内含热薄透镜CW色心激光腔的振荡光束特性

运用像镜原理分析三镜折迭腔、四镜折迭腔和四镜8字型环形腔等光学谐振腔的振荡光束特性及其热行为。讨论热效应对谐振腔振荡光束特性的影响规律以及像镜分析方法的精确性,给出谐振腔的热不灵敏条件。     

液体分子自由程压力系数与温度系数研究

Ｊａｃｏｂｓｏｎ在Ｅｙｒｉｎｇ分子模型基础上提出了液体分子自由程理论．根据这个理论，液体分子自由程即分子表面之间的距离应为Ｌ＝２Ｖａ／Ｙ．本文在Ｊａｃｏｂｓｏｎ理论基础上，给出了液体分子自由程压力系数与温度系数两个参量，研究了部分烷烃、烯烃、醇、苯及其卤代物的自由程压力系数与温度系数．在以后的研究中，我们还发现这两个参量与分子力及液体声速系数有密切联系     

矩形板极限承载能力的探讨

船舶及钻井平台等的上层建筑和潜水器内部平面舱壁板，大多采用弹塑性设计．考虑到这种舱壁板是一次性承载，为提高舰船或平台的承载能力，减轻重量，以提高经济性和增加有效载荷，采用屈服线分析法设计上述壁板，并从理论计算和试验两个方面对该方法进行了探讨，得到了板的极限承载能力的数据并提出了该设计方法下的安全系数．     

Structural and electrical properties of crystalline (1−x)Ta2O5−xTiO2 thin films fabricated by metalorganic decomposition

Polycrystalline (1−x)Ta₂O₅−xTiO₂ thin films were formed on Si by metalorganic decomposition (MOD) and annealed at various temperatures. As-deposited films were in the amorphous state and were completely transformed to crystalline after annealing above 600 °C. During crystallization, a thin interfacial SiO₂ layer was formed at the (1−x)Ta₂O₅−xTiO₂/Si interface. Thin films with 0.92Ta₂O₅–0.08TiO₂ composition exhibited superior insulating properties. The measured dielectric constant and dissipation factor at 1 MHz were 9 and 0.015, respectively, for films annealed at 900 °C. The interface trap density was 2.5×10¹¹ cm⁻² eV⁻¹, and flatband voltage was −0.38 V. A charge storage density of 22.8 fC/μm² was obtained at an applied electric field of 3 MV/cm. The leakage current density was lower than 4×10⁻⁹ A/cm² up to an applied electric field of 6 MV/cm.     

Some Properties of an Operator on L^∞（△） and Its Applications

In this paper, we introduce an operator Hμ（z） on L^∞（△） and obtain some of its properties. Some applications of this operator to the extremal problem of quasiconformal mappings are given. In particular, a sufficient condition for a point r in the universal Teichmfiller space T（△） to be a Strebel point is obtained.     

Metal complexation of crosslinked polyacrylamide-supported dithiocarbamates: Effect of the molecular character and extent of crosslinking on complexation

Dithiocarbamate functions were incorporated into different polyacrylamide matrices crosslinked with a flexible and hydrophilic crosslinking agent, tetraethyleneglycol diacrylate (TEGDA), and their complexation behaviours were investigated. Crosslinked polyacrylamides with varying extents of the tetrafunctional TEGDA crosslinks were prepared by free radical solution polymerization at 60°C using potassium persulphate as initiator in ethanol. The dithiocarbamate functionality was incorporated into these polyacrylamides by a two-step polymer-analogous reaction involving (i)trans-amidation with ethylenediamine and (ii) dithiocarbamylation of the aminopolyacrylamide with carbon disulphide and alkali. The complexations of dithiocarbamate with Cu(II), Ni(II), Zn(II), Co(II) and Hg(II) ions were followed under different conditions. The metal ion intake varied with the extent of the crosslinking agent and the observed trend in complexation is Hg(II) > Cu(II)> Zn(II)> Co(II)> Ni (II). The time-course of complexation, the possibility of recycling, swelling characteristics, and spectral and thermal analyses were carried out. The thermal stability increases upon complexation with metal ions.     

Behaviors of the positive temperature coefficient of resistance of poly(styrene‐co‐n‐butylacrylate) filled with Ni‐plated core‐shell polymeric particles

Conductive composite films of poly(styrene‐co‐n‐butylacrylate) copolymers filled with low‐density, Ni‐plated core‐shell polymeric particles were prepared and their behaviors of positive temperature coefficient of resistance (PTCR) were investigated. When the conductive fillers in the composite film were loaded beyond the critical volume, 10 up to 25 vol %, composite films exhibited a unique electrical resistant transition behavior, which the electrical resistance rapidly increased by several orders of magnitude at the critical temperature. The PTCR transition temperature, in general, occurred before the glass transition temperature of polymer matrix. Further increased the conductive filler loading to 30 vol %, the overpacked conduction paths were formed in the entire composite and the PTCR effects became blurred. While the composite film treated with thermal cycle several times from room temperature up to 120 °C, the electrical resistivity increased accompanied with the shift of the PTCR transition to lower temperature. The reason might have been caused by the formed interfacial cracks within the composite film. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 322–329, 2007     

Thermal Behavior of Urea-(D) Tartaric Acid and Urea-(DL) Tartaric Acid Crystals

The thermal behavior of two new non-linear optical (NLO) materials, urea-(D) tartaric acid (UDT) and urea-(DL) tartaric acid (UDLT) were studied by using DSC, TG and TMA. The results show that: 1) The two crystals have different melting points but similar decomposition temperatures due to the influences of intermolecular forces, which is attributed to the stereo effects of (D)-tartaric and (DL)-tartaric acid molecules; 2) There was only thermal expansion and no thermal contraction when the UDT and UDLT crystals were heated; 3) There was no phase transition within the measured temperature range; 4) The thermal expansion of the UDT and UDLT crystals shows a small anisotropy; 5) The specific heats of UDT and UDLT change linearly with temperature in the measured temperature range and the value for UDT is 1.321 J g-1 K-1 at 320 K while the specific heat of UDLT is 1.357 J g-1 K-1 at the same temperature. This revised version was published online in July 2006 with corrections to the Cover Date.     

一维半导体的光学吸收

研究一维半导体在外电磁场中的光吸收、涉及电子带间的直接跃迁与间接跃迁，考虑了电子－空穴相互作用的激子光吸收，导出一维半导体的光吸收系数公式。