantal system, in general.