磨料水射流切削金属表面涂层薄铁的加工性研究(英文)

以试验研究数据为依据,对磨料水射流切削金属表面涂层薄铁的可加工性进行了详细的分析与研究。结果表明,磨料水射流加工技术能够在该种材料上切削出高质量地切口,且生产率较高。还对很多切口特性与加工参数之间的关系进行了全面的讨论,由此推荐了最好的加工参数并建立了切口的几何及质量经验公式,以用于加工过程的控制和优化。     

新型磁选设备的小型试验研究

叙述了新型实验室设备──磁选柱的结构、分选原理,以及选别各种磁铁矿粗精矿的实验室研究。试验结果表明,磁选柱是磁铁矿的,一种高效精选设备。磁选柱的分选特点是把磁铁矿连生体颗粒有效地从磁铁矿粗精矿中分选出来,从而获得高品位的铁精矿。     

Thermal and mechanical-induced phase transformations during YAG and alumina–YAG syntheses

The preparation of pure Y₃Al₅O₁₂ (YAG) and 50 vol% Al₂O₃–YAG composite powders by a wet chemical route is presented. The role of the synthesis temperature during reverse-strike precipitation has been investigated, showing its relevant effect on the purity and homogeneity of YAG powder. The composite material was prepared by comparing two different synthesis routes. A composite powder was synthesized via reverse-strike temperature-controlled co-precipitation. In the latter case, a pure-alumina precursor was firstly reverse-strike precipitated and then doped with an yttrium salt solution. For both syntheses, the role of thermal and mechanical pre-treatments on the phase development was demonstrated.     

Modern Analysis

The important advances being made in modern analytical methods are indicative of the fundamental changes that are occuring in the theory and practice of “analytical chemistry”. “Information optimization” demands a new approach in teaching and research, and calls for the intergration of chemistry with other scientific and technical disciplines.     

Study of process parameters for starch,gluten, and glycerol mixtures

This work involved a study of the effect of processing variables (temperature, water content, rotor speed, and time) on the mechanical properties of starch:gluten:glycerol mixtures in the weight ratio of 40:40:20. The properties of the materials were affected by the processing variables. The torque decreased with water content, indicating that water facilitates the plasticization of mixtures, whereas the increase in temperature accelerated the evaporation of water, thus increasing the torque. Ultimate tensile strength was achieved at the lowest temperature (110°C) and the highest water content (20%), whereas maximum elongation was achieved for the material processed at the highest temperature, 150°C, and the fastest rotor speed, 70 rpm. Copyright © 2007 John Wiley & Sons, Ltd.     

一种基于二进小波变换的自适应滤波方法

根据信号和噪声经小波变换后在不同尺度上有不同的特征，将相邻尺度二进小波变换值的相关量进行归一化处理并与小波变换值比较来判断信号与噪声，以噪声在各尺度的方差作为终止迭代的标准，提出了一种基于二进小波变换小波域选择噪声的自适应滤波方法。研究了模拟信号的去噪过程、半峰宽和信噪比对去噪结果的影响，并对模拟含噪信号和含噪毛细管电泳信号去噪前后的结果进行了比较。实验结果表明：由于该方法具有良好的自适应性和显著的滤波效果，必将得到广泛的应用。     

Surface chemical analysis of raw cotton fibres and associated materials

The surface chemical composition of raw unscoured cotton was successfully investigated by the surface analytical techniques X-ray Photoelectron Spectroscopy (XPS) and Time of Flight Secondary Ion Mass Spectrometry (ToF-SIMS). The presence of non-cellulosic material at the fibre surface was established and determined to be a complex mixture of fatty acids, alcohols, alkanes, esters and glycerides. The effect of scouring and bleaching was to reduce the surface concentration of these materials but even after aqueous processing some non-cellulosic material residue was still detected at the fibre surface.     

Microwave assisted low temperature synthesis of sodium zirconium phosphate (NaZr<Subscript>2</Subscript>P<Subscript>3</Subscript>O<Subscript>12</Subscript>)

Sodium zirconium phosphate [NaZr₂P₃O₁₂], a potential ceramic matrix for fixation of high level nuclear waste, was synthesized by heating the mixture of sodium carbonate [Na₂CO₃], zirconyl nitrate hydrate [ZrO(NO₃)₂·5H₂O] and ammonium dihydrogen phosphate [NH₄H₂PO₄] in air, in a resistance heated furnace and a microwave heating system respectively in the temperature range 450 to 650°C. The mixture heated for 1 h in a resistance furnace at 450°C yielded a poorly crystalline NaZr₂P₃O₁₂ [NZP]. Increasing the temperature to 650°C produced a highly crystalline product. The same mixture heated in a microwave oven at 450°C for 1 h however, yielded the most crystalline NZP.In an alternate method, the mixture of sodium dihydrogen phosphate (NaH₂PO₄), zirconium dioxide (ZrO₂) and diammonium hydrogen phosphate [(NH₄)₂HPO₄] heated in resistance furnace at 650°C for the same period did not react in air. It also did not yield the pure product at 450°C when heated in microwave assembly for 1 h.The authors thank the Board of Research in Nuclear Sciences (BRNS) of the Department of Atomic Energy (DAE) for the financial support for this work under the project No. 2000/37/19/BRNS/1959 dtd09-02-02.     

Differential scanning calorimetry and the advanced solidification processing of metals and alloys

This paper describes some examples of the use of differential scanning calorimetry (DSC) in providing information for advanced solidification processing of metals and alloys. Spray forming, squeeze casting, grain refinement and crystallization of amorphous alloys are all discussed. DSC measurements are shown to be valuable for testing kinetic theories of nucleation and growth, and validating solidification process models.     

Ester interchange reactions catalyzed by tin compounds in reactive processing: NMR contribution via reactions with model compounds

Interchange reactions involving esters were used in reactive processing with a view to obtaining polymer blends with stabilized morphology. Dibutyltinoxide (DBTO) appeared to be an excellent catalyst for these reactions. In fact, it was shown that the true catalytic entity is a dimeric alkoxy, acyloxy distannoxane entity formed in situ, during processing, by the reaction of the DBTO with the polymer ester groups. This compound was first obtained with model esters and characterized by multinuclear NMR analysis (¹H, ¹³C, ¹¹⁹Sn). The catalytic efficiency of the in situ polymeric distannoxane was compared with other added parent distannoxanes. Later on – still with model compounds – ligand exchanges at the tin sites were investigated and it was shown that these exchanges are not essential to the catalyst activity, but when they take place it increases the catalytic efficiency. Then, this type of catalysis was successfully used for interchange reactions in reactive extrusion of different polymer blends, some applications are briefly presented. To cite this article: M.-F. Llauro and A. Michel, C. R. Chimie 9 (2006).