Thermogravimetric study of the pyrolysis of waste wood

A thermogravimetric study of the pyrolysis of three different types of waste wood (forest wood, old furniture and used pallets) is carried out in a TGA equipment using dynamic and isothermal techniques. Isothermal runs were carried out at two temperature levels, one between 225° and 325°C (low range) and the other, between 700° and 900°C (high range). Results show a good agreement between the kinetic parameters obtained from either dynamic or isothermal techniques. It must be remarked that the own chemical composition of each type of wood together with the compounds added to the wood for each application, play a fundamental role in the kinetic behavior of their thermal decomposition.     

New sterically hindered di-o-quinones of the biphenyl series

New di-o-quinones of the biphenyl series, namely, 2,2′-dialkyl-5,5′-di-tert-butylbiphenyl-3,4,3′,4′-diquinones, were synthesized. Their structures were established by IR and NMR spectroscopy. The molecular structure of 2,2′-dimethyl-5,5′-di-tert-butylbiphenyl-3,4,3′,4′-diquinone was established by X-ray structural analysis. The structure is characterized by orthogonal (the torsion angle is 82.9°) mutual arrangement ofo-benzoquinone fragments. ESR studies demonstrated that chemical reduction of diquinone proceeds in four oneelectron stages to form paramagnetic mono- and trianions as intermediates. Quinopyrocatechols, which are intermediates in the synthesis of di-o-quinones, were isolated and characterized. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 4, pp. 804–809, April, 1997.     

Unsteady incompressible flow of magnetized aluminium oxide and titanium oxide nanoparticles with blood base fluid

In this investigation, a mixed convective nanoparticles fluid flow over an inclined plate is deliberated. The effects of slip boundary wall and magnetic field are also considered. The dimensionless governing system for the considered problem is attained by implementing recent definitions of fractional derivatives (FD). The generalized solution is obtained through the Laplace Transformation Scheme (LTS) for the momentum and thermal expressions. To improve the novelty and to demonstrate some more physical perception of the stated research work, some remarkable special cases of velocity distribution through CF and AB-fractional derivative concept are addressed, whose daily life implication is well known in the existing literature. Moreover, to evaluate the physical interest of the stated problem, the outcomes of the obtained system graphical illustrations are made by utilizing MATHEMATICA. As a result, we concluded that the aluminium oxide $A{l}_2{O}_3$ nanoparticles show more decaying behavior as compared to titanium oxide $Ti{O}_2$ nanoparticles for temperature and velocity profile. Furthermore, both fields i.e., momentum and thermal distributions are increased with the help of rising estimations parameter. Current results report novel applications in enhancement of heat transfer, thermal engineering, chemical processes, engineering and electronics devices, solar systems, extrusion processes, fission reactions etc.     

Thermal analysis of PMMA/gel silica glass composites

Thermal analysis of poly-methylmethacrylate (PMMA) impregnated porous gel silica glasses confirms that the PMMA chains form hydrogen bonds with the pore surface silanol groups. The adopted conditions for the insitu polymerisation result in about 4% of residual monomers trapped in the polymer, most of them in the amorphous structure. The polymer and monomer mixture takes up the whole of the free pore volume. Most of the residual monomer polymerises during the DSC scans above the glass transition temperature providing an excellent probe for the weak glass transition. Polymerisation in the gel silica glass medium affects the glass transition temperature, the length of polymer chains, and the degree of polymerisation.     

Optimisation of stir bar sorptive extraction for the analysis of volatile phenols in wines

An easy, fast and reliable analytical method is proposed for the determination of the concentration of volatile phenols (ethyl- and vinylphenols) in wines. The novel stir bar sorptive extraction (SBSE) technique is employed, following a simple and fast procedure that allows 15 samples to be extracted simultaneously using very small sample volume. Extracts are desorbed in a thermodesorption system (TDS) coupled on-line to a gas chromatograph-mass spectrometry system. The SBSE offers better recovery and linear regression coefficient (r2) for the four volatile phenols than solid-phase extraction (SPE). The mass spectrometric detection in selected ion monitoring mode contributes to the lower detection limit and good sensibility obtained with this method.     

Critical Comparison of Four Simple Adaptors for Flow Amperometric and Stripping Voltammetry with Mercury Drop Electrodes in Batch Cells

Electrochemical batch cells with mercury drop electrodes, MDEs, are readily available from a number of producers and widely used in electroanalysis for polarography, voltammetry and stripping voltammetry. To increase sample throughput and reduce reagent and sample consumption, the tendency is to couple the MDE with flow analysis systems (e.g., FIA, SIA or BIA). Many special flow cells for MDEs are described in the literature, but it is easier to convert existing commercial batch cells to flow operation. To assess the performance of such flow adaptors, four models were chosen because they are directly fitted to the glass capillary of any MDE, light enough not to impair the mechanical drop knocker and can be effortlessly built in the laboratory. They were all found adequate for flow amperometry and stripping voltammetry, with differences in sensitivity, flow rate dependence, response time, drop stability, tolerance to bubbles, uncompensated resistance and recontamination of disposed analyte from the electrolytic bath. Two of them, a simple L‐shaped PTFE tube and an upstream nozzle holder made from a disposable pipette tip, gather a larger set of desirable features.     

A method for correcting the contact angle from the θ/2 method

The θ/2 method, a widely used technique on measuring the contact angle of a sessile drop, assumes that the drop profile is part of a sphere. However, the shape profile of a sessile drop is governed by the Young–Laplace equation and is different from a sphere, especially for drops with a large bound number (e.g. large volume or small surface tension). The spherical assumption, therefore, causes errors on evaluating the contact angles. The deviation of contact angle from the θ/2 method is evaluated from a theoretical calculation in this work. A simple means is given for correcting the measurement error. The corrected angle results from the drop volume, surface tension, liquid density and the contact angle from θ/2 method. An algorithm for finding the correct contact angle without knowing the density and surface tension is also given. At the end, two examples of pendant drops are given for the illustration.     

The Comparison of the Orientation of Sodium 3-Hydroxy-2-Naphthalenecarboxylate in the Cavity of β-Cyclodextrin and Heptakis-(2,3,6-Tri-O-Methyl)-β-Cyclodextrin

Conformational analysis of inclusion complexes of sodium 3-hydroxy-2-naphthalenecarboxylate with -cyclodextrin and heptakis-(2,3,6-tri-o-methyl)--cyclodextrin in D₂O was investigated by 1D and 2D ¹HNMR measurements. The results show that part of the naphthyl group of sodium 3-hydroxy-2-naphthalenecarboxylate is situated in the 2,3-OH side of the -cyclodextrin cavity asymmetrically while the whole naphthyl group is included in the heptakis-(2,3,6-tri-o-methyl)--cyclodextrin cavity with the caboxylate and hydroxy group close to the 6-OCH₃ group.     

Thermogravimetry as a screening tool for the estimation of the vapor pressures of pure compounds

A simplified approach was developed to estimate the vapor pressure of pure compounds from experimental data obtained by isothermal thermogravimetric (TG) analysis. A numerical procedure was developed to estimate the Antoine parameters of the substance by the analysis of isothermal TG data. The results of the experimental validations carried out evidenced that at least a preliminary estimation of vapour pressures of pure substances by the analysis of TG data is possible. The limited time and the reduced amounts of sample required for the experimental runs make the technique attractive with respect to the conventional and more accurate techniques for vapor pressure assessment.     

4-Hydroxy-2-quinolones 120. Synthesis and structure of ethyl 2-hydroxy-4-oxo-4H-pyrido-[1,2-a]pyrimidine-3-carboxylate

An improved method for the preparation and purification of ethyl 2-hydroxy-4-oxo-4H-pyrido[1,2-a]-pyrimidine-3-carboxylates is proposed. According to ¹H and ¹³C NMR spectroscopic data the synthesized compounds exist in DMSO solution in the 2-hydroxy-4-oxo form while in the crystal (at least for the case of the unsubstituted derivative) X-ray analysis shows that it occurs in the bipolar 2,4-dioxo form. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 864–876, June, 2007.