Carburizing of titanium with plasma jets under reduced pressure

The carburizing of titanium with argon-methane (0.1%) and argon-methane (0.1%)-hydrogen (2%) plasma jets at a pressure of 200 Torr was studied. The carburizing of titanium was not successful with the argon-methane plasma jet because the specimen was covered with graphitic carbon. A hard and thick TiC layer was formed by the argon-methane-hydrogen plasma jet in a short time without the deposition of graphitic carbon. Emission spectra from the plasma jets show that the addition of hydrogen increases the amount of CH radicals as well as decreases the amount of C₂ and C in the plasma jet. The decrease of C₂ and C suppresses the deposition of graphitic carbon and enhances the TiC formation.Partly presented at Gordon Research Conference on Plasma Chemistry, August 11–15, 1986, Tilton, New Hampshire.     

Preparation and characterization of nitrogen-doped titanium dioxides

A type of high visible-light active titanium oxinitride(TiO2-xNx) powder was prepared by a simple proc-ess:the calcination of the hydrated titanium dioxide at the atmosphere of ammonia-argon using a tu-bular electric furnace at high temperatures. The hydrated titanium dioxide was synthesized as the precursor of TiO2-xNx using titanic acid as raw material,which came from sulfate technique of produc-ing titanium white. The effects of temperature and reaction time on the nitrogen content,grain size and crystal structure were studied. The visible-light activity and photocatalysis capability of the powder were also investigated.     

Titanium-based molecular squares and rectangles: syntheses by self-assembly reactions of titanocene fragments and aromatic N-heterocycles

This paper reports on the potential of titanium compounds as building blocks for supramolecular polygons. Self-assembly reactions of low-valent titanocene units and N-heterocyclic bridging ligands lead to novel titanium-based supramolecular squares. Pyrazine (3), 4,4'-bipyridine (4), and tetrazine (5) were used as bridging ligands, and the acetylene complexes [Cp2Ti{eta2-C2(SiMe3)2}] (1) and [(tBuCp)2Ti{eta2-C2(SiMe3)2}] (2) as sources of titanocene fragments. Molecular rectangles can be synthesized by stepwise reduction of the titanocene dichlorides [Cp(2)TiCl2] and [(tBuCp)2TiCl2] and consecutive coordination of two different bridging ligands. The resulting complexes are the first examples of molecular rectangles containing bent metallocene corner units. Single-crystal X-ray analyses of the tetranuclear compounds revealed the geometric properties of the molecular polygons in the solid state. Comparison of bond lengths and angles in coordinated and free ligands reveals the reduced state of the bridging ligand in the low-valent titanium compounds. The syntheses and properties of these novel, highly air- and moisture-sensitive compounds are discussed.     

Early-late heterobimetallic alkoxides as model systems for late-transition-metal catalysts supported on titania

Titanium complexes with chelating alkoxide ligands [TiCp*(O(2)Bz)(OBzOH)] (1) and [TiCp*(Me)((OCH(2))(2)Py)] (2) were synthesised by reaction of [TiCp*Me(3)] (Cp*=eta(5)-C(5)Me(5)) with 2-hydroxybenzyl alcohol ((HO)(2)Bz) and 2,6-pyridinedimethanol ((HOCH(2))(2)Py), respectively. Complex 1 reacts with [(M(mu-OH)(cod))(2)] (M=Rh, Ir) to yield the early-late heterobimetallic complexes [TiCp*(O(2)Bz)(2)M(cod)] [M=Rh (3), Ir (4)]. Carbon monoxide readily replaces the COD ligand in 3 to give the rhodium dicarbonyl derivative [TiCp*(O(2)Bz)(2)Rh(CO)(2)] (5). Compound 2 reacts with [(M(mu-OH)(cod))(2)] (M=Rh, Ir) with protonolysis of a Tibond;Me bond to give [TiCp*((OCH(2))(2)Py)(mu-O)M(cod)] [M=Rh (6), Ir (7)]. The molecular structures of complexes 3, 5 and 7 were established by single-crystal X-ray diffraction studies.     

New hybrid chelating sorbents with grafted 3-aminopropionate groups based on mixed silicon,aluminum, titanium,or zirconium oxides

A series of new hybrid organo-inorganic sorbents with the 3-aminopropionate chelating group was synthesized. The synthesis includes the copolycondensation (sol—gel method) of tetraethoxysilane, 3-aminopropyltriethoxysilane, and several modifiers (MeSi(OEt)₃, EtSi(OEt)₃, Ti(OEt)₄, AlONO₃, ZrOCl₂) followed by carboxyethylation with acrylic acid. The obtained chelating sorbents were characterized by elemental analysis, FT-IR and ¹H NMR spectroscopy, and thermogravimetry. The N-carboxylated sorbents have a higher sorption capacity with respect to metal ions (0.5–0.9 mmol g⁻¹, pH 6.3, NH₄OAc, 20 °C) than the starting sorbents with the primary amino group (0.05–0.2 mmol g⁻¹) and manifest high selectivity for copper(II) ion extraction. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1783–1788, August, 2005.     

Synthesis and Catalytic Application of Homo-bimetallic Metallocene Complexes as Ethylene Polymerization Catalysts

ＩｎｔｒｏｄｕｃｔｉｏｎＩｔｉｓｗｅｌｌｋｎｏｗｎｔｈａｔｍｅｔａｌｌｏｃｅｎｅｓａｃｔｉｖａｔｅｄｗｉｔｈｍｅｔｈｙｌａｌｕｍｉｎｏｘａｎｅ (ＭＡＯ)ａｒｅｈｉｇｈｌｙａｃｔｉｖｅｈｏｍｏｇｅｎｅｏｕｓＺｉｅｇｌｅｒ Ｎａｔｔａｃａｔａｌｙｓｔｓｔｈａｔｐｒｏｄｕｃｅｐｏｌｙｏｌｅｆｉｎｗｉｔｈｃｏｎ ｔｒｏｌｌｅｄｓｔｅｒｅｏｒｅｇｕｌａｒｉｔｙａｎｄｎａｒｒｏｗｍｏｌｅｃｕｌａｒｗｅｉｇｈｔｄｉｓｔｒｉ ｂｕｔｉｏｎ ,1 4 ｈｏｗｅｖｅｒ,ｔｈｅｍｏｌｅｃｕｌａｒｗｅｉｇｈｔｏｆｔｈｅｐｏｌｙｍ…     

Syntheses of Some New Group 4 non-Cp Complexes Bearing Schiff-base, Thiophene Diamide Ligands Respectively and Their Catalytic Activities for α-Olefin Polymerization

Introduction Tremendous advances have been witnessed during the last decade in the syntheses and application of Group 4 metal complexes because of the motivity which comes from both academic and industrial field. Among them, studies have been dominated by the complexes supported by bis or mono cyclopentadienyl ligands, such as Cp2MX2 or half sandwich amide (CGC) com-plexes.1-6 At that time chemists paid a little attention to the non-cyclopentadienyl complexes, but in recent years, many chem…     

Nonclassical titanocene silyl hydrides

The titanocene silyl hydride complexes [Ti(Cp)2(PMe3)(H)(SiR3)] [SiR3=SiMePhCl (6), SiPh2Cl (7), SiMeCl2 (8), SiCl3 (9)] were prepared by HSiR3 addition to [Ti(Cp)2(PMe3)2] and were studied by NMR and IR spectroscopy, X-ray diffraction (for 6, 8, and 9), and DFT calculations. Spectroscopic and structural data established that these complexes exhibit nonclassical Ti-H-Si-Cl interligand hypervalent interactions. In particular, the observation of silicon-hydride coupling constants J(Si,H) in 6-9 in the range 22-40 Hz, the signs of which we found to be negative for 8 and 9, is conclusive evidence of the presence of a direct Si-H bond. The analogous reaction of [Ti(Cp)2(PMe3)2] with HSi(OEt)3 does not afford the expected classical silyl hydride complex [Ti(Cp)2(PMe3)(H)[Si(OEt)3]], and instead NMR-silent titanium (apparently TiIII) complex(es) and the silane redistribution product Si(OEt)4 are formed. The structural data and DFT calculations for the compounds [Ti(Cp)2(PMe3)(H)(SiR3)] show that the strength of interligand hypervalent interactions in the chlorosilyl complexes decreases as the number of chloro groups on silicon increases. However, in the absence of an Si-bound electron-withdrawing group trans to the Si-H moiety, a silane sigma complex is formed, characterized by a long Ti-Si bond of 2.658 A and short Si-H contact of 1.840 A in the model complex [Ti(Cp)2(PMe3)(H)(SiMe3)]. Both the silane sigma complexes and silyl hydride complexes with interligand hypervalent interactions exhibit bond paths between the silicon and hydride atoms in Atoms in Molecules (AIM) studies. To date a classical titanocene phosphane silyl hydride complex without any Si-H interaction has not been observed, and therefore titanocene silyl hydrides are, depending on the nature of the R groups on Si, either silane sigma complexes or compounds with an interligand hypervalent interaction.     

Formation of dinuclear titanium and zirconium complexes by olefin metathesis--catalytic preparation of organometallic catalyst systems

The titanium complex [(C(5)H(4)bond;allyl)TiCl(3)] (2) undergoes olefin metathesis coupling when treated with 3 mol % of [Cl(2)(L(1))(L(2))Ru=CHPh] (L(1)=L(2)=PCy(3), 4 a; L(1)=PCy(3), L(2)=(H(2)IMes), 4 b) to yield the dimetallic complex [Cl(3)Ti(C(5)H(4))-CH(2)CH=CHCH(2)-(C(5)H(4))TiCl(3)] (5). The allyl-substituted titanocene complex [Cp(C(5)H(4)bond;allyl)TiCl(2)] (3) analogously yields the dimetallic system 6 when treated with 4. The ansa-zirconocene complex [Me(2)Si(C(5)H(4))(C(5)H(3)bond;allyl)ZrCl(2)] (7) cleanly yields the analogous dimetallic coupling product 8 (>95 % isomerically pure), when treated with catalytic amounts of 4 b in toluene. Complex 8 gives an active homogeneous ethene or propene polymerization catalyst, especially at elevated temperatures, when treated with excess methylalumoxane.     

低价钛引起的芳酮肟的反应

在低价钛试剂 (TiCl4/Sm)作用下取代苯乙酮肟发生脱肟反应生成酮 ,而在同样条件下 ,二芳酮肟则生成二芳酮、胺或希夫碱