A new technique for spatially resolved thermal lensing measurements

A new method is presented for spatially resolved thermal lensing measurements using multiple narrow probe beams and a two-dimensional array detector. The method is applied to an Er, Tm, Ho: YAG laser rod. No significant deviation from a parabolic temperature profile has been found although there is extraordinarily strong thermal lensing in the crystal. Thermo-optical constants of the material are reported.     

Thermal conductivity of poly(vinyl chloride)/polycaprolactone blends

Thermal diffusivity, heat capacity, and density of polyvinyl chloride/polycaprolactone (PVC/PCL) blends were measured by the laser flash method, DSC, and pycnometry, respectively. The thermal conductivity of the PVC/PCL blends was determined from the results. The miscibility of the blend and crystallinity of PCL were determined by DSC. The effect of blend structure on thermal conductivity is discussed. The phase compositions of the PVC/PCL blends are of three types depending on PCL content: i.e., up to 33%, from 33 to 70%, and above 70% PCL by weight. Thermal conductivity, thermal diffusivity, and heat capacity of the PVC/PCL blends are strongly affected by the phase composition of the blend, which changes in a complicated way with PCL content. © 1994 John Wiley & Sons, Inc.     

Towards understanding the increase in strength of thermotropic polyesters with heat treatment

Thermotropic copolyester fibers of oxynaphthoate and oxybenzoate have been subjected to conditions that promote solid-state polymerization as well as annealing. The annealing process causes the crystals to perfect with a simultaneous increase in heat of fusion and melting temperature. Solid-state polymerization, a reaction rate-controlled process, causes the polymer viscosity average molecular weight to increase by chain extension from about 14,000 g/mole to more than 87,000 g/mole with a simultaneous impressive increase in tenacity from about 10 g/d (1.2 GPa) to almost 30 g/d (3.7 GPa). To understand the changes in mechanical properties, we have modeled the fiber structure as short rod-like molecules poorly bonded to a continuous matrix of parallel molecules. Lengthening of the reinforcing molecules facilitates better transfer of load from matrix to molecules, resulting in higher tenacity fibers. © 1994 John Wiley & Sons, Inc.     

现代技术中的微量级热现象

近年来，在制造具有新颖结构的微型器件和材料（例如微电子器件、微机电系统和各种先进材料）方面取得了巨大的进展。这种发展使得热科学领域中的热现象。从发生在大量级结构中转移到发生在级结构中。对于更好地理解和控制能量传递而言，这种转移既提出了挑战又提供了机遇。本文从微尺寸、微结构和微时间三方面说明了上述微量级热现象。     

On interrelation between the internal pressure and the cohesion energy density

The question about the definition of the “internal pressure” concept is being discussed. It is shown that the previously found differential relation between the cohesion energy density and the internal pressure is one of the examples of an absolutely general interrelation between definitely connected differential functions. It is ascertained that the ratio (the internal pressure divided by the cohesion energy density) is a structuresensitive parameter inherent to the calorific (thermal) equation of a liquid state.     

钢液定氧测头响应时间和热平衡态

本文分别研究了ＺｒＯ２（ＭｇＯ）固体电解质管头壁厚，参比电极量对定氧测头响应时间的影响，得出了以ＺｒＯ２管头壁厚为０．６０－０．８０ｍｍ，Ｃｒ／Ｃｒ２Ｏ３参比电极加入量为４０－６０ｍｇ所组成的定氧测头响应速度最快，同时采用了“双偶法”对定氧测头在工作过程中的热平衡态进行了研究。结果表明：氧浓差电池中的传热是响应过程的控速步骤，氧电势曲线上峰值的产生是起源于电池中的热平衡态。     

热爆热挤钛镍合金的简易装置设计原理

设计了热爆热挤钛镍合金的简易装置 ,可以达到工艺要求 ,并可初步实现自动控制     

硼中子俘获治疗的蒙特卡罗方法模拟

用通用蒙特卡罗程序MCNP模拟了粒子在人脑中的输运过程. 吸收剂量率主要来自以下四个反应:¹⁰B(n,α)⁷Li,¹⁴N(n,p)¹⁴C,¹H(n,γ)²D,快中子弹性散射反应.对肿瘤区的贡献主要来自硼中子吸收反应.结果表明,超热中子比热中子适合于深肿瘤的治疗,而热中子对浅肿瘤的治疗有优越性,比如皮肤癌.同确定论方法的结果相比,蒙特卡罗方法不失为一种模拟中子俘获治疗的好工具.     

Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

热工设备的模糊设计方法

该文运用模糊数学理论分析热工设备设计的不确定性问题，讨论模糊设计方法的应用，以热管式空气预热器为例进行模糊设计计算。