300 MN水压机垫板组力学行为规律研究

针对巨型水压机多层垫板组力学行为的多维非线性特征,本文应用作者开发的多体接触有限元程序,分析了300MN水压机垫板组力学行为规律,揭示了垫板组加载方式为几何空间状态与力学行为的相关性,说明了垫板组异常变形机制,提出了垫板组设计和使用的几点准则。     

Tevatron: Recent results and prospects at the upgrade

In this article, we review some of the recent results from CDF and DØ experiments at the Tevatron and their prospects at the upgrade. Among the topics discussed are top quark physics, electroweak physics, qcd physics and new physics beyond standard model.     

Study on the EM Scattering of Rivets on the Plate

The electromagnetic (EM) scattering by rivets on the conducting plate is studied for the first time by using electric field integral equation (EFIE) in conjunction with the moment method. The surfaces of the rivets and the plate are partitioned into triangular cells, the current distribution on the patches is represented by sub-domain type basis function, the EFIE is translated into matrix equation by the Galerkin method, then the current coefficient is obtained. The results show the properties of radar cross section (RCS) varying with the incident angle when there are rivets on the plate.     

关于均值KIRCHHOFF板非线性边界镇定问题的几点注记

对于均值K IRCHHOFF板非线性边界镇定问题给出几点注记.首先应用G reen公式对具有非线性边界反馈控制的均值K IRCHHOFF板所决定的非线性系统的能量衰减速度进行了重新推导,从而修正了前人的结果.然后应用极大单调函数的定义和分部积分技巧,对均值K IRCHHOFF板非线性边界镇定问题所决定的非线性算子A的极大单调性给出了重新证明,进而更正了已有文献中相应证明的欠妥之处.     

横向爆炸载荷下开孔弹性板的应力集中

基于ANSYS 7.0/LS-DYNA程序,对3 m×3 m四边简支、厚度为0.025 m、中心开有0.3 m×0.3 m方孔的弹性板,在下三角爆炸载荷作用下的应力响应进行了分析;利用能量密度时间分布函数(TDFED)确定了动应力集中因子,重点讨论了时间步长和采样时间间隔对计算结果的影响。     

圆柱型正交各向异性圆形薄板的非线性非对称弯曲问题（Ⅱ）

本文利用“正则摄动法”［２］研究文献［１］中由“两变量法”［３］所得到的关于Ｗｎｍ，和的递推方程和递推边界条件的求解问题。求得了本问题的一致有效渐近解，最后作为实例，我们利用“混合摄动法”［４］研究了轴对称线性弯曲问题，并将所得结果与文献［５］中给出的精确解相比较，两者基本上是一致的。     

双折射双频激光器偏振特性的分析

用激光原理和晶体光学原理分析了腔内加旋光晶体的激光器输出光的偏振特性，实验和分析表明，激光器输出两束不同频率的垂直线偏振光，激光器两端输出光的偏振面有一夹角ａ，且此夹角与晶轴和传光方向的夹角θ有关。理论计算结果在双折射双频激光器的实验结果符合很好。     

微通道板增益疲劳机理研究

微通道板的增益疲劳是微通道板的主要问题之一，本文分析了微通道板的表面结构模型，同通道板活性表面上碱金属的逸出和碳的增加是导致微通道板的增益疲劳的主要原因，另外，探讨碱金属逸出的机理和碳污染的来源，介绍延长微通道板工作寿命的有效方法。     

Deposition of Oral Bacteria and Polystyrene Particles to Quartz and Dental Enamel in a Parallel Plate and Stagnation Point Flow Chamber

The aim of this paper is to determine to what extent (i) deposition of oral bacteria and polystyrene particles, (ii) onto quartz and dental enamel with and without a salivary conditioning film, (iii) in a parallel plate (PP) and stagnation point (SP) flow chamber and at common Peclet numbers are comparable. All three bacterial strains showed different adhesion behaviors, and even Streptococcus mitis BMS, possessing a similar cell surface hydrophobicity as polystyrene particles, did not mimic polystyrene particles in its adhesion behavior, possibly as a result of the more negative ζ potentials of the polystyrene particles. The stationary endpoint adhesion of all strains, including polystyrene particles, was lower in the presence of a salivary conditioning film, while also desorption probabilities under flow were higher in the presence of a conditioning film than in its absence. Deposition onto quartz and enamel surfaces was different, but without a consistent trend valid for all strains and polystyrene particles. It is concluded that differences in experimental results exist, and the process of bacterial deposition to enamel surfaces cannot be modeled by using polystyrene particles and quartz collector surfaces.     

Optimum gas chromatographic conditions in wall-coated capillary columns. Extended and simplified forms of the Golay-equation

Band broadening in capillary columns is satisfactorily described by the Golay-equation extended to situations of appreciable pressure drop by Giddings. In practice, however, several simplifications are often made. The effect of these simplifications on the calculated values of the minimum plate height and optimum carrier gas velocity are treated systematically.