人体形态学参数的回归方程

在汉纳范模型的基础上，增加了３个有关躯干的围度指标。通过代表人体主要特征的形态学参数，利用逐步回归分析法，建立回归方程。用以预测那些不易测准或需专门测量仪器检测的参数，简化了模型的个体化过程。     

凝胶萃取过程中的溶质分配和凝胶滞胀

在Flory理论的基础上,用凝胶网络弹性自由能的标度关系推导分析了滞胀度和分配系数的表达式及其影响因素。结果表明很多情况下不能用凝胶在纯溶剂中的平衡溶胀度来估计凝胶萃取的浓缩能力。理论上还预示进入凝胶网络中的溶质量随凝胶致密程度的增加和溶质分子尺寸的增加而减小,这表明凝胶网络对大分子溶质的排斥是一种热力学效应。     

负电子亲和势GaAs光电阴极中的三光子激发和发射的理论研究

将三阶微扰理论应用于单晶GaAs半导体,结合与实际相接近的能带结构,得到了GaAs中三光子吸收系数的解析式表达式,在考虑了激发电子的逃逸过程的情况下,进而推导了负电子亲和势GaAs光电阴极中三光子光电发射的发射系数的解析表达式.两表达式得到的理论数值分别与用ns量级脉宽、2.06μm波长的激光测得的GaAs中三光子吸收系数和GaAs(Cs,O)光电阴极中三光子发射系数的实验值相比较,吻合较好.     

Relations among eigenvalues of Sturm-Liouville problems with different types of leading coefficient functions

For any Sturm-Liouville problem with a separable boundary condition and whose leading coefficient function changes sign (exactly once), we first give a geometric characterization of its eigenvalues λn using the eigenvalues of some corresponding problems with a definite leading coefficient function. Consequences of this characterization include simple proofs of the existence of the λn's, their Prüfer angle characterization, and a way for determining their indices from the zeros of their eigenfunctions. Then, interlacing relations among the λn's and the eigenvalues of the corresponding problems are obtained. Using these relations, a simple proof of asymptotic formulas for the λn's is given.     

Ageing of wet-synthesized oxide powders

Wet chemical synthesis of precursor oxide ceramics is a method to obtain small particulate powders. Such powders are far more prone to ageing in air than more traditional precursors. Thermogravimetric analysis is used to highlight the species responsible for the ageing of ceramic precursors. Indeed water and carbon dioxide are observed to evolve from aged powders. Ceramics obtained from aged precursors can reach a very low final density with respect to the theoretical value. A large degree of the original sintering properties can be recovered after washing the aged powders with ethanol in a basic medium.     

对期望理论的两个重要推进——损失厌恶系数λ及参考点研究

行为金融学是近20年来最为重要的新兴金融理论,期望理论更是其中的亮点,其运用领域之广超乎人们的想象,所以对它的完善改进具有非常重要的意义。本文对期望理论中的损失厌恶系数和参考点问题进行了深入研究,并且得出了创新性的结果:损失厌恶系数不是常数而是动态变量;得出了内生且纳入更多投资者行为特征的参考点。这些结果是对期望理论的重要改善和推进,对其在大量金融领域和涉及到财富偏好的问题的解决中都大有裨益。     

On the Use of the Restitution Condition in Flexible Body Dynamics

The difference between the classical treatment offlexible body impact and the treatment of impact in flexiblemultibody dynamics is due to several fundamental reasons. Inthe classical impact theory, simple structures such as beamsand plates are used. Infinite dimensional models can bedeveloped for these simple structural elements to study theimpact dynamics and the wave propagation problem. Flexiblemultibody impact problems, on the other hand, involve bodieswith complex geometry that cannot be modeled using infinitenumber of degrees of freedom. Furthermore, the classicalimpact theory has been mainly concerned with the impactbetween a rigid mass that moves without constraints beforeit impacts a simple flexible structure. This is not amultibody simulation scenario in which the impact occursbetween kinematically constrained bodies that are subjectedto impulsive constraint forces in addition to the impactforces. These constraint forces can influence the motion ofthe two bodies immediately after impact, and as aconsequence, the simple classical theory scenario of impactdoes not apply. It is the objective of this paper to discussthe use of the restitution condition in flexible multibodyimpact problems and demonstrate that the use of thisapproach does not exclude the classical formulation.Nonetheless, the impulse momentum balance approach can serveas an effective and efficient procedure for solving theimpact problem in finite dimensional models that do not obeythe classical wave theory. Energy results of simplestructural elements are presented in order to demonstratethe consistency of using the impulse momentum balanceapproach in solving impact problems in finite dimensionalflexible body applications.     

Graphitic nanofillers in PMMA nanocomposites—An investigation of particle size and dispersion and their influence on nanocomposite properties

Mechanical, thermal, and electrical properties of graphite/PMMA composites have been evaluated as functions of particle size and dispersion of the graphitic nanofiller components via the use of three different graphitic nanofillers: “as received graphite” (ARG), “expanded graphite,” (EG) and “graphite nanoplatelets” (GNPs) EG, a graphitic materials with much lower density than ARG, was prepared from ARG flakes via an acid intercalation and thermal expansion. Subsequent sonication of EG in a liquid yielded GNPs as thin stacks of graphitic platelets with thicknesses of ～10 nm. Solution‐based processing was used to prepare PMMA composites with these three fillers. Dynamic mechanical analysis, thermal analysis, and electrical impedance measurements were carried out on the resulting composites, demonstrating that reduced particle size, high surface area, and increased surface roughness can significantly alter the graphite/polymer interface and enhance the mechanical, thermal, and electrical properties of the polymer matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2097–2112, 2007     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: Thermal treatment effect

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher than 2 MPa, the carbon dioxide solubility is larger in PLA 80:20 than in PLA 98:2, indicating that the L:D plays a dominant role on this property. The thermal treatments only affect the gas solubility in PLA 98:2. Sorption isotherms at temperatures 303, 313, and 323 K, below the glass transition temperature of the polymer, and pressures up to 5 MPa were measured and analyzed with three different models, the dual‐mode sorption model, the Flory–Huggins equation, and a modified dual‐mode sorption model where the Henry's law term was substituted by the Flory–Huggins equation. This last model performs especially well for CO₂ in PLA 80:20, due to the convex upward curvature of the solubility isotherms for that system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 616–625, 2007