Versatile light‐responsive organogels: Evaluation of their dye releasing and photoinitiation behaviors

Light‐responsive crosslinked structures were prepared by a straightforward quaternization strategy using chloride functional polystyrene copolymers and commercially available Michler's ketone with varying feed ratios. Resulting organogels demonstrated excellent solvent absorption and their swelling characteristics were altered by UV‐light irradiation. According to scanning electron microscope images, UV‐illuminated samples showed an obvious photodecomposition, which enhanced their solvent uptake capacity with increase of UV exposure. Additionally, release behavior of eosin Y as a model compound was determined by UV–vis and fluorescence spectrometers. Achieved photoactive gels were also employed as the reusable heterogeneous initiators for photoinduced free‐radical polymerization of methyl methacrylate. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1275–1282     

Ultrasound-aided rapid and enhanced adsorption of anionic dyes from binary dye matrix onto novel hematite/polyaniline nanocomposite: Response surface methodology optimization

In recent times, polyaniline (PANI), a conducting polymer, has been studied widely for environmental remediation application due to its controllable electric conductivity with high surface area, which makes it a suitable adsorbent material. But lower mechanical stability of PANI is considered to be a serious drawback for its large-scale industrial application. To improve the mechanical strength of PANI, in this study, hematite nanoparticles were impregnated onto PANI by oxidative polymerization method in order to fabricate a novel organometallic nanocomposite (hematite-PANI-NC). The hematite-PANI-NC was used as adsorbent for removal of methyl orange (MO) and eosin yellow (EY) dye from binary dye matrix under ultrasonic-assisted adsorption. Excellent MO and EY dye removal (more than 98%) was observed from binary matrix at a wide solution pH from 2.0 to 6.0, and under ultrasound wave the adsorption equilibrium was achieved within 15 min only. Both MO and EY dyes adsorption experimental data strictly followed Langmuir isotherm, and maximum monolayer adsorption capacity of 126.58 mg/g and 112.36 mg/g was observed for MO and EY dye, respectively. The uptake mechanism of MO and EY dyes onto hematite-PANI-NC is governed by electrostatic interaction, π-π bonding and hydrogen bonding between dye molecules and nanocomposite. Response surface methodology analysis reveals maximum MO and EY removal of 98.43% and 99.35% at optimum experimental conditions. This study implies that the hybrid organometallic material hematite-PANI-NC has high potential for quick and enhanced sono-assisted uptake of anionic dyes from water near neutral solution pH.     

Adsorption of a cationic water-soluble dye onto cationic Langmuir–Blodgett films via nano clay platelets: An efficient approach to control the H-dimer

This communication reports the successful adsorption of a water-soluble cationic fluorescent dye Acridine Orange (AO) onto Langmuir–Blodgett (LB) films of a cationic amphiphile octadecylamine (ODA) in the presence of nano-clay platelets hectorite. Acridine orange (AO) has been widely used as a stainer for the characterization of biopolymers. But AO has a tendency to form non-florescent H-dimer even in the aqueous solution. Anionic nano-clay platelets hectorite played an important role in controlling the H-dimer formation of AO in the hybrid film. Effects of various parameters in the adsorption process were investigated in detail.     

Molecular Design Principles for Near‐Infrared Absorbing and Emitting Indolizine Dyes

Desirable components for dye‐sensitzed solar cell (DSC) sensitizers and fluorescent imaging dyes include strong donating building blocks coupled with well‐balanced acceptor functionalities for absorption beyond the visible range. We have evaluated the effects of increasing acceptor strengths and incorporation of dye morphology controlling groups on molar absorptivity and absorption breadth with indolizine donor‐based dyes. Indolizine‐based D –A and D –π–A sensitizers incorporating bis‐rhodanine, tricyanofuran (TCF), and cyanoacrylic acid functionalities were analyzed for performance in DSC devices. The TCF derivatives were also evaluated as near‐infrared (NIR)‐emissive materials with the AH25 emissions extending past 1000 nm.     

Kinetic and thermodynamic studies on the adsorption behavior of Rhodamine B dye on Duolite C-20 resin

The adsorption behavior of Rhodamine B dye from aqueous solutions was investigated onto the cation-exchange resin, Duolite C-20 (hydrogen form). The effects of various experimental factors; sorbent amount, contact time, dye concentration and temperature, were studied by using the batch technique. Lagergren pseudo-first-order equation shows good applicability with high correlation coefficients for all ranges of initial dye concentrations and at different temperatures. This equation was used to describe the kinetics of the dye adsorption process. The adsorption constants were evaluated by using both the Langmuir and Freundlich adsorption isotherm models. Thermodynamic parameters were obtained and it was found that the adsorption of Rhodamine B dye onto Duolite C-20 resin was an endothermic and spontaneous process at the temperatures under investigation.     

Photoelectric response of thiamonomethinecyanine J-aggregate nanoribbons deposited via dielectrophoresis technique

Different dyes can produce the two-dimensional self-assembled structures called J- and H-aggregates that make them attractive material for various nano-electronics applications. This paper shows that electrokinetic deposition technique of cyanine dye J-aggregates is appropriate for the photoelectric devices production. The influence of excitation in visible on conductivity is observed in J-aggregate channel structure deposited using dielectrophoresis technique. The effect was observed in self-assembled thiamonomethinecyanine nanostructures. Samples were analyzed using AFM and micro-Raman spectroscopy methods. Analysis shows that photoelectric response must be the result of conductive channel formation in the structure of J-aggregate between the electrodes. The observed increase in conductivity manifold exceeds the structure dark conductivity: maximal increase comprised 6.3 times.     

Synthesis and Characterization of a Thiophene Copolymer for Photovoltaic Application

A soluble thiophene copolymer having polar and non polar side groups was synthesized and its photovoltaics performance was investigated. The synthesized copolymer was characterized using Nuclear Magnetic Resonance (NMR) and optical spectroscopy. Dye sensitized solar cells were fabricated using this copolymer as sensitizer. An open-circuit voltage of 0.50V, a short-circuit current density of 1.195 mA/cm² and an overall power conversion efficiency of 0.3% were measured.     

Study on Dyeing Properties of Functional Acrylic Fiber

Anti‐mite acrylic fiber is a new type of functional fiber which incorporates a small amount of anti‐mite agent. Basic dye can be used in the dyeing of the functional acrylic fiber. Compared with the dyeing properties of conventional fibers, the dyeing properties of the functional acrylic fiber have new characteristics such as different dyeing temperature, time, amount of leveling agent and pH level due to the rough surface and larger size of micro‐channels in the functional fiber structure that helps basic dye molecules to diffuse into the fiber.     

ZnFe2O4/Ag/TiO2复合材料的制备及其光催化性能

以硝酸银、钛酸四丁酯、无水氯化锌、六水氯化铁为原料,采用溶胶-凝胶法与溶剂热相结合的方法制备了ZnFe₂O₄/Ag/TiO₂复合材料,通过扫描电子显微镜、能谱分析仪、X射线粉末衍射仪、X射线光电子能谱仪、振动样品磁强计、紫外可见分光光度计对样品进行表征及测试。结果表明： ZnFe₂O₄/Ag/TiO₂-10具有最佳的光催化效果,在紫外和可见光下对染料的降解率都能达到90%以上,具有优异的紫外可见光光催化活性。ZnFe₂O₄/Ag/TiO₂具有独特的磁性,能在外部磁场作用下进行回收利用,这使其在实际应用中成为可能。通过磁分离技术重复回收利用5次后仍然保持优良的光催化性能,说明ZnFe₂O₄/Ag/TiO₂-10具有优异的磁性及较高的光催化循环稳定性。     

骨架结构多孔TiO2薄膜增强染料敏化太阳能电池性能

以空心球状TiO₂为基体、以片状TiO₂为骨架,采用刮刀法制备了染料敏化太阳能电池的多孔TiO₂光阳极薄膜。光电转化效率测试结果表明,当作为骨架支撑材料的片状TiO₂含量为20wt%时,光阳极薄膜组装成太阳能电池的光电转化效率达到最高值4.53%,比商业P25制备的无孔无骨架TiO₂薄膜电池(4.06%)及无骨架结构的多孔TiO₂薄膜电池(4.17%)的性能均有显著提高。当片状TiO₂的最佳含量为20wt%电池薄膜厚度为33 μm时,太阳能电池光电转化效率进一步提升为7.06%。光电性能增强的原因是骨架结构有利于快速传输电子并增大染料吸附量。本研究通过设计制备具有骨架结构的多孔TiO₂薄膜为提高染料敏化太阳能电池性能提供了新的思路。