XPS,AFM, ATR and TPD evidence for terraced,dihydrogen terminated, 1×1 (100) silicon

Heating (100) silicon at high temperature (say, higher than 850 °C) in H₂, cooling to 670–700 °C in the same ambient, and quenching to room temperature in N₂ results in environmentally robust, terraced 1 × 1 (100) SiH₂. Evidence for this conclusion is based on angle‐resolved x‐ray photoelectron spectroscopy, atomic force microscopy, infrared absorption spectroscopy in the attenuated total reflection mode, thermal programmed desorption, and reflection high‐energy electron diffraction. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis, Characterization and Thermal Decomposition Mechanism of Cetyltrimethyl Ammonium Tetrathiotungstate

The synthesis, characterization and thermal decomposition mechanism of cetyltrimethyl ammonium tetrathiotungstate （CTriMATT） were studied herein. The as-synthesized CTriMATT was characterized by Elemental analysis, X-ray diffraction （XRD）, Fourier transform infrared （FT-IR）, Ultraviolet visible （UV-Vis） spectra. The results showed that the as-synthesized CTriMATT had high purity and good crystallinity. The introduction of alkyl groups induced a shift of the stretching vibration band of W-S bond to lower wavenumber, while it had no influence on the position of WS4^2-. Thermogravimetric analysis （TG）, differential thermal analysis （DTA） and in situ XRD characterizations revealed that CTriMATT began to decompose at 423 K in nitrogen and was converted to WS2 eventually. In addition, the decomposition product of CTriMATT at 673 K in nitrogen was characterized by N2 adsorption （BET） and scanning electron microscopy （SEM）. The results demonstrated that WS2 with higher specific surface area, and pore volume could be obtained from the thermal decomposition of CTriMATT in nitrogen.     

A comparative study on the thermal decomposition of some transition metal carboxylates

Thermal decomposition of transition metal malonates, MCH₂C₂O₄?xH₂O and transition metal succinates, M(CH₂)₂C₂O₄?xH₂O (M=Mn, Fe, Co, Ni, Cu, Zn) has been studied employing TG, DTG, DTA, XRD, SEM, IR and Mössbauer spectroscopic techniques. After dehydration, the anhydrous metal malonates and succinates decompose directly to their respective metal oxides in the temperature ranges 310–400 and 400–525°C, respectively. The oxides obtained have been found to be nanosized. The thermal stability of succinates have been found to be higher than that of the respective malonates.     

碳化钨负载S2O8^2-/ZrO2固体超强酸催化剂上的正戊烷反应研究

首次研究了碳化钨负载S2 O2 -8 ZrO2 (PSZ)固体超强酸催化剂 (WC PSZ)上正戊烷的反应情况及影响催化剂活性的各种因素 ,并用GC MS ,XRD ,BET等手段分析了正戊烷反应产物和催化剂的物理化学性质等 .结果表明 :WC PSZ对正戊烷具有异构化和裂解的双重催化作用 .PSZ在负载适量碳化钨后对正戊烷反应的活性和选择性显著提高 ,显示出优于Pt PSZ催化剂的效果 ,碳化钨的负载量为 2 0 %的效果最佳 .适当的焙烧、活化和反应温度等条件是取得良好反应效果的关键     

Crystallization of chiral compounds. 1. Spectroscopic,thermochemical, and crystallographic investigation of homochiral and racemic glycidyl p-toluenesulfonate

Crystalline specimens of homochiral and racemic glycidyl p-toluenesulfonate were studied by IR spectroscopy, differential scanning calorimetry, and X-ray diffraction analysis. The melting phase diagram of glycidyl p-toluenesulfonate was constructed. The stacking effect in the crystals of the racemic sulfonate is responsible for a more dense molecular packing, with the result that a heterochiral type of crystallization becomes more favorable.     

Emanation Thermal Analysis of SiC Based Materials

Results of emanation thermal analysis (ETA) characterizing microstructure changes of SiC based materials during heat treatment in argon are demonstrated. This method made it possible to reveal fine changes of the texture of SiC nano-sized powders, SiC micro-sized powders and SiC whiskers under in situconditions of the heating. ETA curves can serve as fingerprints of the respective samples.This revised version was published online in November 2005 with corrections to the Cover Date.     

Process study of thermal plasma chemical vapor deposition of diamond,part II: Pressure dependence and effect of substrate pretreatment

The effect of pressure during thermal plasma chemical vapor deposition of diamond films has been investigated for a pressure range from 100 to 760 Torr. The maximum growth rate in our experiments occurs at 270 Torr for substrate temperatures around 1000°C. The existence of an optimum pressure for diamond deposition may he related to the balance between generation and recombination of atomic hydrogen and carbon-containing active species in front of the substrate. To estimate the concentrations of atomic hydrogen and methyl radicals under thermal plasma conditions, calculations based on thermodynamic equilibrium have been performed. This approximate evaluation provides useful guidelines because rapid diffusion results in a near frozen chemistry within the boundary layer. The effect of substrate pretreatment on diamond deposition depends on the type of substrate used. Two growth modes have been observed-layer growth and island growth of diamond crystals on various substrates. Screw dislocations have been observed in diamond deposition in thermal plasmas, and defects such as secondary nucleations are more concentrated along (III) directions than along (100) directions.     

Synthesis and characterization of liquid‐crystalline polyphosphonates containing disubstituted ferrocene esters as mesogens

A series of ferrocene‐containing liquid‐crystalline polyphosphonates with an even number of methylene groups are reported. All the polymers gave birefringent melts. The mesophase was identified as transparent with an increase in the spacer. The effects of pendant substitution and the spacer were studied with thermogravimetric analysis and differential scanning calorimetry. The effects of the phosphonate group in the spacer and the ferrocene ester group in the mesogen were examined. The presence of a steplike mesogenic structure and a pendant phenyl group in the spacer led to reductions in the glass‐transition and melting temperatures. The ferrocene moiety in the mesogen might be one of the reasons for the increased thermal stability and decreased liquid crystallinity. An energy‐minimized structure for the mesogenic and spacer segments was created with computer‐modeling programs, and it suggested the reason for the reductions in the glass‐transition and melting temperatures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2256–2263, 2002     

Thermal characterization of social vespid silk

In this paper we try to establish a link between the microclimate in the wasp nest and the structure and thermal stability of vespid silk. We suggest that there are at least two types of water that is absorbed by the silk of Oriental hornets, namely, surface water and intrinsic structural water. The release of both types of water was found to be reversible. The enthalpy values of the endothermic peaks associated with the release of water from different silk samples do not differ substantially and are in the range of 106 to 130 J g^-1 for the Vespa orientalis male larvae silk (sample #1), Paravespula germanica (yellowjacket) worker larvae silk (#3) and Vespa orientalis nest envelope(#4). For the Vespa orientalis worker larvae silk (sample #2), however, it is twice as large (228 J g^-1). This is in agreement with the increased total amount of absorbed water. The silk studied has a fibrilar structure with interconnecting surfaces overlying entire regions. It is assumed that the initial water loss stems from water evaporation from the coat of the fibers - a daily occurrence in the hornets' nest. Heating to above 70°C may result in structural changes in the silk core. This revised version was published online in July 2006 with corrections to the Cover Date.     

The Synthesis of Levyne-Type Zeolite Studied by Thermal Analysis of Methylquinuclidine Aluminosilicate Gels

DSC, TG and quadrupole mass spectrometer data concerning methylquinuclidinium iodide (MeQ1), dried precursor gel, and crystalline levyne-type zeolite are discussed together with the thermal degradation of MeQ1 mixed with single inorganic components of the gel. It is shown that MeQ⁺ions play a role in the organization of the gel structure. This revised version was published online in July 2006 with corrections to the Cover Date.