第I种非对称三态叠加多模叠加态光场的高次和压缩——第一正交分量的N次方H压缩效应

构造了第孙中禹种强度不等的非对称三态叠加多模叠加态光场|ψ₁^(ABC)〉_q.利用多模压缩态理论研究了态|ψ₁^(ABC)〉_q第一正交分量高次和压缩.结果发现:①当构成态|ψ₁^(ABC)〉_q的三个多模相干态光场的强度不相等时,在一定条件下,态|ψ₁^(ABC)〉_q的第一正交分量可出现任意幂次的高次和压缩.②当上述的三个多模相干态光场强度相等时,态|ψ₁^(ABC)〉_q的第一正交分量的高次和压缩现象消失.在这种情况下,态|ψ₁^(ABC)〉_q的第一正交分量恒处于NH最小测不准态.     

Probabilistic Teleportation of a Three-Particle State

A scheme for teleporting a three-particle state is proposed when three pairs of entangled particles are used as quantum channels. Quantum teleportation can be successfully realized with a certain probability if the receiver adopts an appropriate unitary-reduction strategy. The probability of successful teleportation is determined by the smaller coetficients of the three entangled pairs.     

高温超导体的结构组装

 在总结铜氧化物高温超导体晶体结构特点的基础上，提出了以无限层结构Cu-O钙钛矿为核心的结构组装概念，通过和相关结构的外延组合，衍生出了高温超导体的主要晶体构型。进一步运用此观念，建立了新的三元数命名法，并对高温超导体的晶体结构进行了归类。     

三要素产出函数中技术要素的突变特性研究

在一定的假设条件下 ,构建包括劳动、资本和技术要素在内的三要素产出函数。将技术作为状态变量 ,劳动和资本分别作为控制变量 ,运用突变理论中的尖点突变模型讨论三要素产出函数中技术不同于普通生产要素的特殊性 ,也即技术非连续变化条件下 ,生产要素技术投入的各种突变情况     

一类三参数混沌动力学系统模型及其在经济增长研究中的应用

从非线性自回归模型Xt+1=-αXtλ+1+βXt+γ出发,通过变量替换Xt=aYt,推出三参数混沌动力学系统模型Yt+1=kYt(1-Ytλ)+c;采用线性回归与非线性回归相结合的改进的混合法,对模型参数作了估计;实际研究表明,该模型可以用于对国内生产总值GDP增长的研究.     

试论《化学教学论》教材的修订——从六大类中学化学教材内容的编排顺序谈起

现行《化学教学论》教材将典型教学示例放在化学教学原则之后，致使整本教材缺乏逻辑性，不符合当前创新能力培养的要求，不利于坚定师范生从事教育事业的信心，笔者认为应先讲教学示例、后授教学原则。     

Effect of the three-body force on triton asymptotic normalization constants by the hyperspherical harmonics expansion method

We investigate the change in the calculated value of asymptotic normalization constant (ANC) by the hyperspherical harmonics expansion method with the inclusion of three nucleon force (3BF) in addition to two nucleon force. We see that ANC does not change very much with the inclusion of 3BF indicating that the 3BF does not alter the asymptotic behaviours of HHE wavefunction significantly.     

三维内肋管内插入螺旋扭带的强化传热实验

本文分别以水和乙二醇为工质，在Ｒｅ数范围为：６００～４００００，Ｐｒ数范围为：５．５～１１０之间，对四根分别插入三种不同扭率螺旋扭带的三维内助管内的换热和流阻特性进行了实验研究。结果表明：三维内肋管内加装扭带的强化传热技术适用于低Ｒｅ数下高Ｐｒ数工质的管内对流换热强化。根据实验值得到了流阻和换热关联式。     

Inviscid,laminar and turbulent opposed flows

This paper attempts to reproduce numerically previous experimental findings with opposed flows and extends their range to quantify the effects of upstream pipes and nozzles with inviscid, laminar and turbulent flows. The choice of conservation equations, boundary conditions, algorithms for their solution, the degree of grid dependence, numerical diffusion and the validity of numerical approximations are justified with supporting calculations where necessary. The results of all calculations on the stagnation plane show maximum strain rates close to the annular exit from the nozzles and pipes for lower separations and it can be expected that corresponding reacting flows will tend to extinguish in this region with the extinction moving towards the axis. With laminar flows, the maximum strain rate increased with Reynolds number and the maximum values were generally greater than with inviscid flows and smaller than with turbulent flows. With large separations, the strain rates varied less and this explains some results with reacting flows where the extinction appeared to begin on the axis. The turbulent‐flow calculations allowed comparison of three common variants of a two‐equation first‐moment closure. They provided reasonable and useful indications of strain rates but none correctly represented the rms of velocity fluctuations on the axis and close to the stagnation plane. As expected, those designed to deal with this problem produced results in better agreement with experiment but were still imperfect. Copyright © 2004 John Wiley & Sons, Ltd.     

狄拉克方程的单旋量解法以及由此引起的认识上的差异

把狄拉克方程分解成了两个单旋量的联立方程组．指出现行的自旋理论仅考虑了其中的一个方程，是以一个单旋量代替双旋量来描述状态而建立起来的．笔者在认同现行自旋理论可以作为狄拉克方程的一种求解方法，因而同意其中的某些提法外，对于其主要的物理观念：微观粒子存在着独立于现实的位形空间之外的一个自旋空间，在这个自旋空间内禀着角动量S和磁矩μ；这个自旋理论是相对论性量子力学导出的必然结论等等看法予以否定．笔者认为，只有同时考虑两个单旋量的方程，同时计及两个单旋量，才能准确地描述状态，从而正确地描述客观规律．