Cu/SiO2催化剂上苯胺和乙二醇一步合成吲哚的研究

采用浸渍法，制备了用于合成吲哚的Cu/SiO2催化剂，研究了不同载体和活性组分Cu对苯胺和乙二醇一步合成吲哚反应的催化活性，发现γ-Al2O3、活性炭、Na-Y，SiO2-MgO、MCM41、SiO26种载体中，SiO2是最好的载体；催化剂活性组分Cu含量为0.78mmol/gSiO2时，吲哚的收率高达88%，考察了水蒸汽、氢气、反应温度及接触时间等因素对反应性能的影响，并对催化剂进行了TG测试，得到了Cu/Sio2催化剂催化合成吲哚适应反应条件。     

量子点PbS修饰纳米结构TiO2复合膜的光电化学研究

用光电流作用谱、光电流-电势图等光电化学方法研究了ITO(铟锡氧化物导电玻璃)/TiO₂ /Q-PbS(量子点PbS)膜电极的光电转换性质。结果表明，由于量子尺寸的效应，在膜电极制备中，随着ITO/TiO₂电极在饱和Pb(CH₃COO)₂溶液中浸泡时间的不同，所制备的Q-PbS颗粒大小不同，禁带宽度随着浸泡时间的增大而减小，浸泡时间为40 s、在80 ℃烘干下制备的Q-PbS的禁带宽度为1.68 eV，其价带位置为-5.072 eV。Q-PbS修饰ITO/TiO₂电极可使光电流发生明显的红移，从而提高宽禁带半导体的光电转换效率。     

Interfacial properties of self-organized TiO<Subscript>2</Subscript> nanotubes studied by impedance spectroscopy

The semiconductor properties of the interface TiO₂/electrolyte in high organized porous oxide structures were analyzed by means of impedance spectroscopy near the flat band potential. The impedance and capacitance studies performed on the as-anodized and thermally treated samples (anatase) indicate the presence of a duplex structure formed by (1) the oxide at the bottom of the pores and (2) the walls of pores with different donor densities and surface state concentrations.     

Competitive adsorption and desorption of a bi-solute mixture: effect of activated carbon type

This study aims to clarify the effects of carbon activation type and physical form on the extent of adsorption capacity and desorption capacity of a bi-solute mixture of phenol and 2-chlorophenol (2-CP). For this purpose, two different PACs; thermally activated Norit SA4 and chemically activated Norit CA1, and their granular countertypes with similar physical characteristics, thermally activated Norit PKDA and chemically activated Norit CAgran, were used. The thermally activated carbons were better adsorbers for phenol and 2-CP compared with chemically activated carbons, but adsorption was more reversible in the latter case. 2-CP was adsorbed preferentially by each type of activated carbon, but adsorption of phenol was strongly suppressed in the presence of 2-CP. The simplified ideal adsorbed solution (SIAS) model underestimated the 2-CP loadings and overestimated the phenol loadings. However, the improved and modified forms of the SIAS model could better predict the competitive adsorption. The type of carbon activation was decisive in the application of these models. For each activated carbon type, phenol was desorbed more readily in the bi-solute case, but desorption of 2-CP was less compared with single-solute. This was attributed to higher energies of 2-CP adsorption.     

Synthesis of nitro and amino derivatives of benzothiacrown ethers

The condensation reaction of 1,2-bis(2-haloethoxy)-4-nitrobenzenes with acyclic α,ω-(oxa)alkanedithiols in the presence of alkali metal carbonates produced a series of nitrobenzodithiacrown ethers with macrocycles of different size. The structures of three ethers were established by X-ray diffraction. A new method was developed for the synthesis of nitrobenzomonothia-15-crown-5 ether. Nitro derivatives of benzodithiacrown ethers were tested as reagents for extraction of palladium(II), platinum(IV), and rhodium(III) from hydrochloric acid solutions. Extraction of Pd^II salts was found to be highly selective compared to that of Pt^IV and Rh^III salts. Benzodithia-15-crown-5 ether is the most efficient extractant for palladium(II). Reduction of nitrobenzothiacrown ethers with hydrazine hydrate in the presence of a platinum catalyst afforded their amino derivatives. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 958–966, May, 2007.     

Synthesis of homochiral 2-C-perfluoroalkyl substituted d- and l-riboses

Homochiral 2-C-perfluoroalkyl substituted d- and l-riboses were synthesized via Barbier, Grignard and Ruppert type reactions. The influence of the size of the perfluoroalkyl groups, attached to C-2, on the furanose/pyranose as well as on the α-furanose/β-furanose and α-pyranose/β-pyranose ratio in solution was studied.     

Methyl trifluoropyruvate in the Pictet-Spengler reaction

Condensation of methyl trifluoropyruvate with 2-(3,4-dimethoxyphenyl)ethylamine, tryptamine, and (D, L)-tryptophan yielded 1-methoxycarbonyl-1-trifluoromethyl-6,7-dimethoxy-1,2,3,4-tetrahydroisoquinoline, 1-methoxycarbonyl-1-trifluoromethyl-1,2,3,4-tetrahydro-9H-pyrido[3,4-b]indole, and Z-1-methoxycarbonyl-1-trifluoromethyl-3-carboxy-1,2,3,4-tetrahydro-9H-pyrido[3,4-b]indole, respectively. The Z configuration of the latter was determined by x-ray structural analysis.A. N. Nesmayanov Institute of Organoelemental Compounds, Russian Academy of Sciences, 117813 Moscow, Russia. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1831–1836, August, 1992.     

Polarographic behaviour of salicylaldehyde-2-pyridylhydrazone and its copper(II) complex

The polarographic behaviour of salicylaldehyde-2-pyridylhydrazone (SAPH) has been studied in aqueous buffer solution containing 40% ethanol using DC and DP polarographic methods. In the pH range 1.8–7.5 the observed single irreversible reduction wave is assigned to the splitting of the N-N bond and reduction of C=N centre. In alkaline medium, a second wave appears at a more negative potential due to the reduction of the salicylaldehyde which is formed by hydrolytic decomposition of the SAPH molecule. The effect of pH on the limiting current andE _1/2 as well as the reduction mechanism are discussed and compared with similar compounds. The kinetic parameters of the electrode reaction have been calculated.The analytical properties of the copper(II)-SAPH system is described. The complex gave rise to a single irreversible well-defined wave (E _1/2=–0.58 V at pH=5.2). The reaction process is diffusion controlled. A method is suggested for the determination of Cu(II) in presence of different metal ions as the difference in theirE _1/2 values is sufficient for the purpose.This work is taken partly from the M. Sc. Thesis of Jamal S. Shalabi     

Characteristics of vinyl iodide microwave plasma etching of GaAs/AlGaAs and InP/InGaAs heterostructures

Vinyl iodide (C₂H₃I) microwave discharges with additions of H₂ and Ar are found to provide faster etch rates than conventional CH₄/H₂/Ar discharges for InP, InGaAs, GaAs, and AlGaAs. This is a result of the relatively high volatilities of indium, gallium, and aluminum iodide species. The etched features are smooth and anisotropic over a wide range of do self-biases (–150 to –350 V), process pressures (1–20mTorr), and microwave powers (150–500 W). The polymer that forms on the mask during the plasma exposure can be readily removed in O₂ discharges. Electron spectroscopy for chemical analysis (ESCA) showed that the etched surfaces are slightly deficient in the group V elements under most conditions, but changes to the optical properties of the semiconductors are minimal. No defects are visible by transmission electron microscopy (TEM) in GaAs or InP samples etched at dc biases –250 V.