Determination of L-Dopa and L-Dopamine in Aqueous Solutions Using In-Loop SPME Coupled with LC

A new in-loop solid-phase microextraction (in-loop-SPME) technique, based on an aluminum capillary tube coupled to HPLC, is described for on-line isolation, concentration, and analysis of analytes from aqueous samples. L-Dopa and L-dopamine, in aqueous solutions, were selected as model compounds. The main conditions affecting extraction of the analytes from aqueous samples, desorption, injection, and chromatographic separation were investigated. The method is simple and reproducible. Using the proposed method, reliable determination of L-dopa and L-dopamine at parts-per-billion concentrations was achieved. The calibration plots were linear in the range of 2.5–1500 ng mL⁻¹ with correlation coefficients of 0.999 and 0.998 for L-dopa and L-dopamine, respectively. The detection limits were 0.5–1 ng mL⁻¹ with a relative standard deviation less than 4.1%. Concentration factors more than 100-fold were obtained for these compounds.     

提升教学魅力,打造一门好课——《材料表面与界面》教学改革探索

《材料表面与界面》为高分子材料与工程专业复合材料方向的限选课。本课程对于学生奠定学科基础、培养学生对复合材料方向的兴趣具有重要的先导作用。笔者以"提升教学魅力,打造一门好课"为改革目标,充分贯彻了"教学内容是教学魅力的根本,教学方法与教学手段是将教学内容高效转化为教学魅力的催化剂"这一指导思想,从教学内容与教学方式两方面进行改革。从教学反馈看,这些改革措施能够改善教学效果,提高学生学习效率,得到了学生的认可。     

Visible Up-Conversion Luminescence in Ho3+: BaTiO3 Nano-Crystals Prepared by Sol Gel Technique

Visible up-conversion emissions at (435, 545, 580, 675 and 690 nm) and (437, 547 575 and 675 nm) have been observed from the sol-gel derived nano-crystalline Ho³⁺: BaTiO₃ powders and thin films respectively, under 808 nm laser diode excitation emissions. Combined with the energy level structure of Ho³⁺ ions and the kinetics of the visible emissions, the up-conversion mechanism has been analyzed and explained. The blue, green and red emissions of both samples has been attributed to the ground state-directed transition from (⁵F₁), (⁵S₂) and (⁵F₅), which are populated through excited state absorption (ESA) for 808 nm excitation. Nano-structure pure barium titanate and doped with different concentrations of Ho³⁺ ions in the from of powder and thin film have been prepared by sol-gel technique, using barium acetate (Ba(Ac)₂), and titanium butoxide (Ti(C₄H₉O)₄), as precursors. The thin films were prepared by sol-gel spin coating method. The as-grown thin films and powders were found to be amorphous, which crystallized to the tetragonal phase after heating at 750°C in air for 30 minutes. The crystallite sizes of the thin film and powder both doped with 4% Ho³⁺ ions was found to be equal to 11 and 16 nm, respectvely.     

Kinetic studies of nickel speciation in model solutions of a well-characterized humic acid using the competing ligand exchange method

Publications on the binding characteristics of metals with humic acid (HA) are sparse. Here we investigated the release of nickel from Ni(II)-HA complexes using model solutions of three different [Ni(II)]/[HA] mole ratios at three different pH values; we also compared the results with those of [Ni(II)]/[FA] complexes from previous work in this laboratory. Ligand exchange kinetics using the competing ligand exchange method (CLEM) were studied using two different techniques: graphite furnace atomic absorption spectrometry (GFAAS) with Chelex 100 resin as the competing ligand, and adsorptive cathodic stripping voltammetry (AdCSV) with dimethylglyoxime as the competing ligand to measure the rate of dissociation of Ni(II)-HA complexes. The results of the kinetic studies showed that as the [Ni(II)]/[HA] mole ratio was decreased, the rate of dissociation of Ni(II)-HA complexes decreased, and the proportion of free Ni²⁺ ions plus very labile nickel complexes decreased while the proportion of the less labile kinetically distinguishable components increased. Generally, the rate of dissociation of Ni(II)-HA complexes was slower than that of Ni(II)-FA complexes. Studies on the validity of the kinetic model showed that the concentrations of chemical species varied in a reasonable way with pH and the [Ni(II)]/[HA] mole ratios, indicating that the kinetically distinguishable components have chemical significance and the kinetic model is valid.     

C(2×2)S/Fe(001)吸附体系的SCF-Xa-MS研究

采用SCF-X_α-MS方法, 对于C(2×2)S/Fe(001)吸附体系, 选择Fe_5S和Fe_9S两种原子簇模型, 研究了该吸附体系的电子结构、吸附成键特征及其相互作用图象。结果表明, S吸附于Fe(001)单晶表面具有较强的定域性质, S原子与底物Fe原子之间的吸附相互作用主要表现为S(3p)-Fe(4s,3d)之间的轨道相互作用。通过对表面吸附键长的优化, 其结果与X.S.Zhang等的ARPEFS的实验结果一致。     

Liquid Chromatographic Analysis of Arabinosylcytosin and 1-β-D-Arabinofuranosyluracil in Treatment with Cyclophosphamide and Pirarubicin

A reversed-phase liquid chromatographic (RPLC) method has been developed for determination of arabinosylcytosin (Ara-C) and its metabolite 1-β-D-arabinofuranosyluracil (Ara-U) on a 250 mm × 4.6 mm i.d., 5 μm particle, Diamonsil C₁₈ column. The mobile phase was a mixture of 5% methanol and 95% 10 mmol L⁻¹ phosphate buffer adjusted to pH 5.5. The flow-rate was 1.0 mL min⁻¹ and the injection volume 20 μL. Eluting compounds were detected at 270 nm by use of an ultraviolet detector. Under these LC conditions cyclophosphamide (CTX) and pirarubicin (THP), two other medicines given with Ara-C in clinical treatment, do not interfere with measurement of Ara-C and Ara-U. Individual calibration plots of peak area against concentration generated from analysis of standard solutions were used to calculate the concentrations of Ara-C and Ara-U in sample solutions. The calibration plot was linear in the range 2.5–100 μg mL⁻¹, the average recovery of Ara-C and Ara-U was more than 98% (RSD < 2.5%), and between-day and within-day precision, expressed as relative standard deviation (RSD), were below 4.0%. LOQ for both Ara-C and Ara-U was 2 μg mL⁻¹. The method is rapid, simple, accurate and reproducible, and especially useful for application to patient samples.     

Own N-layered integrated molecular orbital and molecular mechanics study of the reaction of OH<Superscript>−</Superscript> with polychlorinated hydrocarbons CH<Subscript>(4−n)</Subscript>Cl<Subscript>n</Subscript> (n=2–4)

The reliability of the two-layer own N-layered integrated molecular orbital and molecular mechanics (ONIOM) method was examined for the S_N2 reaction CH_(4–n)Cl_n+OH^–. In the ONIOM calculation, only the methyl chloride and OH^–were treated at a high level and the effect of polychlorination was taken into account only at a low level. The ONIOM results were compared with the target CCSD(T)/aug-cc-pVDZ//MP2/aug-cc-pVDZ results obtained by Borisov etal. [(2001) J. Phys. Chem. A 105:7724]. The ONIOM[MP2/aug-cc-pVDZ:B3LYP/6-31+G(d)] was found to reproduce well the target geometry and energy at the MP2/aug-cc-pVDZ level. The single-point improved energetics at the ONIOM[CCSD(T)/aug-cc-pVDZ:MP2/6-31+G(d)] is found to give results nearly as accurate as the target CCSD(T)/aug-cc-pVDZ//MP2/aug-cc-pVDZ results. The substantially reduced cost, 20% for optimization and 5% for single-point improved energy of the target cost for n=4, as well as small errors suggest that ONIOM is a powerful tool for accurate potential-energy surfaces of the reaction of large polyhalohydrocarbons.     

Sol-gel polyimide-silica composite membrane: gas transport properties

The effect of introduction of silica particles prepared by the sol-gel technique on the gas transport properties of a polyimide film was studied. The sorption and permeation of N₂, O₂, CO₂, H₂ and CH₄ were studied and correlated with morphological changes in the polymer structure. From sorption isotherms, we observed that the composite membrane presents higher solubility coefficients than the polyimide one. The solubility coefficient ratio between the composite and the polyimide is about 1.5–2.0. The isotherms were analyzed in terms of the dual mode sorption. The Henry's coefficient and the Langmuir's affinity and saturation constants were obtained allowing to calculate the Langmuir to Henry concentration ratios as function of the gas pressure. These ratios decrease until zero within a certain pressure range as long as the Langmuir's mode is acting and they are higher for the polyimide membrane when compared with the composite one. This study was completed with calorimetric measurements during the sorption. The gas interaction energy in kJ/mol decreases within the same pressure range as previously described. The measured energies are higher for the polyimide film when compared with the composite one because the polyimide membrane presents a stronger energetic effect caused by a higher Langmuir's contribution. From permeation studies at 3.15⁵ Pa, the composite membrane showed higher permeability coefficients and permselectivities than the polyimide one. All these results were explained, taking into account the difference on the imidization degree of both membranes and the morphological changes which may be induced by the silica nodules in the organic/inorganic interphases.     

On the calculation of expectation values and transition matrix elements by coupled cluster method

Summary Finite order expressions are derived for expectation values and transition matrix elements within the framework of the coupled cluster method.     

First radical cation salts of 2,5-bis(1,3-dithian-2-ylidene)-1,3,4,6-tetrathiapentalene (BDA-TTP) with copper(II) metal complex anions: β-(BDA-TTP)4Cu2Cl6 and (BDA-TTP)2CuCl4

New radical cation salts based on 2,5-bis(1,3-dithian-2-ylidene)-1,3,4,6-tetrathiapentalene (BDA-TTP) with copper(II) metal complex anions, β-(BDA-TTP)₄Cu₂Cl₆ and (BDA-TTP)₂CuCl₄, were synthesized and structurally characterized. Single crystals were prepared by electrochemical oxidation of BDA-TTP under galvanostatic conditions. X-ray diffraction study demonstrated that the salts have a layered structure, in which the conducting BDA-TTP layers alternate with the [Cu₂Cl₆]²⁻ or [CuCl₄]²⁻ anions. Both salts show the semiconductor-type temperature dependence of the conductivity. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 48–54, January, 2007.