人工全髋关节置换术研究现状与展望

人工全髋关节置换术(Total hip arthroplasty THA)是治疗终末期髋关节疾病的快速恢复髋关节功能的有效方法之一,现就人工全髋关节置换术中假体的材料应用与界面配伍、微创手术入路选择、数字骨科发展对THA的意义、手机APP在康复指导和追踪随访中的应用等几方面进行综述.     

Fluorine in Shark Teeth: Its Direct Atomic‐Resolution Imaging and Strengthening Function

Atomic‐resolution imaging of beam‐sensitive biominerals is extremely challenging, owing to their fairly complex structures and the damage caused by electron irradiation. Herein, we overcome these difficulties by performing aberration‐corrected electron microscopy with low‐dose imaging techniques, and report the successful direct atomic‐resolution imaging of every individual atomic column in the complex fluorapatite structure of shark tooth enameloid, which can be of paramount importance for teeth in general. We demonstrate that every individual atomic column in shark tooth enameloid can be spatially resolved, and has a complex fluorapatite structure. Furthermore, ab initio calculations show that fluorine atoms can be covalently bound to the surrounding calcium atoms, which improves understanding of their caries‐reducing effects in shark teeth.     

Influence of methyl‐modified silyl groups on the properties of polymers and Si/B/N/C ceramics derived from N‐silylated borazine derivatives

Thermal silazane cleavage of dichloroboryldisilylamines (SiCl_mMe_3?m)N(SiMe₃)(BCl₂) (1: m = 1; 2: m = 2) at 196 °C leads to the borazine derivates [(SiCl_mMe_3?m)NB(Cl_nMe_1?n)]₃ (3: m = 1, n = 0.185; 4: m = 2, n = 0.111) characterized by NMR and IR spectroscopy and mass spectrometry. Single‐crystal X‐ray diffraction structure analyses reveal (BN)₃ units with unusual twisted boat conformations in both compounds. Additionally, more detailed studies are done to clear up the function of the by‐products (SiCl_mMe_3?m)N(SiClMe₂)(BClMe) formed during the cyclization step leading to asymmetrically boron substituted borazine derivatives. The single‐source precursors 3 and 4 were cross‐linked with methylamine producing polymers 3P and 4P, which were transformed into black amorphous materials with ceramic yields of 20.8 % and 50.3 %, respectively. Ceramic 4C (Si_1.00B_0.98 N_2.55 C_1.37O_0.05) was further investigated by ¹¹B and ²⁹Si magic angle spinning (MAS) NMR spectroscopy. A combined study of high‐temperature TG analyses and X‐ray powder diffraction analyses confirms the thermal stability of 4C up to 1670 °C. Copyright © 2012 John Wiley & Sons, Ltd.     

Effects of BaCu（B2O5 ） addition on sintering temperature and microwave dielectric properties of Ba5Nb4O15–BaWO4 ceramics

The effects of BaCu(B2O5)(BCB) addition on the microstructure, phase formation, and microwave dielectric properties of Ba5Nb4O15–BaWO4ceramic are investigated. As a sintering aid, BaCu(B2O5) ceramic could effectively lower the sintering temperature of Ba5Nb4O15–BaWO4ceramic from 1100?C to 950?C due to the liquid-phase effect. Meanwhile,BaCu(B2O5) addition effectively improves the densification of Ba5Nb4O15–BaWO4ceramic and significantly influences the microwave dielectric properties. X-ray diffraction analysis reveals that Ba5Nb4O15and BaWO4coexist with no crystal phase of BaCu(B2O5) in the sintered ceramics. The Ba5Nb4O15–BaWO4ceramics with 1.0 wt% BaCu(B2O5) sintered at 950?C for 2 h presents good microwave dielectric properties of εr = 19.0, high Q × f of 33802 GHz and low τfof2.5 ppm/?C.     

Influence Of Zro2 on The Physicochemical Properties of Phosphate-Based Glasses and Glass Ceramics

Abstract

Phosphate-based bioactive glasses and their glass ceramics for 47P₂O₅– (30.5)CaO–(22.5 ? x)Na₂O–xZrO₂ for different ZrO₂ contents (x = 0, 1.5, 3.0, 4.5, and 6.0 mol%) were prepared through melt quenching and controlled heat treatment procedures. The amorphous nature of glasses and the presence of crystalline phases in glass ceramics were studied by means of X-ray diffraction (XRD) studies. The density, molar volume, ultrasonic velocities, attenuation, elastic constants, and microhardness of glass and glass ceramics were used to study the structural changes. The formation of hydroxyapatite layer on the surface of glasses and glass ceramics after immersion in simulated body fluid (SBF) was explored through XRD, Fourier transform infrared (FTIR), and scanning electron microscopy (SEM) analyses. The results indicate that the added ZrO₂ increases the crosslink density of glasses, resulting in network stability, and also induces the formation of an apatite layer on the surface of glasses.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Biparametric potentiometric analytical microsystem for nitrate and potassium monitoring in water recycling processes for manned space missions

The construction and evaluation of a Low Temperature Co-fired Ceramics (LTCC)-based continuous flow potentiometric microanalyzer prototype to simultaneously monitor the presence of two ions (potassium and nitrate) in samples from the water recycling process for future manned space missions is presented. The microsystem integrates microfluidics and the detection system in a single substrate and it is smaller than a credit card. The detection system is based on two ion-selective electrodes (ISEs), which are built using all-solid state nitrate and potassium polymeric membranes, and a screen-printed Ag/AgCl reference electrode. The obtained analytical features after the optimization of the microfluidic design and hydrodynamics are a linear range from 10 to 1000 mg L⁻¹ and from 1.9 to 155 mg L⁻¹ and a detection limit of 9.56 mg L⁻¹ and 0.81 mg L⁻¹ for nitrate and potassium ions respectively.     

Effects of AlN on the densification and mechanical properties of pressureless-sintered SiC ceramics

In the present work, Si C ceramics was fabricated with Al N using B_4 C and C as sintering aids by a solid-state pressureless-sintered method. The effects of Al N contents on the densification, mechanical properties, phase compositions, and microstructure evolutions of as-obtained Si C ceramics were thoroughly investigated. Al N was found to promote further densification of the Si C ceramics due to its evaporation over 1800 °C,transportation, and solidification in the pores resulted from Si C grain coarsening. The highest relative density of 99.65% was achieved for Si C sample with 15.0 wt% Al N by the pressureless-sintered method at 2130 °C for 1 h in Ar atmosphere. Furthermore, the fracture mechanism for Si C ceramics containing Al N tended to transfer from single transgranular fracture mode to both transgranular fracture and intergranular fracture modes when the sample with 30.0 wt% Al N sintered at 1900 °C for 1 h in Ar. Also, Si C ceramics with 30.0 wt% Al N exhibited the highest fracture toughness of 5.23 MPa m~(1/2) when sintered at 1900 °C.     

A new sol–gel processing routine without chelating agents for preparing highly transparent solutions and nanothin films: engineering the role of chemistry to design the process

The great sensitivity of titanium alkoxides to hydrolysis makes their sol–gel transformation very fast and thus difficult to control. A method was proposed to alleviate this drawback. Preparation of highly transparent solutions and nanothin films is another objective of the present research. Employing nanoemulsion method and optimizing the processing conditions, a clear solution of well-dispersed nanosized particles was obtained. With the proposed process BaTiO₃ precursor sols and nanothin films with enhanced optical transparency towards the visible were prepared. The optimal formulation of the sol consists of acetic acid, barium acetate, 2-propanol, TTIP and deionized water with 6:1:1:1:150 M ratios, respectively. It was found that the reduction of the temperature in the initial stage of mixing of precursors controls the size of the forming species and accordingly improves the stability and transparency of the sol. The results also showed that the applied modifications and optimizations significantly downsize the particles within the sol to the nanometric scale and accordingly result in a significant improvement in the optical response of the products.     

Conversion of Mg‐Li Bimetallic Alloys to Magnesium Alkoxide and Magnesium Oxide Ceramic Nanowires

Technologically important composites with enhanced thermal and mechanical properties rely on the reinforcement by the high specific strength ceramic nanofibers or nanowires (NWs) with high aspect ratios. However, conventional synthesis routes to produce such ceramic NWs have prohibitively high cost. Now, direct transformation of bulk Mg‐Li alloys into Mg alkoxide NWs is demonstrated without the use of catalysts, templates, expensive or toxic chemicals, or any external stimuli. This mechanism proceeds through the minimization of strain energy at the boundary of phase transformation front leading to the formation of ultra‐long NWs with tunable dimensions. Such alkoxide NWs can be easily converted in air into ceramic MgO NWs with similar dimensions. The impact of the alloy grain size and Li content, synthesis temperature, inductive and steric effects of alkoxide groups on the diameter, length, composition, ductility, and oxidation of the produced NWs is discussed.     

In-Situ Synthesis and Characterization of Nanocomposites in the Si-Ti-N and Si-Ti-C Systems

The pyrolysis (1000 °C) of a liquid poly(vinylmethyl-co-methyl)silazane modified by tetrakis(dimethylamido)titanium in flowing ammonia, nitrogen and argon followed by the annealing (1000–1800 °C) of as-pyrolyzed ceramic powders have been investigated in detail. We first provide a comprehensive mechanistic study of the polymer-to-ceramic conversion based on TG experiments coupled with in-situ mass spectrometry and ex-situ solid-state NMR and FTIR spectroscopies of both the chemically modified polymer and the pyrolysis intermediates. The pyrolysis leads to X-ray amorphous materials with chemical bonding and ceramic yields controlled by the nature of the atmosphere. Then, the structural evolution of the amorphous network of ammonia-, nitrogen- and argon-treated ceramics has been studied above 1000 °C under nitrogen and argon by X-ray diffraction and electron microscopy. HRTEM images coupled with XRD confirm the formation of nanocomposites after annealing at 1400 °C. Their unique nanostructural feature appears to be the result of both the molecular origin of the materials and the nature of the atmosphere used during pyrolysis. Samples are composed of an amorphous Si-based ceramic matrix in which TiN_xC_y nanocrystals (x + y = 1) are homogeneously formed “in situ” in the matrix during the process and evolve toward fully crystallized compounds as TiN/Si₃N₄, TiN_xC_y (x + y = 1)/SiC and TiC/SiC nanocomposites after annealing to 1800 °C as a function of the atmosphere.