Densities and Apparent Molar Volumes of Aqueous NaNO3 Solutions at Temperatures from 292 to 573 K and at Pressures Up to 30 MPa

Densities of four aqueous NaNO₃ solutions (0.100, 0.303, 0.580, 0.892 mol-kg^–1 H₂O) have been measured in the liquid phase with a constant-volume piezometer immersed in a precision liquid thermostat. Measurements were made at ten isotherms between 292 and 573 K. The range of pressure was 0.1–30 MPa. The total uncertainty of density, pressure, temperature, and concentration measurements were estimated to be less than 0.06%, 0.05%, 10 mK, and 0.014%, respectively. Values of saturated densities were determined by extrapolating experimental P- data to the vapor pressure at fixed temperature and composition. Apparent molar volumes were derived using measured values of density for the solutions and for pure water. The apparent molar volumes were extrapolated to zero concentration to yield partial molar volumes at infinite dilution. The temperature, pressure, and concentration dependence of partial and apparent molar volumes were studied. The measured values of density and apparent and partial molar volume were compared with data reported in the literature.     

Determination of the thiol redox state of organisms: new oxidative stress indicators

This study describes a new methodology by which the concentrations of non-protein (NP) thiols glutathione (GSH), cysteine (CSH), N-acetylcysteine (AcCSH), and protein (P) thiols (PSH), as well as the contribution of these components to symmetric and mixed disulfides (NPSSR, NPSSC, NPSSCAc, PSSR, PSSC, PSSCAc, PSSP) can reliably be measured. The methodology consists of a strict sequence of methods which are applied to every sample. Free thiols at any given state of the procedure are measured by Ellmans assay, the CSH fraction is measured by its unique response in the ninhydrin assay, AcCSH is selectively measured with ninhydrin after enzymatic deacylation, proteins are separated from non-protein thiols/disulfides by precipitation with trichloroacetic or perchloric acid, disulfides are reduced into free thiols with borohydride, mixed disulfides between a protein and a non-protein component are measured by extracting the non-protein thiol from the protein pellet after borohydride treatment, and protein thiols/disulfides are measured after resolubilization of the protein pellet.When this method was applied to animal and fungal tissue, new molecular indicators of the thiol redox state of living cells were identified. The findings of the present study clearly show that the new parameters are very sensitive indicators of redox state, while at the same time the traditional parameters GSH and GSSG often remain constant even upon dramatic changes in the overall redox state of biological tissue. Therefore, unbiased assessment of the redox state also requires explicit measurement of its most sensitive thiol indicators.Electronic Supplementary Material Supplementary material is available in the online version of this article at . A link in the frame on the left on that page takes you directly to the supplementary material.     

钙钛矿型CaSiO_3解压缩和重压缩过程的分子动力学模拟

用分子动力学模拟方法 (MD)研究了 3 0 0K时钙钛矿型CaSiO3 ,从高压到负压的解压缩过程 .MD模拟获得的P V关系与实验数据相近 ,与已报道的MD模拟数据基本一致 ,所得体积模量也在实验数据分布范围内 .减压缩和重压缩的MD模拟数据与实验结果相似 .钙钛矿型CaSiO3 解压缩成非晶态时 ,存在两个结构破坏阶段 :破坏硅氧八面体和破坏钙氧二十面体 .当钙氧二十面体被破坏后 ,重压缩不能得到钙钛矿型结构 .只要钙氧二十面体未被破坏 ,重压缩可恢复钙钛矿型结构 .本研究得到的结果尚未见相关报道 .由MD模拟数据计算了CaSiO3 系统的红外光谱 ,分析这些数据可知钙钛矿型CaSiO3 解压缩非晶化是一个二阶软模相变 .研究表明钙钛矿型CaSiO3 结构存在一个等容的亚稳极限 ,其解压缩非晶化是一个受动力学控制的亚稳状态 .     

TiZSM—48型分子筛的快速合成及性能

在Na_2O-1.6-C_6H_(14)N_2-SiO_2-TiO_2-H_2O体系中首次用快速动态法和静态法合成了TiZSM-48型分子筛,考察了两种合成方法的晶化动力学。利用XRD、IR、XPS、SEM、DRS、TG-DTA等测试手段对TiZSM-48型分子筛进行了表征,结果表明,Ti进入了分子筛骨架,动态法合成比静态法合成快得多,且样品的晶粒较小。热分析表明,两种方法合成的样品热稳定性均较好。     

Transition state geometry in radical abstraction reactions: comparison of interatomic distances in the intersecting parabolas and Morse curves models with quantum-chemical calculations

Interatomic distances in the transition state were estimated for the reactions of radical abstraction: H^· + H₂, H^· + HCl, H^· + CH₄, N^·H₂ + NH₃, HO^· + H₂O, HO₂ ^· + HOOH, and C^·H₃ + SiH₄. The calculation was performed by the quantum-chemical density functional method or coupled clusters method (QCH), as well as by the methods of intersecting parabolas (IPM) and Morse curves (IMM), using experimental data (activation energies and reaction enthalpies). The results of the latter two methods are close to the quantum-chemical calculation and differ only by the increment a: r(IPM or IMM) = a + r(QCH), where a = –4.5·10^–12 m for IPM and a = +1.9·10^–12 m for IMM.     

CuO/Al2O3催化剂高温固相反应的原位XRD和Raman研究

采用原位XRD和激光Raman光谱等技术对CuO/Al2O3系列催化剂高温下的表面组成和体相结构的变化进行研究.结果表明,随着焙烧温度升高,CuO首先与载体Al2O3发生固相反应生成CuAl2O4.CuAl2O4层能阻止外层CuO进一步向载体Al2O3扩散,从而使部分CuO稳定在CuO/Al2O3催化剂的表层.     

Theoretical investigation of the decarbonylation of acetaldehyde by Fe+ and Cr+.

We report a comprehensive theoretical study on the decarbonylation of acetaldehyde by Fe+ and Cr+. Various intermediates, transition states, and products involved in the decarbonylation reactions are fully optimized at the B3LYP/6-311+G(2df,2pd) level of theory. The potential energy surfaces (PESs) corresponding to [M,O,C2,H4]+(M=Cr and Fe) are examined in detail using B3LYP and CCSD(T) methods, respectively. The validity of these theoretical methods is calibrated with respect to the available thermochemical data. Calculations suggest that the Cr+ mediated decarbonylation of acetaldehyde takes place in four steps on the sextet surface: encounter complexation, C-C activation, aldehyde H-shift, and nonreactive dissociation, in good accordance with the Co+ mediated decarbonylation of acetaldehyde [Zhao, Zhang, Guo, Wu, Lu, Chem. Phys. Lett. 2005, 414, 28], while for the Fe+/acetaldehyde system decarbonylation can occur on both the quartet and the sextet PESs. The quartet pathway, which experiences spin-orbit coupling between the two surfaces, is energetically more favorable; whereas along the sextet decarbonylation coordinate several high-energy barriers are revealed. The theoretical results are compared with the experimental product kinetic energy and angular distributions of decarbonylation of acetaldehyde by Fe+ and Cr+ measured using a crossed-beam technique [Sonnenfroh, Farrar, J. Am. Chem. Soc. 1986, 108, 3521].     

无水醋酸镍与水杨醛肟固相配位反应的热化学研究

用新型的具有恒定温度环境的反应热量计，以６ｍｏｌ·ｄｍ－３ＨＣｌ溶液为量热溶剂，分别测定了ＨＳＡＯ，Ｎｉ（Ａｃ）２和Ｎｉ（ＳＡＯ）２，ＨＡｃ先后溶于该溶剂的溶解焓．设计了一个新的热化学循环，计算得到该配位反应的反应焓ΔｒＨ＝－８６．０７５ｋＪ·ｍｏｌ－１，并估算出了ΔｆＨ［Ｎｉ（ＳＡＯ）２，２９８Ｋ］＝－４０１．３３６ｋＪ·ｍｏｌ－１．     

Transient Spectroscopic Properties of [60] Fullerene—Containing Cyclic Sulphoxide

The properties of the triplet excited state of [60] fullerene-containing cyclic sulphoxide have been investigated by time-resolved absorption spectroscopy. Transient absorption bands of [60] fullerene-containing cyclic sulphoxide showed two decay-components, which wrer attributed to triplet excited states of different spin multiplicity. The properties of photoexcited states of [60] fullerene-containing cyclic sulphoxide are also reported.     

容量法测定氧化钒中的各种价态钒

用NaOH溶液处理样品，分离V（V）然后以Fe(Ⅱ）滴定测定之。定量加入过量的V（V）到上述残渣中并用H2SO4溶解，用Fe(Ⅱ）滴定，计算出V（Ⅱ），V（Ⅲ）的含量。V（Ⅳ）的测定是通过从总钒量中扣除V（Ⅱ）、V（Ⅲ）、V（Ⅴ）的含量得到。V（Ⅱ）、V（Ⅲ）和V（Ⅴ）的回收率均大于96％，其8次测定结果的相对标准偏差分别为：9．8％、0．4％、1．2％；本法快速、简便，在实际应用中效果良好。