导电高分子和无机氧化物为基灵巧窗口的探索

用电化学合成的方法在氧化铟锡导电玻璃上分别镀上了电致变色的三氧化钨和聚苯胺膜，并将这两种ＩＴＯ玻璃用高分子电解质粘结形成灵巧窗口。当外加电压在－１．４Ｖ－＋１．４Ｖ之间变化时，灵巧窗口在可见光区具有很显的透光率变化。     

氟化物熔体中电解共沉积硼化钛的阴极过程

采用循环伏安法首次研究了ＬｉＦ－ＮａＦ－Ｋ２ＴｉＦ６－ＫＢＦ４熔盐体系中钛离子和硼离子在铂、钼电极上电化学还原及电合成硼化钛的阴极过程机理。对恒电位电解的沉积物进行了Ｘ射线衍射分析。结果表明，当体系中硼钛摩尔比Ｂ／Ｔｉ大于２时，钛与硼可在同一电位下实现电解共沉积并反应生成硼化钛。     

沸腾回流均相沉淀法合成超细粉体TiO2

采用沸腾回流均相沉淀法，以不同浓度的TiCl4和尿素为原料，制备出超细粉体TiO2，并利用STM及XRD对其进行表征．结果显示TiO2颗粒呈球状，一次粒径为29-34nm，TiCl4浓度较大时TiO2以金红石型为主，TiCl4浓度较小时TiO2为锐钛型、金红石型的混晶．     

TiO2纳米晶表面羟基自由基的生成对光催化性能的影响

采用溶胶-凝胶法制备纳米TiO2.用X射线衍射谱(XRD)测定了TiO2粒子的晶相结构;以对苯二甲酸作为探针分子,结合化学荧光技术研究了TiO2表面羟基自由基的生成;以降解罗丹明B(RhB)为模型反应,考察了TiO2粒子的光催化活性.结果表明,TiO2粒子的晶相结构对其羟基自由基的生成和光催化活性产生显著影响;羟基自由基的生成速率越大,光催化活性越高.     

纳米粉Ba1-xSrxTiO3的合成

根据液相反应胶粒析出机理及实验原理，制备了Ba1-xSrxTiO3的前驱体(Ti(OH)4、SrCO3,BaCO3),然后经过焙烧，在较低温度(450℃)时是碳酸钡锶和二氧化钛分子状态的混合纳米晶，继续焙烧(900℃)成为发育完整的Ba1-xSrxTiO3纳米粉体，经TEM和XRD表征，平均粒径为100m，粒径分布较窄，分散性良好，XRD表明此纳米粉体为钛酸钡锶Ba1-xSrxTiO3。     

Nb微合金化对低合金高强钢耐海水腐蚀性能的影响

利用室内模拟海水加速腐蚀试验及电化学分析,研究了Nb微合金化对Cu-Cr-Ni-P系低合金高强钢耐海水腐蚀性能的影响。结果表明,含Nb钢与不含Nb钢组织均由铁素体和珠光体构成,但Nb微合金化后钢中珠光体组织减少且晶粒细化明显,其在模拟海水介质中的平均腐蚀速率与不含Nb钢相比,降低了约12%,阳极腐蚀电流密度也有所降低。由此可见,在Cu-Cr-Ni-P系低合金高强钢中加入Nb元素有助于提高其耐海水腐蚀性能。     

Effect of cold rolling process on microstructure and mechanical properties of high strength β titanium alloy thin sheets

The microstructure and mechanical properties of Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe high strength titanium alloy sheets prepared by unidirectional cold rolling and two-step cross cold rolling were investigated. Results showed that the β phase grains were refined significantly by cold rolling followed by solution treatment for a short time.Compared to unidirectional cold rolling, the short time solution treatment after two-step cross rolling could significantly reduce the non-uniformity of the microstructure of the alloy sheets. After aging treatment at 550 ℃,the anisotropy of the mechanical properties still existed in the unidirectional rolled sheets, and the tensile strength was highest along the rolling direction. After solution and aging treatment, the anisotropy of the mechanical properties of the two-step cross rolling process sheet was not obvious than unidirectional cold rolling,and alloy had good strength and plasticity matching.     

Photooxidation of Selected Polycyclic Aromatic Hydrocarbons in Aqueous Organic Media in The Presence of Ti(IV)Oxide

Abstract

We have studied the photooxidation of selected polycyclic aromatic hydrocarbons (PAH) in the presence of Ti(IV)oxide in a mixed solvent system consisting of N-methylpyrrolidinone (NMP) and water. Reaction rates for the photooxidation of acenaphthylene and pyrene were investigated by monitoring the disappearance of the PAH substrate from the reaction mixture as a function of time. For both compounds plots of In C_o/C_t, as a function of time yielded straight lines, indicating first order kinetics with respect to the substrate. With an initial acenaphthylene concentration of 1.0 gL^?1 the first order reaction rate constant was 0.19 hr^?1 and the half life was 3.7 hr. With an initial pyrene concentration of 0.2 gL^?1 the first order reaction rate constant was 0.0285 hr^?1 and the half life was 24 hr. The photoproducts were characterized by high performance liquid chromatography with diode-array detection (HPLC/DAD) and by liquid chromatography/atmospheric pressure chemical ionization mass spectrometry (APCI/LC-MS). Although a number of simple oxidation products were identified the bulk of the photoproducts consisted of the parent PAH substituted with one or more solvent (NMP) molecules. The product mixtures from the photooxidation of the non-mutagens acenaphthylene and pyrene were found to be also non-mutagenic in our Salmonella typhimurium forward mutation assay.     

Structure Prediction of Binary Pernitride MN2 Compounds (M=Ca,Sr, Ba,La, and Ti)

Metal‐pernitride compounds belong to a class of chemical systems in which both the complex ions and the non‐bonding electrons may play roles in the formation of their modified crystalline structures. To investigate this issue, the energy landscapes of pernitrides of metals with different maximum valence (M=Ca, Sr, Ba, La, and Ti) were globally explored on the ab initio level at standard and high pressures, thereby yielding possible (meta)stable modifications in these systems together with information on how the landscape changed as function of the valence of the metal cation. For all of the systems in which no compounds had been synthesized so far, we predicted the existence of kinetically stable modifications that should, in principle, be experimentally accessible. In particular, TiN₂ should crystallize in a new structure type, TiN₂‐I.