The Relation between the Sensitivity and HeatingVoltage of ZnSnO 3 Gas Sensor

对ＺｎＳｎＯ３气敏元件特性的测试结果表明,元件灵敏度随加热电压的变化而变化．当加热电压小于某一特定值ＶＨ０时,灵敏度不变;当加热电压大于３倍ＶＨ０时,灵敏度降低,元件失效。通过Ｘ射线衍射和ＳＥＭ二次电子能谱等检测实验,找出了气敏元件灵敏度降低的原因．     

变电站电压无功优化控制器

根据电网的终端变电的二次母线（１０ｋＶ或３５ｋＶ）的接线特点,以母线电压和网损作的目标函数,以有载调压变压器和并联电容器作为调节手段,推导出变电站电压无功控制器的控制规律,并着重分析了抽头变化、并联电容器的投切效果与系统网络参数的关系。此外本文还论述了ＶＱＣ变电站电压无功能控制器的硬件、软件设计思想、主要特点及采用的新技术;介绍了现场运行的情况;提出了ＶＱＣ－Ⅱ型变电站电压无功控制器对ＶＱＣ－Ⅰ型     

MoO_3、NiO、ZnO在小表面金红石上的分散行为

氧化物、盐类在氧化物载体表面的自发分散是一种广泛存在的现象，文献中已报导过大量氧化物和盐类在高比表面载体上分散的研究结果［'－3］TIO。作为一种较新型的载体，与Y－AI。O。、硅胶等传统载体相比，有许多不同特性．活性组分在TIO。表面的分散状态及所得催化剂的性能已有不少报导［'－'］，但所用的TIOZ主要是较高比表面的锐钛矿型TIOZ（刘金红石型TIO。（r）和锐钛矿型TIOZ（a）的结构不同，它是高温生成相，比表面较小［'］．氧化物在金红石上的分散行为仍未见报导．我们制备了三种具有不同比表面的TIO水），系统地研…     

MoO＿3／（TiO＿2－SiO＿2）催化剂的表面分散状态及催化性能的研究

用气相流动吸附法（ｇｒａｆｔｉｎｇ）制备复合载体，用浸渍法（ｉｍｐｒｅｇｎａｔｉｏｎ）制备ＭｏＯ３／（ＴｉＯ２－ＳｉＯ２）催化剂．应用ＬＲＳ和ＴＰＲ技术研究ＭｏＯ３在复合载体ＴｉＯ２－ＳｉＯ２表面的分散状态，发现ＴｉＯ２在ＳｉＯ２表面的分散可增强ＭｏＯ３与载体之间的相互作用，提高ＭｏＯ３在载体表面的分散阈值．催化剂的活性评价在固定床中压反应装置中进行，以６９％（ｗｔ）环己烷、２０％（ｗｔ）的环己烯、１０％（ｗｔ）的苯、１％（ｗｔ）的噻吩混合液为反应液，以噻吩、环己烯和苯的转化率作为催化剂的ＨＤＳ、ＨＹＤ、ＢＨＤ活性指标．结果表明，经ＴｉＯ２调变后，其ＨＤＳ、ＨＹＤ、ＢＨＤ活性都较原来高，对于不同ＭｏＯ３含量的ＭｏＯ３／（ＴｉＯ２－ＳｉＯ２），ＨＤＳ、ＨＹＤ催化性能测试发现，当ＭｏＯ３含量低于分散阈值时，其ＨＤＳ、ＨＹＤ活性随ＭｏＯ３含量线性上升，但在高于分散阈值后，几乎保持不变．该催化剂对苯几乎没有加氢活性，显示出很高的环己烯加氢选择性．通过分散阈值与其ＨＤＳ、ＨＹＤ活性的关系可知，分散阈值可作为优化加氢精制催化剂配比的一个重要参数，具有较强的实际意义     

1D + 1D model of a DMFC: localized solutions and mixedpotential

Our 1D + 1D model of DMFC reveals a new effect. At infinitely small total current in the cell, near the channel inlet forms a “bridge”, a narrow region with finite local current density. The bridge short-circuits the electrodes, thus reducing cell open-circuit voltage. In our previous work the effect is described for the case of equal methanol λ^a and oxygen λ^c stoichiometries. In this Letter, we analyze the general case of arbitrary λ^a and λ^c. In the case of λ^a > λ^c current may occupy finite domain of the cell surface. Asymptotic solution for the case of λ^a  λ^c shows, that the size of this domain is proportional to oxygen stoichiometry. In the opposite limit of λ^a  λ^c local current exponentially decreases with the distance along the channel. Asymptotic solutions suggest that the bridge forms regardless of the relationship between λ^a and λ^c. In all cases local current density in the bridge increases with the rate of methanol crossover and decreases with the growth of the “rate-determining” stoichiometry. The expression for voltage loss at open-circuit is derived.     

氧化物载负型沸石催化剂的阈值效应

用一系列氧化物，如Ｂ２Ｏ３，Ｓｂ２Ｏ３和ＭｇＯ，对ＨＺＳＭ－５沸石以及用Ｓｂ２Ｏ３对Ｈβ沸石进行改性。实验结果表明，这些氧化物可在沸石上自发单层分散且大部分分散的氧化物处于沸石孔内。用ＸＲＤ及ＸＰＳ方法测得它们的分散阈值。实验中发现，在甲苯烷基化反应中，对二甲苯选择性随氧化物含量增加而迅速提高；当氧化物在ＨＺＳＭ－５上的载量接近其分散阈值时，对二甲葳选择性达到最大，对某些体系可高达９５％左右，百在     

Study of reactive ion etching of Si and SiO2 for CFxCl4−x gases

A parametric study of the etching of Si and SiO₂ by reactive ion etching (RIE) was carried out to gain a better understanding of the etching mechanisms. The following fluorocarbons (FCs) were used in order to study the effect of the F-to-Cl atom ratio in the parent molecule to the plasma and the etching properties: CF₄, CF₃Cl, CF₂Cl₂, and CFCl₃ (FC-14, FC-13, FC-12, and FC-11 respectively). The Si etch rate uniformity across the wafer as a function of the temperature of the wafer and the Si load, the optical emission as a function of the temperature of the load, the etch rate of SiO₂ as a function of the sheath voltage, and the mass spectra for each of the FCs were measured. The temperature of the wafer and that of the surrounding Si load strongly influence the etch rate of Si, the uniformity of etching, and the optical emission of F, Cl, and CF₂. The activation energy for the etching reaction of Si during CF₄ RIE was measured. The etch rate of Si depends more strongly on the gas composition than on the sheath voltage; it seems to be dominated by ion-assisted chemical etching. The etching of photoresist shifted from chemical etching to ion-assisted chemical etching as a function of the F-to-Cl ratio and the sheath voltage. The etch rate of SiO₂ depended more strongly on the sheath voltage than on the F-to-Cl ratio.     

基于定向纳米碳管气体放电的气敏传感器研究

介绍了一种基于定向纳米碳管的气敏传感器,以生长定向纳米碳管的氧化铝模板作为阳极,铝板作为阴极,利用纳米碳管的尖端发射效应,在较低的电压下使气体产生放电现象。通过对纳米碳管在气体中击穿电压和放电电流的测量,实现对气体的定性定量检测。同时纳米碳管气敏传感器还具有体积小、灵敏度高、稳定性好、响应速度快、在常温常压下即可进行检测等优点,具有较好的应用前景。     

Surface analysis of plasma‐treated polydimethylsiloxane by x‐ray photoelectron spectroscopy and surface voltage decay

Surface states of polydimethylsiloxane (PDMS) treated by plasma were investigated by x‐ray photoelectron spectroscopy and surface voltage decay. X‐ray photoelectron spectroscopy confirmed the formation of a silica‐like (SiO_x, x = 3–4) oxidative surface layer. This layer increased in thickness with increasing exposure duration of plasma. Plasma exposure lowers the surface resistivity from 1.78 × 10¹⁴ to 1.09 × 10¹³ Ω □^?1 with increasing plasma treatment time. By measuring the decay time constant of surface voltage, the calculated surface resistivity was compared with the value measured directly by a voltage–current method; good agreement between the two methods was obtained. It was observed that plasma treatment led to a decrease in the thermal activation energy of the surface conduction from 31.0 kJ mol^?1 for an untreated specimen to 21.8 kJ mol^?1 for a plasma‐treated specimen for 1 h. Our results allow the examination of effects of plasma on the electrical properties of PDMS. Copyright © 2003 John Wiley & Sons, Ltd.     

A study for quality evaluation of Taxilli Herba from different hosts based on fingerprint-activity relationship modeling and multivariate statistical analysis

In this study, a fingerprint-activity relationship modeling between chemical fingerprints and antirheumatic activity was established, and multivariate statistical analysis was used to evaluate the quality of Taxilli Herba (TH) from different hosts. Characteristic fingerprints of 20 batches of TH samples were generated by high-performance liquid chromatography coupled with triple quadrupole-time of flight tandem mass spectrometry (HPLC-Triple TOF-MS/MS), and the similarity analysis was calculated based on thirteen common characteristic peaks by hierarchical clustering analysis (HCA). Subsequently, nine efficacy markers were discovered by combining fingerprints and antirheumatic activity through grey correlation analysis (GCA) and bivariate correlation analysis (BCA). Meanwhile, the content of 5 constituents in 9 markers was determined by high-performance liquid chromatography coupled with triple quadrupole-linear ion trap tandem mass spectrometry (HPLC-QTRAP-MS/MS). The comprehensive quality of TH was assessed using multivariate statistical analysis, including principal components analysis (PCA) and technique for order preference by similarity to ideal solution (TOPSIS). The results showed that a high dose of TH extract could markedly ameliorate arthritis damage compared to other doses, with flavonoids playing an important role in the antirheumatic activity. The comprehensive quality of samples from Morus alba L. (SS) was superior to those from Liquidambar formosana Hance (FXS). The present study will demonstrate the markers associated with efficacy, and provide an applicable strategy for more comprehensive quality control and evaluation of TH.